How to inspect medium sized buses for more than eight years

The annual vehicle inspection is commonly known as the "vehicle inspection". Before the car inspection, you must first prepare all the documents and complete the relevant procedures. Generally speaking, the annual inspection should be checked on time, otherwise it will easily cause great trouble.

Annual inspection procedures: 1. The vehicle unit or the owner shall fill in the "Motor Vehicle Annual Inspection Form" and send it to the designated place for annual inspection according to the date specified by the local vehicle administration. If the vehicle inspection is qualified, the vehicle management authority shall affix the seal of (**year** vehicle management office inspection qualified) on the driving license and the "motor vehicle annual inspection form";

2. For vehicles that cannot participate in the inspection on time after performing tasks in other places for a long time, the owner shall apply for the vehicle management office of origin and report to the local vehicle management office for inspection on behalf of the vehicle management office. After the inspection, notify the vehicle management office of origin of the inspection results;

3. Vehicles that cannot participate in the annual inspection on time due to special circumstances should apply to the local vehicle management office for an extension in advance.

Other provisions: 1. The unqualified vehicles of the annual inspection shall be repaired within a time limit, and if they are still unqualified within the time limit, the vehicle management office shall collect their license plates and shall not continue to drive;

2. Vehicles that do not participate in the annual inspection or fail to pass the annual inspection for no reason are not allowed to drive on the road or transfer to another country;

3. Vehicles that meet the scrapping conditions or use more than the specified number of years will not be inspected, and the license will be withdrawn, the file will be cancelled, and it will be scrapped.

Information required for annual inspection.

1. "Motor Vehicle Periodic Inspection Form";

2. "Factory Inspection Form for Technical Maintenance and Repair Before Annual Inspection of Motor Vehicles";

3. Unit plus opinion (bus), ID card or household registration book (private car);

4. Members of the association must be stamped by the association;

5. Road maintenance fee certificate, vehicle and vessel use tax certificate (valid);

6. Third party liability insurance certificate;

7. Vehicle purchase surcharge certificate;

8. Motor vehicle driving license.

Vehicle annual inspection process.

1. Fill in the form. You need to fill in the application form for motor vehicle license plate and two motor vehicle inspection record forms**, you need to use a carbon pen, a ballpoint pen is not good, and there is a reference sample at the filling form.

2. Find the annual inspection entry window, review the materials, and enter them.

3. Find the violation query window. In case of non-compliance, the fine will be paid here.

4. Find an inspector to carry out the external inspection of the vehicle, ask to open the front cover, check the frame number, and the inspector will give the signature page of the test, and then go to the inspection payment window (generally 100 yuan) to give the invoice.

5. Find the detection login window, and leave all materials in this window. It's time to drive to the testing workshop.

6. Queue up for testing, and someone directs the vehicle. After the test, give a test report.

7. Take the test report back to the business hall, hand it over to the No. 5 window to receive all the information (it has been bound together), and sign it as required.

8. Send the information to the No. 1 window, and hand over the driving license, and the clerk will issue the annual examination car sticker, and mark the new annual examination date on the reverse side of the copy of the driving license.

9. After the annual review, you can go home, don't forget to put the car sticker in the upper right corner of the front window.

Precautions. Regular annual inspections are a reasonable expense. Because, once the insurance is out of the insurance, the insurance company may refuse to pay for the overdue annual inspection. Vehicles should pay attention to traffic safety.

You can have an annual inspection, you can.

Relevant provisions of the Regulations for the Implementation of the Road Traffic Safety Law:

1) The passenger vehicle shall be inspected once a year within 5 years of operation; For more than 5 years, the inspection will be conducted once every 6 months.

2) Trucks and large and medium-sized non-operating passenger vehicles shall be inspected once a year within 10 years; If it is more than 10 years old, it will be inspected once every 6 months.

3) Small and micro non-operating passenger vehicles shall be inspected once every 2 years within 6 years; If it is more than 6 years, it will be inspected once a year; If it is more than 15 years old, it will be inspected once every 6 months.

4) The motorcycle shall be inspected once every 2 years within 4 years; For more than 4 years, it will be inspected once a year.

5) Tractors and other motor vehicles are inspected once a year. If the operating motor vehicle passes the safety technical inspection within the specified inspection period, the safety technical inspection shall not be repeated.

6) Vehicles that have exceeded the end of their life can no longer be transferred (sold), but can continue to be used; If you want to buy and sell, you can first go to the vehicle management office to handle the scrap order of the car (cancel the file of the car), and then buy and sell.

