PS2 disk reading error, PS2 does not read disk reason

Under the analysis, it may be that the disc is worn, and the disc is generally used for a period of time.

Isn't it that the bald head should be clear!

Wipe your bald head with alcohol, it should be fine.

Mine is also 90006, and I have changed my assembly bald head for more than four years now, and I have eaten everything for more than four years, and I have never maintained it.

Don't you have any other pressure plate except the Weibao burning disk, try to see that you can read it, don't you know? There is a ticking sound on the reading disk, see if there is a scratch circle on the next disk? If there is a bald head, the protrusion of the line is glued with double-sided tape.

In addition, without installing a bald head, you can also enter the seven-star picture and memory card management when you boot up; And judging from your description of the situation, it should be that the bald head is burned (are you going to adjust the power of the cd and *** behind the bald head).

The so-called bald head burned (I burned three bald heads, and I burned them myself) The performance is to put the disc on, turn on the bald head, and the objective lens hits the disc to make a ticking sound, and the disc turns quickly after a few turns, and then turns half a circle a few times, the bald head is stopped, the laser light is extinguished, and then the bald head is changed.

If you understand, take the alcohol and wipe it yourself After wiping, then go to the store to change the optical drive After using PS2, pay attention to the dust and don't get into the machine There is a lot of dust, even if it is not broken, it will affect the speed of the disk reading

So many games read slow cg card should be bald head aging, buy a bald head online to replace it (will not disassemble the machine and look at it yourself,); The bald head model of the 90,000 machine is PVR-802, and the assembled more than 30 pieces buy this reading disk to see the character, and the so-called dismantling of the original bald head really does not feel the need to buy.

You can try it by adjusting the height of the bald head. How to regulate, you can check it on the Internet. If that doesn't work, I can't help.

First of all, check the age of your PS2 console, if you have used it for a long time, it may be the answer provided by the above players.

If it's a new machine, it may be that your host anti-burning chip is damaged. First of all, the landlord needs to understand that the PS2 we often buy must be changed.

Because the PS2 games we play now are all pirated (4 pieces, one D95 block). (If the new machine is not changed, you can only play the original game). Pirated discs have a certain impact on the damage to the host, so we often change the machine at the same time, the boss will ask you whether to install the anti-burning chip (mainly for heat dissipation) Another reason is that the connection line used to change the machine is broken or loose.

This kind of problem occurs, PS2 often gets stuck reading the disc. or a red screen (please insert a PS2 disc or something like that). The landlord only needs to go to the video game store and ask the boss to change it for you again, and weld all kinds of connecting wires firmly.

Hope to solve the problem of the landlord.

Finally, happy play!

1, depending on what model your PS2 is, the old PS2 is not very compatible with +R, it is recommended to change the card - R to try.

2. Choose disc copy instead of direct burning when burning.

3. Some plates are not compatible well, you try to buy one or two other brands to try.