Which office decoration network cabling is good?

How to design the wiring of the network in office decoration? The problem of strong and weak electrical lines is within the scope of planning and design of office decoration, so network cabling design is very important. Moon Bay Decoration, a Guangzhou office decoration company, believes that the implementation of a unified wiring system standard is more convenient for management and maintenance.

The following points should be paid attention to in the wiring design of the network in office decoration.

1. Reliability.

The design, installation and testing of the wiring system are based on ANSI EIA TIA 568A and GB T50311-200 as the wiring standards, and follow the domestic wiring specifications and test specifications.

2. Reasonableness.

The wiring direction of strong and weak electricity in the office should be reasonably matched and not interfere with each other. Many users use the computer's power supply, **, and network cable at the same time, which is more convenient for future operation and maintenance.

3. Comprehensive.

Office wiring needs to meet the transmission needs of a variety of different analog or digital signals, and all the language, data, images, and monitoring equipment wiring are combined on a set of standard wiring systems, and only a standard connection line is needed between the equipment and the information outlet to connect them through the standard interface.

4. Complementarity of wired and wireless.

According to the specific building environment and office requirements, the wired network and wireless network are generally combined to give full play to their respective strengths to achieve the purpose of our online office.

5. Flexibility.

How many information points are used in each office location, office decoration wiring not only meets the current needs of users, but also meets the expectations of users for future information systems, and data, voice twisted pair cabling should be interchangeable, constituting a complete set of wiring system.

If you take a look at the Central Asia network, I personally think it's good. If you're curious, you can ask.

Chengdu Deyi Mingding decoration project network wiring is very regular, with steel pipes, wire boxes to install the network cables, so that there will be no disconnection when it has been used.

Summary. Network necessities: go to the service provider to pull broadband or fiber, network cable crystal headers, routers, switches, maybe cats.

Other auxiliary materials: tubes, boxes, modules, if you want to get a better computer room, you have to have a cabinet, cable management frame (when there are many network cables), UPS (available or not, to ensure that the network equipment is not powered off), if the company needs rack services, then there must be servers and server-related preparations.

Network necessities: go to the service provider to pull broadband or fiber, network cable crystal headers, routers, switches, maybe cats. Other auxiliary materials:

Tubes, boxes, modules, if you want to get a better computer room, you have to have a bright cabinet, cable management rack (network cable is more than or), UPS (available or not, to ensure that the network equipment is constantly telecommodated), if the company needs to shelf services, then there must be servers and server-related preparations.

Ethernet cable or fiber optic connection switch?

A network cable is also required.

Switches are also needed.

I need to figure out the equipment that I want to connect to after the network cable enters the home, so that the office can function normally.

First of all, the switch definitely needs it.

I know. A networked host, the allocator.

Just set up your computer to be the host.

This computer can be assigned.

Now I am sad to know that the network cable needs to be equipped with the front section of the network cable after entering the home.

That's pretty much enough.

The worst wire is not only thin, but even the iron core (which is copper-plated on the outside), which can be known as soon as you test it with a magnet. For places such as Internet cafes and schools that use a large number of networks intensively, the quality of network cables is very important, especially for diskless network projects. If you are not very professional, you can find products from well-known manufacturers, such as AMP's network cable, which is quite good in terms of quality and reputation, AMP is owned by TE Electronics, but now TE Electronics has changed its name to TE CONNECTIVITY.

There are many impurities in the copper core, cut the copper core skin, pinch the copper core with your hand to make a circle, and see how many times it will break, and the *** is generally more than 25 circles.

Wire skin: Fold the wire 180 degrees, then skim it back to see how resistant the skin is. A good quality network cable, no matter how the skin is folded, it will not be too obvious whitening. The poor ones are obviously very white after being skimmed back. The network cable with a good skin is not easy to break during the construction process.

Look at the thickness, let the merchant take several different lines, the line is obviously "thicker", and the line of about 130 looks like a cowpea that has not been fertilized, thin and soft. Then peel off the outer skin to see the diameter of the copper wire inside, as long as the comparison can be seen immediately.

The easiest way is to get what you pay for, don't try to buy cheap. There are many brands of network cables, if the network requirements are very high, choose six types of network cables, brands can consider Belden, Nexans, Schneider and other joint venture brands, domestic ones, CommScope, An is generally fake. If you are not a professional, it is difficult to distinguish between good and bad only from the naked eye, the basic method is to look at the thickness of the skin, whether the printed logo on the skin is clear, whether the twisted pair is uniform, and the pure copper core should be bright and hard.

Hope it helps.

You can use a CAT6e network cable. Teleportation can go up to 130-150 meters. Amp brand is fine. All copper. The quality of the network cable is generally the diameter and material of the cable. The above is better than the all-copper stamen. Then there is tensile resistance and the outer layer is anti-aging and flame retardant.

Office decoration wiring is a very important step, which needs to be carefully considered and planned to ensure that the wiring arrangement is reasonable, beautiful, safe and reliable. Here are some tips for wiring the wiring:

Easy to build丨Open office.

Before laying out the wires, it must be carefully planned and designed. Factors to consider include the type and number of wires, the location of electrical equipment, the location of outlets, the location of switches, and more. During the planning process, the shortest distance of the wiring path needs to be considered to reduce the loss of the wire, while also ensuring the maintainability and ease of operation of the wire.

