About PS2 Disk Reading Issues! 20

Now that you've said that everything is fine except for the racing game, it's completely disc-disc-disc-centric. You look at your disc version number.,And then buy a different version of this racing game.,Version numberPut the disc into the *** optical drive and then enter the disc to view.,Don't tell me your game is a fire rage.。。。 All 4 of them are like this??

Do you have any friends around you who still have a PS2? If not, you take these 4 discs and try it at the game store. If it's okay in someone else's, it's that you're bald and have a problem reading racing this game.,It's weird.。。

In the case of racing, there's the GT4. Disc in D9 format... Let's try it on another machine with a disk.

That's all you can do with elimination.

If it's a racing game, the first thing you can be sure of is that these discs are D9 discs, which is another form of disc. The reason why playing other games is normal is because those boards are d5 boards. There are two explanations for your situation.

The first is the problem of the disk. The quality of pirated D9 disks is really hard to guarantee that you will be able to play the game smoothly. The second is the direct reading of your machine.

It's the direct reading chip that the boss added to you when you changed the phone when you bought the machine. There are also good and bad direct reading chips. If it is a poor quality direct reading, it will be difficult to read the D9 disk.

However, this is less the case. Basically it can be ruled out. Therefore, it is more likely that this situation is still a problem with the disk.

If other disks don't have this problem, it's basically not a bald head problem, it may be that the dish is not good, and the heat dissipation of the 7W small machine is not good, and if the processor is overheated, there will also be problems such as slow image output of the picture card.

PS2's ability to read the disk is not at all, and I sometimes do, but it's not as exaggerated as you, about 1-2 seconds.

It's normal that the disk can't be read, and many of the dozens of burning disks I bought can't be read after a few months, that is, they enter the seven-star screen (the picture where the seven light points are turning) or enter the memory card interface; Of course, sometimes it's a red screen.

You still have to try a few more to say, it's best to buy a few new pressure plates to try not to read the plate for a few reasons.

1. The problem of the disk itself (the disk will break itself after a long time, no matter how it is saved, it is useless; It is the most susceptible to breakage due to its engraved disc).

2. The bald head is aging and does not read the disk; What is the model of your own machine, search on the Internet, buy a bald head, and replace it with 3, direct reading problems; Often the red screen may be the direct reading is broken, and I will disassemble the machine to see the direct reading model and then buy one online and change it according to the welding diagram (this requires a certain amount of electronic knowledge and will use an electric soldering iron); I won't just go to js for a change.

I guess it's a problem with the disk.,After all, the life of pirated discs is relatively short.,You try to buy a new one to see if you can read it.,If you can, it's your disk problem.,Otherwise, it's your bald head that has a problem (it may also be that the direct reading chip is broken.,The probability is not large)

Mine is also 90006, and I have changed my assembly bald head for more than four years now, and I have eaten everything for more than four years, and I have never maintained it.

Don't you have any other pressure plate except the Weibao burning disk, try to see that you can read it, don't you know? There is a ticking sound on the reading disk, see if there is a scratch circle on the next disk? If there is a bald head, the protrusion of the line is glued with double-sided tape.

In addition, without installing a bald head, you can also enter the seven-star picture and memory card management when you boot up; And judging from your description of the situation, it should be that the bald head is burned (are you going to adjust the power of the cd and *** behind the bald head).

The so-called bald head burned (I burned three bald heads, and I burned them myself) The performance is to put the disc on, turn on the bald head, and the objective lens hits the disc to make a ticking sound, and the disc turns quickly after a few turns, and then turns half a circle a few times, the bald head is stopped, the laser light is extinguished, and then the bald head is changed.

If you understand, take the alcohol and wipe it yourself After wiping, then go to the store to change the optical drive After using PS2, pay attention to the dust and don't get into the machine There is a lot of dust, even if it is not broken, it will affect the speed of the disk reading

So many games read slow cg card should be bald head aging, buy a bald head online to replace it (will not disassemble the machine and look at it yourself,); The bald head model of the 90,000 machine is PVR-802, and the assembled more than 30 pieces buy this reading disk to see the character, and the so-called dismantling of the original bald head really does not feel the need to buy.

You can try it by adjusting the height of the bald head. How to regulate, you can check it on the Internet. If that doesn't work, I can't help.