How to deal with the glaze layer of ceramic tiles, what is the matter with the thin skin of the glaz

This problem in your home is very common in the current home decoration, and this situation is mainly caused by the following aspects:

1. The anti-cracking performance of ceramic tiles is poor.

This is caused by the quality of the tile itself, mainly due to the small density of the tile and the high water absorption.

2. When the tile touches the corner, the bottom edge destroys the glaze layer on the edge.

In the process of paving the corners of the ceramic tiles of the kitchen and bathroom, in order to make the tile more beautiful, the general method is to grind the bottom edge of the two rows of tiles connected at the corner at a 45-degree angle, and then bite together, if in the process of the embryo bottom, the 45-degree chamfering edging edge is not paid attention to, it will destroy the embryo glaze bonding layer of the tile, so that the anti-cracking performance of the edge part of the tile is weakened, and the porcelain is cracked in the later stage.

3. The base layer at the corner is not properly handled.

The cracking of this situation is relatively easy to appear at the corner of the flue, and now there are many non-standard construction personnel in the construction, using the large core board to wrap the flue, and then pasting tiles on it, the large core board is easy to deform after contacting the cement, which will also cause the tile to crack.

4. The mixing ratio of cement mortar is not right or the grade of cement is too high.

If the grade of cement is too high or the cement content is too high when the cement and sand are mixed, the expansion coefficient of the cement is too large, which will also cause the problem of cracking of the tile. The tiles are paved with ordinary Portland cement with a grade of 425, and the ratio of cement to sand is 1:3.

5. The seam in the corner is too small.

Any object will have the phenomenon of thermal expansion and cold contraction, and ceramic tiles are no exception, if the gap is too small, there will also be tile cracking or glaze peeling.

The factors in all of the above aspects may have the problem you are talking about. The first of them is the quality of the tile, and the latter several reasons are construction problems.

According to your situation, whether it is a product quality problem or a construction problem, it is a problem that belongs to the developer, and it is recommended to directly find the property company or developer for maintenance.

Change Bricks **My username is your service.

1. Tile problem

After the tile absorbs moisture, the brick expands. If you encounter cold weather again, the skin will peel. cracks, and even cracks.

Peeling of bathroom wall tiles may also be improper maceration of tiles. Due to the poor impregnation of the tile, the surface tile is too dry, which leads to the rapid reflow of the adhesive layer, and the tile bond is firm, but it also dries due to the failure to soak the tile, and there is even floating water on the surface of the tile.

2. The grassroots level has not been dealt with well

If the base surface is too smooth, making the block too dry will cause the foundation water level to recover quickly. Due to the lack of frictional resistance and critical water, the adhesive layer and base layer are difficult to bond tightly. It will cause the bathroom wall tiles to peel.

How to deal with tile peeling:

1. If the area of tile peeling is relatively small, you can use floor tile repair agent to repair.

2. However, if the area of the tile peeling is relatively large and the problem is serious, all the tiles should be removed and re-paved.

3. When carrying out the construction of the base layer, it is necessary to deal with the stains on the wall in advance, and at the same time, the wall should be watered and moistened one day in advance.

Summary. Dear, there are several reasons why the ceramic tile glaze will fall off the porcelain as soon as it is touched.

Dear, there are several reasons why the ceramic tile glaze will fall off the porcelain as soon as it is touched.

1. The quality of the tile itself is not good, including the poor workmanship of the tile, the water absorption rate of the tile is too high, and the phenomenon of tile deglazing will occur after the tile is pasted. 2. Hollow tiles and hollow tiles in all parts, because of the ceramic tile fitting, improper bonding with cement, impact and other reasons, will cause the tile hollowing, the surface glaze falls off. 3. When the thermal expansion and cold contraction tiles are laminated, the problem of cohesion and seam is not dealt with, and there is not enough gap between the tiles, which leads to the thermal expansion and cold contraction of the tile, and the glaze of the porcelain itself is separated from the brick, and the problem of deglazing on the surface of the ceramic tile appears.

4. When the back stain tile is pasted, the back and wall stains cause the tile to be not tight and unstable, resulting in the phenomenon of falling off and falling off the glaze.

Dear, if you have any other questions, you can contact me!

For the problem of how to remove the glaze of the tile, it is recommended to solve it by sanding.

For the problem of how to remove the glaze of the tile, it is recommended to solve it by sanding.

What to grind with.

If the amount is small, you can use sandpaper, and if the amount is large, it is recommended to use a sander, but be careful, because the tiles stop fragile.