When wiring, all wires should be separated and connected to the appropriate equipment as needed. At the same time, it is essential to ensure that each wire has sufficient length and margin for easy connection and maintenance. Hide wires inside walls as much as possible to keep the interior neat and aesthetically pleasing.

Safety is an important consideration for wire routing. Avoid using excessively long wires when routing wires to avoid safety issues such as short circuits and fires. All wires should be kept at a safe distance, and protective equipment such as wire protection pipes and fireproof cloths should be used as needed.

After the wires have been routed, each wire should be marked for easy identification. When it comes to labeling, you can use different colors of wire labels or paper labels to make the wires easier to identify and manage. It is also very important to mark the start and end points of the wire traces for easy maintenance and changes.

When planning wire routing, the possibility of future expansion should be considered. For example, if it is possible to add new equipment or add outlets, you should leave a margin in your planning to facilitate future expansion. In addition, it should be ensured that the wire routing is easy to maintain and change to meet future needs.

Easy to build丨Meeting room.

In conclusion, there are many factors that need to be taken into account when wiring office decoration wires, such as safety, aesthetics, and ease of maintenance. When laying out wires, careful planning and design are required to ensure the shortest distance of the wiring path and the maintainability and ease of operation of the wires. Finally, be sure to label each wire for easy management and change, while considering future expansion needs.

IDetermine the point? 1. The basis for determining the point:

According to the wiring design drawings of the office space, combined with the schematic diagram of the office station, mark the position of the cassette at each point with a pencil, ruler or ink fountain2. Determination of the height of the cassette: Except for special requirements, the height of the cassette is consistent with the original strong current socket, and the height of the background ** tuning switch should be consistent with the height of the original strong electric switch

If there are multiple cassettes together, the distance between the cassettes should be at least 10mmSecond, slotting? 1. Determine the slotting route, according to the following principles:

1. The principle of the shortest route;2. Do not destroy the original principle of strong electricity;3. Do not destroy the waterproof principle

2. Determine the width of the slot: determine the number of PVC pipes according to the number of signal lines, and then determine the width of the slot3. Determine the slotting depth

If 16mm PVC pipe is selected, the slotting depth is 20mm; If 20mm PVC pipe is selected, the groove depth is 25mm3. Wiring? 1. Make sure the cable is unobstructed?

Weak current type Room serial number4. Determine the number of lines in the pipe: the cross-sectional area of the pipeline shall not exceed 80% of the cross-sectional area of the pipe

Fourth, the sealing groove backfill? 1. Fixed cassette: Except for the kitchen and bathroom cassette, which should protrude 20mm from the wall, other cassettes should be flush with the wall.

Several cassettes are required to be on the same level when they are together2. Fixed PVC pipe: ?3. Sealing groove:

The wall and ground after sealing the groove shall not be higher than the plane where it is located4. Clean the construction site: After the sealing is over, remove the garbage and clean the construction site

The above information is provided by Sichuan Langyu Decoration Project. Sichuan Langyu Decoration Company is committed to Chengdu office decoration, Chengdu office decoration and decoration, has a lot of experience in the office decoration process of strong and weak current wiring work, if you want to know more knowledge, you can log in to the company. Hope mine can help you.

Foreword: Nowadays, with the rapid development and popularization of the Internet, network cabling is a very important part of modern office decoration. So what problems should be paid attention to when decorating the Nanchang office?

Incorp Decoration believes that the flexibility of office cabling needs to be considered: how many information points are used in each office location, and the office cabling not only meets the current needs of users, but also meets the user's expectations for future information systems; Data and voice pair stranded cabling should be interchangeable to form a complete cabling system.

Need to consider the comprehensive integration of office cabling: office cabling needs to meet the transmission requirements of various analog or digital signals, and combine all languages, data, images, monitoring equipment cabling in the standard cabling system, equipment and a standard cable is between the information socket needs to connect them through a standard interface.

It is necessary to take into account the rationality of the office integrated wiring: the wiring of the strong and weak current in the office should be reasonably matched, do not interfere with each other, and the appearance should be beautiful; Users should use the computer's power supply, ** and network cable for easy operation and maintenance in the future.

The reliability of office wiring needs to be considered: the products used in the office wiring system in Nanchang must be certified by international organizations. The design, installation and testing of the wiring system are based on ANSI EIA TIA 568A and GB T50311-200 as the wiring standards, and follow the domestic wiring specifications and test specifications.

The above is all the introduction of "how to wire Nanchang office decoration", I hope to provide you with some help.

When laying the network cables, it should be done at the same time as the interior decoration as much as possible. In order to prevent the corrosion of the network cable by the building materials, a wall groove of about 4cm is dug along the wall, and the network cable is inserted into the PVC pipe, buried in the wall groove, and then the wall is decorated.

All cables need to be laid with PVC pipe sets, and the twisting of the cables and 90-degree straight bends should be avoided as much as possible during the threading process.

When the network cable is deployed, try not to deploy it in parallel with the AC power cable, and keep a distance of more than 20cm between the socket and the power socket. to prevent magnetic field interference from alternating current.

The network cable is different from the ordinary cable, in order to ensure higher bandwidth, the quality of the network cable is higher, more than five types of cable need to be used, and the connection of the network cable must be terminated by special modules and connectors.

It is required that the length of the network cable in each room should not exceed 40 meters, and the middle should not be connected, especially not to be used after connecting the shorter network cable with adhesive tape like a power cable.

The entrance network cable can be concentrated together with the entrance to the entrance of the hall in the weak current box.