-
Hello! If the vehicle is not in use for a long time, please turn on the anti-theft lock. When you reuse it, remove the anti-theft.
The specific operation is as follows: 1. Open the hood and turn off the ignition; 2. Take all the key fobs out of the car and close the doors; 3. Lock the car and press the remote control key to lock the car; 4. Break the negative electrode of the battery; 5. Close the hood. To restart the vehicle, do the following:
1. Open the car door with a mechanical key; 2. Open the hood and connect the negative electrode of the battery; 3. Unlock the vehicle; 4. Start the vehicle and do not turn off the engine within half an hour. Of course, you'll need to find a good parking spot, far away from the trash cans, and cover it with clothes to protect it from dust and rats. Finally, after restarting the vehicle, it is recommended to change the oil, do a maintenance (the oil has deteriorated and needs to be replaced), check whether the wiring has been damaged by mice, and check whether the battery has leaked electrolyte due to a long parking time!
Have a nice ride! Hope mine can help you!
-
Generally speaking, if the parking time is relatively long, it is recommended that you start the engine regularly to avoid battery power loss.
-
Hello! Long-term parking is not good for the car, the battery is easy to lose power, and the rubber parts are easy to fatigue, injury and aging! It is recommended to start regularly!
-
It is not recommended to park the car for a long time, and it is best not to drive it for more than seven days, which is not good for the engine, and the battery.
-
Hello, it is recommended that the battery cord be broken to prevent the vehicle from being fed, and it is recommended to maintain it and replace the oil when using.
-
Hello, if this vehicle is upright for a long time, it is recommended to remove the battery wire, so as not to lose power in the battery.
-
Hello, if the car is not driven for a long time, it is recommended to turn off the battery, otherwise it will lose power.
-
What you hear should be the sound of the exhaust pipe, which is the sound caused by the stress caused by the thermal expansion and contraction of the metal, which is normal.
-
The general operation is to brake, hang the P gear (pull the handbrake), turn off the ignition and leave. The most standardized operation is to brake, hang the N gear, pull the handbrake, hang the P gear, turn off the engine and leave.
Be careful when parking.
1. The car stops and hangs into N gear, and pulls up the handbrake or electronic handbrake.
2. Release the foot brake and use the handbrake or electronic handbrake to stop the car 3. Step on the brake and hang into the P gear.
4. Close the window, turn off the engine and unplug the key lock door.
This method is very standard, sometimes parking is not necessarily a flat road, the parking sequence is not right, it may cause the next time from the P gear hanging out a little tight, there will be a card sound. It's not good for the gearbox either.
-
Hello, when parking, you need to press the brake low first, and when the vehicle is completely stopped, put the gear into neutral, and then turn off the ignition, and then put the gear into the P gear, and then pull up the handbrake.
I hope it can help you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
When starting: you can first turn on the power (not the engine), step on the brake and pull to N gear, then ignition, and then hang into D gear and move forward directly.
When driving: keep the gear in D gear, and do not slide in N gear while driving.
Temporary parking: If the car is parked for more than half a minute, it will be put into N gear or D gear; If the parking time is short, then press on the brakes and so on.
When parking: After the car enters the parking position, press the brake to pull the gear lever to N gear, release the foot brake and turn off the ignition, and finally push the gear lever into P gear. Another way: after stopping, wipe the pillar brake directly to push the gear to P gear and then turn off.
-
Infinitely variable gears do not have to be in neutral or parking gear when waiting for a red light, and coasting in neutral for short distances is also allowed. The automatic transmission does not allow coasting in neutral, and parking must also be engaged in neutral [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Get in the car and fasten your seat belt, hang into D gear, press the breakh0LD switch behind the electronic handbrake switch, park the car automatically, step on the accelerator and go, it is very convenient [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
How to use the Honda Binzhi automatic parking car correctly? Honda Binzhi ( Check price |.)How to use automatic parking correctly? The automatic parking function is off by default and needs to be turned on manually.