Handling materials. 1. Fill in the "Motor Vehicle Inspection Record Form", in addition to the owner's signature, the private car must also attach a copy of the owner's ID card, and the bus must attach a copy of the enterprise ** certificate and fill in the "Power of Attorney" and affix the official seal;

2. The rubbing paper of the vehicle identification number (frame number) is pasted on the corresponding position of the "Motor Vehicle Inspection Record Form";

3. Driving license (front and side pages);

4. Compulsory insurance policy for motor vehicle traffic accident liability (copy);

5. Self-repaired vehicles or vehicles repaired by repair shops need to be stamped on the inspection form (new car number.

1. The second time to participate in the annual inspection can be exempted).

6. Certificate of motor vehicle safety technical inspection;

7. For light gasoline vehicles, the exhaust gas test report using the steady-state working condition method shall be provided;

8. If the local issuance of the qualified mark is entrusted, the "Notice of Entrustment for the Issuance of Motor Vehicle Inspection Qualified Mark" and the receipt shall be provided;

9. Traffic safety violations and traffic accidents should be dealt with in advance;

10. If the vehicle seized by the court needs to be inspected regularly, it shall be handled with the certificate and voucher provided by the court;

11. If the person is required to submit the identity certificate and copy of the person and the written entrustment of the owner of the motor vehicle.

Hello, household non-commercial vehicles, that is, private cars, are exempt from inspection within 6 years after the purchase of the car. The vehicle does not need to go to the vehicle management office for inspection, but every 2 years, the owner needs to go to the traffic police brigade to get a sticker and knock a stamp on the driving license.

If the vehicle is more than 6 years old, the vehicle must go to the vehicle management office for inspection every 1 year.

If the car is more than 15 years old, you need to go to the vehicle management office for an inspection every six months.

The calculation of the categorical depreciation rate is generally based on historical data. The total amount of depreciation of various types of fixed assets accrued by the enterprise in the past few years is divided by the sum of the value of the fixed assets for which depreciation should be accrued.

The calculation of the depreciation of fixed assets by the construction enterprise should be carried out on a monthly basis, and when the average life depreciation method is adopted, the depreciation of the fixed assets increased and decreased in the month should be calculated according to the practical number of days. However, this calculation procedure is very complicated, and in fact it is difficult to do. In order to simplify the calculation procedures, depreciation can be calculated according to the value of fixed assets at the beginning of the month, fixed assets increased in the month, depreciation can not be mentioned in the current month, and depreciation should still be accrued in the current month for fixed assets that are discontinued in the month.

In this way, when the enterprise calculates the amount of depreciation that should be provided for each month, it can be based on the depreciation amount of the previous month, plus the depreciation amount of the fixed assets increased in the previous month, and the depreciation amount of the fixed assets reduced in the previous month can be calculated according to the value of the beginning of the month of various types of fixed assets.

The fixed assets for which depreciation is accrued every month include all fixed assets for production and operation and non-production and operation, fixed assets leased by financial leasing and operating lease. According to the stipulations of the current system, with the exception of houses and buildings, depreciation is not mentioned for fixed assets that are not used or not needed, fixed assets leased from operating leases, and fixed assets that have been fully depreciated and continue to be used, and fixed assets of bankrupt, closed, or suspended enterprises are not to be depreciated. However, the depreciation of fixed assets that are decommissioned or discontinued seasonally should still be provided.

2) Taiban depreciation method and mileage depreciation method (workload method).

Calculating depreciation based on the average life depreciation method is very suitable for fixed assets that are regularly used during the year. The advantage of this method is that in addition to being simple to calculate, depreciation is also drawn on an average basis according to the useful life of the fixed assets, so that the amount of depreciation withdrawn every month of each year is the same, so that the size of the depreciation cost borne by the unit project or product cost can be closely linked with the utilization of the fixed assets. The utilization rate of machinery and equipment is high, and the number of completed engineering products is more, and the depreciation cost of unit project or product cost allocation is less.

This is conducive to prompting enterprises to show concern about the utilization of fixed assets and to strengthen their economic accounting.

But to some mobility larger, not often use large-scale Shi Ding machinery, if also according to this method depreciation, then in the month that mechanical workbench shift is more, the depreciation cost of this month project cost bears less; On the contrary, in the month when the mechanical workbench shift is less, the depreciation expense of the project cost burden of the month is more, so that the burden of the project cost is very unreasonable. Therefore, it is necessary to adopt the "shift depreciation method" that is suitable for the use characteristics of these machinery, and the depreciation cost of these machinery will be directly included in the relevant project cost according to the work shift.

