-
7610 itself is not**mobile phone,So the sound of the speaker is very small,And as Nokia,Its mobile phones are all humanized design,In order not to interfere with others, even if it is**The volume of the mobile phone is relatively small,No**The volume of the mobile phone is of course even smaller,The volume of the copycat machine is super large。 Also,The design of the volume is also related to the speaker of the machine itself,Even if you amplify the sound through some third-party software,Then the speaker is also harmful,It is recommended that the landlord still don't get it。 But I have a way to make the sound bigger, that is, on the computer with the ***gain software to increase the inherent sound of the **, this software is very easy to use, a search on the Internet will be searched, the volume can be set above, the default is 89, you can set it at will, the maximum is 105, but it is recommended not to exceed 100, the sound is a little distorted after more than 100, the best sound is 96-98, the general sound is between 90-94, relatively small.
I believe that the landlord will also feel the *** volume when listening to the song, some of which are big and some are small, and this software can adjust them to a level. This way, you don't have to mess with the sound of your phone.
-
Turn on your phone and clean up the dust from the sound space.
My friend's 7610 is quieter than the other because of the dust inside!
If that doesn't work, the ultimate solution is to change the horn.
Change the horn of the 3250. Sounds good.
-
Change the speaker, flash the phone, install third-party software, you can do it, the sound of 7610 is like this.
-
I'll tell you the truth, brand phones are like this, the sound is super small, if you want to play loud outside, then you can try a copycat phone. The voice was loud.
-
It sounds beautiful every day, and the sound is super loud.
-
No, my 6670 is also time to change.
-
Solution: One is because of the problem of software, it can't be called from the mobile phone settings, and some machines provide machine code, which can be directly operated in the form of a command line, which is a bit similar to the graphical interface of Windows and the DOS command line. The other is the old problem of the components of the microphone and handset, which needs to be taken to the repair center to replace a set.
Many people say that it is no problem to take it for testing and do not replace it, mainly because although the sound is small, it can still be used. It may also be that the quality of the current components is not very stable, and there is a batch of problems when it comes out, and there is no provision that must be recalled. It is best to wait for the warranty period, and then go to another repair center for testing, about a few tens of yuan can be replaced, and you don't have to worry about too much Hui Sosheng.
1.Plug in the headphones first, and then dial fixed**, or fixed** to dial the faulty machine, and see if the sound is normal.
2.Then use the speaker of the mobile phone to dial or answer the fixed** to see if the sound is normal.
Note that the above two test conditions must be fixed**, because there is no signal quality problem for fixed lines, which is easy to judge.
If both sounds are normal, please follow the steps below, if one is not normal, please send it for repair, it is very likely that there is a problem with the audio part of the circuit.
3.Dismantle. The disassembly method of 6600 is very simple, that is, there are several inner cards next to the case, and you can stick it in with your thumb and fingernails, and don't use a screwdriver, it will hurt the case.
4.Pay attention to the position of the earpiece of the upper shell that is removed, and look at the light to see if it is transparent, if it is not transparent, it means that it is blocked by dust, this is the problem, I have no problem with the machine, and by the way, I have cleared the dust, and the sound is a lot louder. The way to clean up the dust is very simple, if there is a precision electrical cleaning agent, spray it directly, if not, go to the repair car where you blow with compressed air, after cleaning, you can see that it has been transparent, because there is a very fine metal filter in the position of the earpiece of the upper shell, to prevent the dust from entering the machine, it is easy to collect dust, resulting in blockage, and the sound becomes smaller.
There is another situation I have seen, it is like this: the mobile phone earpiece is actually a small speaker, in front of it there is a ring fixed with a ring sticker, sometimes this rubber ring will be deformed, blocked in front of the speaker, resulting in a smaller sound, voice change, the solution is to remove it and re-glue it.
Interested friends can try it, in fact, many Nokia mobile phones are like this, draw inferences, and deal with the handset by the way when everyone clears the dust.
-
Earpiece problem, change the earpiece for 20-40 yuan, I repair the mobile phone.
-
The earpiece may be broken, and it costs about 30 yuan to replace it.
The sound of the Huawei Honor mobile phone is very quiet. You can check the amplifier part of your phone, dust your phone, clean it up, and switch between the current volume mode.
This is due to the sound being turned down or a hardware issue. >>>More
1——Appearance: I think they have their own good-looking, depending on the shape you like, we have no right to speak... >>>More
Setup issues.
You go into the settings, which one is at the bottom, (call it Zeng Qiang setting) anyway, it's the icon with headphones at the bottom. >>>More
7610 itself has 8m memory Because you install the ** to the German things with the phone memory so the memory is very tight This will seriously affect the speed of the mobile phone In addition to the ** mobile phone input method It is recommended that other software be installed to the memory card The way to restore is to enter the standby interface input * The phone will prompt you to enter the lock code The initial lock code is 12345 If you haven't changed it After entering the lock code, the grid will be carried out (But be sure to back up all your useful things before this operation.) Because all the information, business cards and things that are not on the body will be formatted after the grid is completed) The grid will be automatically turned on after completion, and then the memory will be sufficient again.