-
With 568A B, this small device is adaptive!
1) The WAN port of the router is connected to ADSLMODEM, 2) If there is a switch, connect the LAN port of one switch to the LAN port of the router, and the rest of the LAN ports are used to connect to the computer, including (the router's).
3) First enter the settings interface of the router, enable PPPoE, and auto-dial, set the password and user name in the WAN port, IP is automatically obtained, DNS, get from Telecom! The LAN port adopts the network segment, and then enables the DHCP service, 4) the computer directly connected to the router, the IP is automatically obtained, and the IP of the computer connected to the switch is set to, and the host number before 200 is automatically assigned to the router.
-
Install a router, enter the gateway, select PPPOE in the Internet settings, and fill in the account number and password in the settings. Connect the cable from the router to each computer, and then set each computer to a fixed IP, which can be used as follows: 2-255), subnet mask: , gateway: , dns: (Netcom).
Give it a try
-
Do you need to dial-up Internet access to the dormitory computer? Or what's that?
If it is an introduced network cable (that is, the network cable that comes out of the router), then a switch is required to enable two computers to access the Internet at the same time.
If you need to dial up to access the Internet, you need a router, or you can use software to realize that multiple computers can access the Internet at the same time (only one dial-up is required).
Note: The router can access the Internet at any time of the day, but the software must turn on the virtual server.
Yes. Give you a good network sharing software: anyrouter just use the version, but it's not good if it's high (personally).
If you don't register, you can use up to 5 computers at the same time.
-
When you buy a broadband router, there will generally be a manual inside, which you must be able to understand, which is very simple! Now a broadband router is about 85 yuan cheaper for 4 ports, and about 200 for 8 ports!
-
The cheapest plan:Hub plus Sygate Office Network Chinese version is OK。
-
?Just use a small switch.
-
What do you want to know? I don't understand what you mean!
-
How you connect to broadband in student dormitories can vary by region, school, and carrier, but in general, here are some common ways to connect:
Wired connection: There may be an interface within the dormitory that provides wired internet, and students can connect their computers or other devices to use the broadband network through a network cable deficit. It should be noted that before connecting, you need to confirm the type and usage method of the interface, such as whether you need to dial up, whether you need to provide a password, and so on.
Connect via WiFi: There may be routers or other devices that provide WiFi network inside the dormitory, and students can search for and connect to the WiFi network inside the dormitory on their own computers or other devices to use the broadband network. It should be noted that you need to get the name and password of the wifi before connecting.
Connect by other means: Some dorms may offer alternative ways to connect, such as using a mobile network data card or other type of network device. Before using these devices, you need to know how to use them and how much they cost.
It is important to note that before connecting to a broadband network, you need to be aware of the regulations and restrictions, such as usage time, data restrictions, prohibition of losing loads and uploading illegal content, etc., to avoid violating the regulations and incurring unnecessary fees. At the same time, you need to keep your device safe, such as installing antivirus software, setting a security password, etc., to protect your privacy and data security.
-
Yes, but if you want to do a little more, it depends on how many planes you have.
-
It can be, but it's quite troublesome, although it's on the card together, but it's easy to get it.
Let's talk about it, the small switch that we bought ourselves, the router, it's actually a hub, and if you want to get it, you need to have a router.
-
I've used it before, you want to buy a hub, your bedroom shouldn't be a ** interface, there is also a port, it's a broadband interface, you connect a network cable from that broadband interface to the hub, and then connect it from the hub to your computer, you can dial independently.
-
It's very simple, you buy a 4-hole router (dozens of dollars) for your friend to plug in the router, both of you can get on, and it is expensive to buy a hub.
-
Expenses for the first half of the year.
The three of them are evenly divided. The following fee is based on the period of June.
Half-year cost: 89 * 6 = 534, daily cost: 534 182 or 183 = three people to share:
Four-person sharing:
ADSL is a dial-up technology, broadband is a network connection technology, and fiber optics is a hardware network medium. >>>More
The host needs two network cards, after the host is connected to the Internet, one end of the twisted pair is connected to the host network card, and the other end is connected to the switch, and then a twisted pair is found, and the switch is connected to the computer.
The wan-port ping of the router fails.
The above is very contradictory, isn't it a big mistake? >>>More
Hello! Perfect Customer Service is honored to have the opportunity to ask your questions. Are IPs automatically obtained? >>>More
To confirm if you have GPRS enabled, then check that the ** server on your computer is after port number 80If you are dual-line, it is CMWAP CMNET, click on the Bluetooth dial-up network service on the TVT software, then your mobile phone will reflect, all you have to do is to click on the mobile phone all the way to allow. At this point, your computer will be ready to access the Internet. >>>More