How to operate the fillet in CAD correctly?

The rounded corners in CAD are mainly realized by the rounded corners command, and the process is as follows:

2. Select the toolbar rounded corners command.

3. Select one of the edges and press enter to confirm.

4. Enter the r key on the command line, enter the value of r as 50, and then press the enter key to confirm.

5. Then click another straight line, press enter key to confirm, and get the final effect as follows:

Note: Please turn off the Chinese input method before operation to avoid input errors.

To set the radius of a fillet.

Click Modify (M).

Fillet (f).

Input. r (radius).

Enter the radius of the fillet.

Select the object you want to fillet.

A step that fillets two straight segments.

Click Modify (M).

Fillet (f).

Select the first line.

Select the second line.

Steps to round corners without trimming.

Click Modify (M).

Fillet (f).

Enter if required.

t (trim). Input.

n (do not trim).

Select the object you want to fillet.

A step for the entire polyline fillet.

Click Modify (M).

Fillet (f).

Input. p (polyline).

Select the polyline.

To fillet multiple groups of objects.

Click Modify (M).

Fillet (f).

Input. m (multiple).

The main prompt will be displayed.

Select the first line, or enter an option and enter it at the prompt for that option. Select the first line.

Select the second line.

The main prompt will be displayed again.

Select the first line of the next fillet, or press.

Enter key.

esc key to end the command.

1. First open the CAD software, and then draw a rectangle in the CAD.

2. Next, press the shortcut key "F+SPACEBAR", and then the mouse will turn into a small square.

3. Next, press the shortcut key "R+Space (Radius Value)", and the words pointed by the red arrow will appear at the bottom of the page.

4. Then enter the value 100, press the enter key, and the mouse will turn into a small square again.

5. Next, use the left mouse button to click on the red arrow, which will turn into a dotted line.

6. Next, continue to click on the second line, and the first fillet will come out.

7. Then press the spacebar (repeat the above command), the mouse will turn into a small square again, select other lines respectively, and press this operation to turn the remaining two corners into rounded corners.

With the chamfer command, the shortcut key is f. Enter F, press the R key to set the radius of the fillet, and then click on the two lines that need to be fillet in turn. For example, if you have this diagram, you can enter f, press enter, press r, enter the radius of 10, press enter, and then click on the two straight lines in turn.

CAD commands are prompted accordingly after they are entered.

Fillet command: f Enter (space).

Enter r and enter the radius value After entering, click on the two adjacent edges, and the rectangle can also be selected. The chamfer radius cannot be greater than the length of the shortest side to be chamfered, otherwise it cannot be inverted.

Chamfered right-angle command: cha

You can draw with an arc, and the shortcut key is A

CAD drawings can be used to draw fillet by following these steps:

1. Run the CAD software first;

2. Select Modify in the menu toolbar and click to enter;

3. In the pop-up drop-down menu, select the rounded corner command and click to enter;

4. Enter the radius of the fillet according to the prompt in the command prompt bar below the interface;

5. Then follow the prompts to select the two edges that need to be rounded in turn.

Fillet command: f

If you want to enter a radius, remember to select r and enter a value.

Chamfer command: cha

If you want to enter a distance, remember to select d and enter a value.

1. Enter the chamfer command f first, and then select the object you want to round.

2. After selecting the object, enter the radius r, and then press the enter key to confirm.

3. After determining the radius r, enter the value of the radius of the corner.

4. After determining the radius value, select the two sides to be rounded.

5. Finally, press the spacebar to generate rounded corners.

The following steps are used to use the round command in CAD.

1. Create a new file in CAD software, draw a rectangle as an example, here you need to add rounds to the four corners of the rectangle.

2. Enter the shortcut "f" of the round command in the command bar to select the chamfer command, and press the spacebar.

3. Then enter R, press the spacebar, enter the radius value of the fillet 5, and then press the spacebar.

4. At this time, the first object is required, and one of the sides of the rectangle is selected.

5. Then prompt to select the second object, and select the edge adjacent to the first edge.

6. Then pour the second round, just press the spacebar once, and you can continue to enter the round command.

7. Then use the same method to complete the third and fourth rounds of the rectangle. Once you have set up the above settings, you can use the round command in CAD.

The rounded corners CAD drawing method is as follows:

Operating Equipment: Dell Inspiron 7400

Operating system: win10

Operating software: CAD software 2017

<>7. Then press the spacebar (repeat the above command), the mouse will turn into a small square, and select other straight lines respectively, according to this operation, the remaining two Zen hunger corners will also become rounded corners, as shown in the figure.