Let me tell you the most accurate method.

Look at the year and month of the inspection on the attached page of your driving license.

You can just go to the car review that month.

It is also possible to go 2 months in advance.

Small ordinary passenger cars belong to household non-operating vehicles, which are inspected every two years within 6 years, once every year after 6 years, and once every six months after 15 years.

According to Article 16 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, motor vehicles shall be inspected for safety and technical inspection within the following time limits from the date of registration:

1. The passenger vehicle shall be inspected once a year within 5 years; For more than 5 years, the inspection will be conducted once every 6 months.

2. Trucks and large and medium-sized non-operating passenger vehicles shall be inspected once a year within 10 years; If it is more than 10 years old, it will be inspected once every 6 months.

3. Small and micro non-operating passenger vehicles shall be inspected once every 2 years within 6 years; If it is more than 6 years, it will be inspected once a year; If it is more than 15 years old, it will be inspected once every 6 months.

4. The motorcycle will be inspected once every 2 years within 4 years; For more than 4 years, it will be inspected once a year.

5. Tractors and other motor vehicles are inspected once a year.

Operating motor vehicles shall pass within the prescribed inspection period.

If the safety technical inspection is qualified, the safety technical inspection will not be repeated.

Small and micro non-operating passenger vehicles shall be inspected once every 2 years within 6 years; If it is more than 6 years, it will be inspected once a year; If it is more than 15 years old, it will be inspected once every 6 months. Annual inspection process: 1

Drive your car to the door of the testing station and wait for the test (remove valuables from the car). 2.The car is handed over to the inspector to go online, and the owner waits to pick up the car.

3.At the end of the test, the staff will issue the test form, collect the receipt, and bind a copy of the insurance policy. 4.

Pay the testing fee. 5.Give the information (test form, copy of insurance, driving license and receipt) to the staff, and in 5 minutes you will receive the motor vehicle inspection mark and stamp the auxiliary license of the driving license.

6.Receive an eco-label. Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China".

Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China

Article 16. Motor vehicles shall be subject to safety and technical inspection within the following time limits from the date of registration:

1) The passenger vehicle shall be inspected once a year within 5 years of operation;

For more than 5 years, the inspection will be conducted once every 6 months.

2) Trucks and large and medium-sized non-operating passenger vehicles shall be inspected once a year within 10 years;

If it is more than 10 years old, it will be inspected once every 6 months.

3) Small and micro non-operating passenger vehicles shall be inspected once every 2 years within 6 years;

If it is more than 6 years, it will be inspected once a year;

If it is more than 15 years old, it will be inspected once every 6 months.

4) The motorcycle shall be inspected once every 2 years within 4 years;

For more than 4 years, it will be inspected once a year.

5) Tractors and other motor vehicles are inspected once a year.

If the operating motor vehicle passes the safety technical inspection within the specified inspection period, the safety technical inspection shall not be repeated.

The car is more than 8 years old and the inspection process is over.

The annual inspection process of motor vehicles is as follows: 1. Fill in the form. You need to fill in two copies of the "Application Form for Motor Vehicle License Plate" and the "Motor Vehicle Inspection Record Form".

2. Go to the annual inspection entry window, submit the relevant materials, find the violation inquiry window, and pay the fine here if there is a violation.

3. Find an inspector to conduct an external inspection of the vehicle, and ask to open the front cover of the car to check whether the frame number, warning triangle and fire extinguisher are complete, as well as whether the color and appearance of the body are consistent with the first on the driving license. The inspector gives the signature page of the test pass, and then pays the fee at the test payment window.

4. After paying the fee, the owner will hand over his ID card and vehicle driving license to the staff, and they will enter the annual inspection information of the vehicle in the system. After these are over, the owner can hold the ** and wait for the online test.

5. The on-line finch fiber inspection mainly checks the exhaust, brakes, lights, chassis and other contents of the vehicle, as long as the vehicle is not modified or malfunctioned, these tests can basically pass; When the owner drives the car to the door of the testing room and lines up, there will be inspectors to pick up the vehicle and **. At this time, the owner only needs to wait at the last photo booth.

6. If there is an unqualified project, the staff will notify the owner of the car, let the owner check out the account and carry out the maintenance by himself, and then come back to the annual inspection after the overhaul.

7. The annual inspection is basically completed, and the car sticker is pasted in the upper right corner of the front window. Now there are new regulations: 6-10 year car inspection once every two years, 10-15 years car inspection once a year, more than 15 years car inspection twice a year.