Can sulfuric acid work?

There is also this method for strong acid infiltration, but since I have not found any examples of use, it is recommended that you try it as well.

I'm sticking the bricks, and pouring sulfuric acid water on top of the tiles, okay?

Since it is a strong acid, there are certain dangerous ingredients in the operation, so you should use it carefully.

Nowadays, most people will put tiles when decorating, which is not only beautiful and elegant, but also easy to clean. So how to repair the glaze of the tile? Next, let's follow together to understand, first, how to repair the tile glaze.

1. First of all, you need to clean the surface layer of the tile, if there are more stains, we can use water to rinse. 2. Then take putty powder or glass glue to flatten the glaze, and then fill it with ceramic tile glaze repair agent after it dries. 3. Finally, polish it several times until the tile recovers its gloss.

Second, what are the brands of ceramic tiles?

1. Asia tile.

The brand was founded in Taiwan in 1973, registered a trademark in Shanghai in 1993, and listed in Singapore in 1998, establishing Singapore Asia Group Holdings. Up to now, Asia has won the honors and titles of China Environmental Protection Product Certification, National Quality Trustworthy Products, National Quality and Service Integrity Excellent Enterprise, and British Standard BSI Certification.

2. Gold medal Asian tiles.

The brand was established in 2004 and is one of the high-end brands in China. The company has super strength, and has invested heavily to establish a large-scale production base in Guangdong, which is currently one of the largest production bases of glazed interior wall tiles in the world. The company has also established its own R&D center, introduced advanced production equipment at home and abroad, and the daily output of glazed wall and floor tiles has reached 17,000 square meters of lines, and the daily output of porcelain tiles has reached 25,000 square meters.

3. Diamond tile Asia tile.

The brand has decades of development history, headquartered in Guangdong, with solid financial strength and standardized management system. There is also a professional R&D team and management elite, and has established an independent R&D base, which is a comprehensive modern enterprise integrating product R&D, production, sales and service.

Article summary: Okay; Today I shared with you how to repair the glaze of ceramic tiles and what brands of ceramic tiles are introduced here, friends who need more information, please continue to pay attention to Qeeka Home, we will have more exciting content for you in the future.

Ceramic tile I believe everyone will be familiar with it, we all know that it is a more commonly used material at home, but the material is used for a long time to wear out the glaze, this time will make people feel particularly annoyed, will find some way to repair it. Let's introduce to you how to repair the glaze of the tile.

1. For the repair of this condition, the first thing to do is to pay attention to it before glazing, and it is necessary to reduce the water absorption of the glaze, so as to improve the formula of the glaze, and at the same time to improve the elasticity of the glaze, and when paving, at this time, you can use cement and fine sand, and at the appropriate time, you can use more coarse sand, which also improves the speed of water volatilization, and also reduces the shrinkage force.

2. The floating layer of the surface of the brick body must be cleaned up, if the conditions permit, it is best to use high-pressure water to wash, for the local damage part, it can be repaired and leveled, the surface of the tile is best to use an electric grinding wheel to grind the surface a little, which can also increase the roughness.

3. If the brick surface is cracked or uneven, it needs to be replaced, at this time, the brick can be carefully broken, and then pry around the brick at this time, you can remove the brick to be replaced, and repair it again.

How to care for floor tiles:

1. For floor tiles, this product itself is not so dirt-resistant, and if the stain resistance is not very good, it is necessary to clean it frequently at this time in order to maintain good indoor hygiene, which is also conducive to the maintenance of floor tiles, and is also conducive to people's health.

2. The detergent used is relatively particular, if there is ink, you can use toothpaste to clean, if it is coffee, beer and other stains, you can use dish soap, laundry detergent and other these to clean.

3. In the process of using floor tiles, we know that it is inevitable that they will be stained by oil at this time, so in order to maintain the floor tiles to prevent pollution from tea, rust stains, etc., it is recommended to clean the floor tiles frequently, otherwise it will also reduce its service life.

4. Regular waxing of floor tiles can be said to be a good way to maintain, you must know that waxing can not only increase the waterproofness and anti-fouling of bricks, but also be able to resist some conflicts and bumps, generally speaking, waxing once every 3 months is the most appropriate, so as to ensure that the tiles are as bright as new.

Summary: How to repair the ceramic tile glaze is introduced here, we know that when the tile glaze falls off, it must be repaired according to the actual situation. I hope the above introduction is helpful to you.