Press the automatic parking button (brakehold), after the car is completely stopped, the instrument panel displays a green icon, indicating that the automatic parking starts to rush, and then the foot can release the brake. The following is more information about automatic parking: 1. Brief description:
This function is equivalent to stepping on the brake, and it can still provide parking braking power after lifting the brake, which is especially suitable for use when going up and down slopes and frequent start and stop. 2. Principle: The automatic parking function is given by the controller through the slope sensor, and at the time of starting, the parking control unit provides information through the clutch distance sensor, the clutch pinching speed sensor, the accelerator pedal sensor, etc. through calculation, and automatically releases the parking brake when the driving force is greater than the driving resistance, so that the car can start smoothly, especially suitable for the urban congestion road section of stop-and-go.
Generally, there is an autohold button next to the gear, you press it, it will prompt on, at this time you drive normally, when waiting for the traffic light, step on the brake until the car stops, you can release the brake, at this time the automatic parking will start, you don't need to step on the brake or hang to p, you can step on the accelerator directly when you want to go. @2019
-
Too thick Kai cover Pingyang Automobile Network] Binzhi automatic transmission start and stop the correct steps, first step on the brake, then ignite, then press the electronic parking brake, then hang D gear, hit the turn signal, release the brake, step on the accelerator, and finally go. The Binzhi is Guangqi Honda's first SUV model.
The wing-style front face design of Binzhi is based on mysterious and elegant black, and the grille and lamp body are integrated to highlight the vanguard and fierce personality; The combination of LED headlamps with curved LED daytime running lights combines elegance and sophistication. With the smooth body lines of the cabin and the spacious and agile tail design, Sun Zai has created a sense of power in the style of a colorful coupe. The unique design of the C-pillar directly cutting into the waistline harmoniously blends the agility of a coupe with the atmosphere of an SUV.
In terms of interior, the center console boldly adopts an avant-garde design with contrasting colors, which brings a strong visual impact to the driver and passengers. The unique floating two-color instrument panel and the simple and eye-catching embossed tacho needle create a sense of high quality and technology for the driver and passengers. The high-level armrest box full of personality charm not only reflects an unprecedented visual subversion in the shape, but also the efficient integrated multi-functional steering wheel and the center console with optimized layout not only make the driving information clear at a glance, but also bring humanization and a sense of safety to the driver.
Photo by Xu Shuanghe, Pacific Automobile Network).
Hello, the automatic transmission oil definitely needs to be replaced, generally three years or 60,000 kilometers can be replaced. After a long time, if it is not replaced, it is easy to cause damage to the gearbox.
Under normal maintenance, Volkswagen's manual transmission does not need to be overhauled for 500,000 kilometers, and the automatic transmission of the joint venture plant generally does not need to be overhauled for 150,000 kilometers (excluding PSA's AL4). >>>More
-500 km for the initial run-in, at this time the speed should not be too fast, generally below 70-80 km, the speed should not exceed 2200 rpm -1000 km for the mid-term run-in, the maximum speed can be appropriately increased, generally can reach 90-100 km, the speed is still below 2500 rpm as well. Proper acceleration will not only not affect the engine, but can promote the running-in, and you can see if there is any abnormality when the speed is re-accelerated -1500 kilometers is the later running-in, and the speed can be increased to less than 120 kilometers. Because running-in is a gradual process, it must be gradually increased. >>>More
Disconnect plug A T clutch pressure control solenoid valve A line short circuit or open circuit A bad VB SOL line circuit PGL and PG2 line circuit or grounding - T of the clutch pressure control solenoid valve failure of the first automobile automatic transmission in China.
The gear is not rotating, the torsion converter part at the front of the gearbox has been separated, the torsion shell is rotating, and the pressure plate with friction plates inside is pulled back and separated, and the power is not transmitted. >>>More