How to turn on the game memory overclocking setting for Lenovo Legion Y7000? 30

The first step is to open Lenovo PC Manager.

After that, click to open the game mode, as shown in the image below:

Step 2: Then click on the red arrow to overclock the game, as shown in the image below

Step 3: Then click to enable the memory overclocking indicated by the red arrow, as shown in the figure below

Step 4 Finally, you can see that the memory overclocking is turned on, as shown in the figure below

Same as Y7000, I encountered the same problem, and it turned out that the overclocking frequency marked by the computer manager was not as good as the main frequency of my memory.

It is recommended to take a look from the "overview", your memory module is likely to be 2666 in the first place, and the "game overclocking" of PC Manager is overclocked from 2666 to 2666, which feels like a joke.

If you really want to overclock, you still need to go into the BIOS to modify it.

The memory clock speed in the overview.

The overclocking frequency is not as high as my memory clock.

BIOS inside open XMP other U overclocking or something, don't move, where overclocking is overclocked, the official has a reason to refuse the warranty, if you don't care about the warranty, you can overclock, XMP is automatic overclocking, you need to be able to change high-frequency memory, you can also manually overclock, you can not change the memory, overclocking is recommended to use Samsung, Kingston Hacker God or Corsair memory.

Dear users, if you have technical support and repair needs related to the Rescuer model, please call Lenovo Service **400-990-8888, the service time is from Monday to Sunday 9:00-18:00, thank you for your support.

The first step is to open Lianmao Ruxiang Computer Manager.

After that, click to open the game mode, as shown in the image below:

Step 2: Then click on the red arrow to overclock the game, as shown in the image below

Step 3: Then click to enable the memory overclocking indicated by the red arrow, as shown in the figure below

Step 4 Finally, you can see that the memory overclocking is turned on, as shown in the figure below

Press Fn+Q to toggle, the indicator is blue for silent mode. It won't hurt your computer。A white indicator is a balanced mode, and a red indicator is a beast mode, which is a high-performance mode, which can also be understood as a game mode.

It should be noted that Beast Mode can only be enabled when plugged in, and the power base limit of the CPU and graphics card is lifted in Beast Mode, unleashing performance and playing games freely.

Lianbo refers to the Savior Y7000 2020 in terms of configuration, using Core.

10th generation i5-10200H processor.

The i5-10200H has 4 cores and 8 threads, 14nm process Comet L AKE architecture, and the highest turbo frequency of a single core.

Cinebench R20 test, single-core score.

It is 469 points, and the multi-core run score is 2255 points.

The graphics card is optional GTX 1650, GTX 1650 Ti, and the CPU can also be selected as the i7-10750H.

The new version of Master Lu 85w+, it looks good. In terms of game performance, Beast mode, Shadow of the Tomb Raider

The performance test was able to run to 55 frames, "Odyssey.

It can reach an average of 63 frames, Far Cry 5

75 frames on average.

For most gamers, this configuration is more than enough.

Lenovo Legion Y7000Press FN+Q to switch, the red light is the high-performance mode, the high-performance mode is the game mode, and it will not hurt the computer.

If you want to buy a cost-effective computer, we recommend buying the Alienware X15 X17 from the Alienware series. I'm here to focus on the Alienware X17 I'm using. It's powered by an 11th Gen Intel Core i9K processor with a 5GHz turbo frequency and supports the latest NVIDIA GeForce RTX 3080 8GB GDDR6 laptop graphics cards, which is the highest spec of any gaming laptop currently available.

With a maximum power of 150 W and a graphics boost clock of up to GHz, the device is only 12mm at its thinnest point and 20 mm at its thickest point 9mm/21 .4mm, it's so cool that I don't have friends.

In addition, it is also equipped with smart 4 fans, achieving 5 major breakthroughs in heat dissipation technology, the reason is that it adopts the unique cryo-tech alien super cooling architecture, the heat dissipation effect is very significant, and it will not get hot after long-term use, I often use it to play games, the speed is good, just buy it.

First, you need to make sure that you have installed the memory module correctly and that your computer is running properly. If your computer is downclocked after using a co-channel memory module, you can try the following steps to modify the frequency:

After your computer is turned on, open the BIOS settings. It is usually possible to press a specific key (such as F2 or DEL) to enter the BIOS settings when the computer boots up. The exact keys may vary depending on the computer model.

In the BIOS settings, find and go to the "Advanced" tab.

In the "Advanced" tab, find the "Memory" option.

In the "Memory" option, you can see the information of your memory module. You can try changing the Memory Frequency setting to change how often the memory runs.

After changing the settings, save the changes and exit the BIOS. Your computer should restart and use the new memory frequency.

If you want to change the memory frequency in your Legion Y7000 computer, you can try the following steps:

Turn on your computer and enter the BIOS settings interface. When the computer starts, press the corresponding button (usually ESC, F2, F10, etc.) to enter the BIOS.

In the BIOS settings interface, find "Memory Settings" or "DRAM Settings". This option is usually located in menus such as Advanced, System Settings, or Hardware Settings.

In "Memory Settings" or "DRAM Settings", look for "Memory Frequency" or "DRAM Frequency" and select the frequency you want to set. Note that you need to set it according to the actual frequency of the memory module.

After changing the memory frequency, remember to save the settings and exit the BIOS. In most cases, you can use the "F10" key to protect the chain base set and exit.

Summary. 2. Enter the BIOS interface, select the Frequency Voltage Control option, and press the Enter key.

3. Select the DRAM configuration option and press the Enter key.

4. Select the Timing Mode option and press Enter.

5. Select the manual option in the pop-up dialog box and press the Enter key, and then the memory clock value or limit option can be selected.

6. Select Memory Clock Value or Limit and press the Enter key, select DDR 800 (that is, the option that needs to be changed to) and press the Enter key.

7. Press the ESC key to return to the previous menu until the main menu.

8. Select the penultimate item, press the Enter key, enter Y, and exit the BIOS. At this point, the memory frequency is changed back.

Note: It is not recommended to set the memory frequency beyond the calibrated frequency.

The Legion Y7000 memory overclocked itself off.

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately

Hello, I'm glad to answer for you, 1. Start the computer, enter the BIOS interface according to the prompts (as shown in the figure is the DEL key), and different models of computers can search by themselves. 2. Enter the BIOS interface, select the Frequency Voltage Control option, press Enter 3, select the DRAM configuration option, press Enter 4, select the Timing Mode option, press Enter 5, select the Manual option in the pop-up dialog box and press the Enter key, and then Memory Clock Value Or The limit option can be selected 6, select memory clock value or limit press the enter key, select ddr 800 (that is, the option that needs to be changed to) press the enter key 7, neutralize and press the esc key to return to the previous menu, until the main menu 8, select the penultimate item in the disadvantage section, press the enter key, enter y, and exit the bios. At this point, the memory frequency is changed back to Notes:

It is not recommended to set the memory frequency beyond the calibrated frequency.

The above reminded me to restart, but after I rebooted it turned off on its own, which is why.

Are you restarting your computer?

Yes, I restarted it according to the prompts above, and then opened this page, and I closed it again, and then opened it, and I restarted it again.

You click on the tool.

You turn off and then turn on the pro.

Network speed test. That's no problem with that.