The relationship between the ping value and the Windows OS version

Matter. The opposing system can be interpreted based on the return value of the ping.

ttl=32 windows95/98/mettl=128 windowsnt/2000ttl=240 windowsxp

ttl=64 linux kernel

ttl=64 commpaq tru64

ttl=255 sun solaris

ttl=255 freebsd

ttl=255 openbsd

ttl=255 netbsdhp ux

It's not absolute, though, and you can make some changes to cheat, but that's it if you don't have any settings.

I don't know much about ping, but it shouldn't have anything to do with the win version.

What I know about ping is generally based on the speed of the network connection, and the lower the speed, the faster the speed.

There is a connection, but it is also a preliminary judgment, ttl=32 means that the operating system may be win98, if ttl=128, it means that the target host may be win2000, xp; If ttl=250, the target host may be UNIX).

UNIX and UNIX-like operating systems ICMP echo response TTL 255

Compaq TRU64 ICMP Echo Reply TTL 64 Microsoft Windows NT 2K OS ICMP Echo Reply TTL 128

Microsoft Windows 95 operating system ICMP echo response TTL 32

But it's not absolute, because you can modify the TTL value yourself.

You can start in the window -> Run -> type Turn off the firewall and you're good to go.

Find System Security in the Control Panel, then find the Firewall in System Security, then turn off the Firewall, and OK!

In the same network segment, otherwise it will be routed.

You can make a virtual Cisco and do a static route.

The end method said on the first floor is correct.,The default under windows is only ping four packages.,And if you achieve the same effect under windows under linux, you need to add the parameter "-c".

For example, if you want to ping four packets like in Windows, let's say you want to ping, then hit the following command:

#ping -c 4

c represents the number of specified packages, and the following 4 is the specified number of specific packages, you can replace 4 with any number to have the corresponding number.

Finally, it's up to the IP address, which makes no difference!

1. Start the computer with Windows system.

2. After the system starts, press and hold the win key and the r key at the same time to open the run dialog box.

3. Enter "cmd" in the "Open" input box of the dialog box and press the "OK" button to enter the MSDOS interface. cmd is not case sensitive.

4. Enter "ping+space+IP address" in the command and control line. For example, to test whether the loopback address is normal, you can enter ping in the command and control line to test.

5. After the ping command is entered, hit the enter key to display the test result.

6. Close the MSDOS interface. Press and hold Alt+F4 to quickly close the current window.

When using the ping command, add the "-t" parameter to continuously ping the specified IP address until it is manually terminated. To manually terminate, you need to press the Ctrl+C keys on your keyboard.

The following is an example of a continuous ping of an IP address.

ping -t

Enter "cmd" in "Run" and enter it in the window, for example, "ping -t" will be pinged once without adding "-t".

Windows + R, hahahahahahahahahaha

The windows key (the key for the window icon) +r and enter cmd

It's out of the command line window, and it's ready to ping.

Using host-only will do the trick. My virtual machine can communicate with the host, the one selected by the network card, the virtual machine IP setting gateway is, and the IP is set by yourself.

If there is a route, use a bridge, if there is none, use NAT, or change XP to a DHCP server.

It looks like you're bridging net8

Ping on Windows, ping on Linux, as long as it is in an IP segment, it will definitely be able to ping.

If you can't change the nat, you can save a lot of trouble.

It must be in the same network segment, otherwise it will be routed.

You can make a virtual Cisco and do a static route.

Netsh Firewall Set ICMPSETTING 8 so you can ping the server externally It's very easy and practical!

In the same way, if you want to disable ping, you can run the following command:

netsh firewall set icmpsetting 8 disable

Method 2: Firewall Advanced Panel Way 1Go to Control Panel - Administrative Tools - and find "Advanced Security Windows Firewall".

2.Click Inbound Rules.