The usage is as follows:Operating Equipment: Dell Inspiron 7400

Operating system Bi Xiao: win10

Operating procedure: CAD 2018

1. Open CAD, find the rectangle option in the drawing, and then draw a rectangle in the drawing area, and one corner of the rectangle is a right angle.

2. Select the function option of the mouse stand-alone rounded sail in the modification.

3. Click the fillet us command and enter the r command on the command line.

4. After the r command, enter the desired angle on the command line.

5. After entering the rounded corners, press the Enter key to select the first object on the graph.

6. After selecting the first object, select the second object that needs to be chamfered.

7. After selecting two objects, you can see that the angle has been circled when the number of states is discussed.

Open the CAD software, select the round command, enter the radius value, and select the position where the round needs to be rounded.

Dell G3 Windows 10

Family Chinese version 20h2

autocad2014

1. Double-click with AutoCAD2014 to open CAD.

2. Select Classic Mode.

3. Select the line command or use the shortcut key in the drawing.

l and spaces. <>

4. Draw two intersecting straight lines and add spaces with the F shortcut key.

5. The radius of the right-click point of Qingxiao.

6. Then enter the radius size, such as 5 points to hit the carriage enter.

7. The left mouse button can select the two intersecting straight lines of the corresponding answer draft, and the following is to generate an arc with a radius of 5.

Here's how to use the CAD Fillet command:

If you want to draw a rounded corner in CAD, you can select the rounded corner command in the toolbar selected on the right side of the drawing area, or find [Xiusen Buried Correction] in the functional area above the software, and find [Rounded Corner] inside; In the command area, type :fillet and press enter to confirm, and you can enable the fillet command.

To draw how big the fillet is absorbed, the radius of the fillet can be adjusted by yourself. As shown in the figure below, after enabling the fillet command, enter :r in the command area and press the enter key to confirm, and then modify it to the radius you want to fillet, and then select the two sides to be filled, and the fillet is drawn.

CAD's command guide

1. Delete: In line with Windows operation, the del key is the most convenient.

2. Copying: It is to copy one or more objects to the specified location, or you can copy an object continuously, shortcut key co.

Click or enter CO, select a column, press enter or right-click, specify the base point, use CAD's snap function to click the center point of the column, right-click. Enter 1000 and press Enter. A column was copied successfully.

After selecting the object, click M as prompted to make multiple copies.

3. Move: shortcut key M, the operation is the same as "copy", and the copy function is different, copy is one more object, and moving only changes the position of the object.

4. Trim: shortcut key TR. Unwanted parts can be cut by a specified boundary.

Click the trim tool or enter tr, prompt Nachun did not select the object, select the boundary object, right-click, prompt to select the object, left-click to select the part that is not needed after cutting, right-click, OK.

5. Extension: shortcut key ex. Used to extend the extended object exactly to the target boundary. The operation is the same as cutting. The characteristic of these two commands is that they first select the target bounding object, and then select the modified object.

Here's how:Device: Huawei laptopSystem:

win10Software: CADVersion:

1. Enter the inverted noisy branch corner first.

command f, and then select the object you want to round.

2. After selecting the object, enter the radius r, and then press the enter key.

Are you sure. <>

3. After determining the radius r, the liter wheel is sensitive to the value of the radius of the fillet.

4. After determining the radius value, select the two sides to be rounded.

5. Finally, press the spacebar to generate rounded corners.

1. First open the CAD software, and then draw a rectangle in the CAD.

2. Next, press the shortcut key "F+SPACEBAR", and then the mouse will turn into a small square.

3. Next, press the shortcut key "R+Space (Radius Value)", and the words pointed by the red arrow will appear at the bottom of the page.

4. Then enter the value 100, press the enter key, and the mouse will turn into a small square again.

5. Next, use the left mouse button to click on the red arrow, and it will become a dotted line.

6. Next, continue to click on the second line, and the first fillet will come out.

7. Then press the spacebar under the sedan car (repeat the above command), the mouse will become a small square again, choose to select other straight lines, and press this operation to turn the remaining two corners into rounded corners.

How do you draw CAD rounded corners? This requirement can be achieved by chamfering.

Step 1: Open the CAD software and draw a rectangle first.

Step 2: Click "Rounded Corners" inside the modifier.

Step 3: Then type in the command "R" and press the "Enter" key when you are done typing.

Step 4: Enter the radius of the fillet (take "5" as an example), enter and press the "Enter" key.

Step 5: Then select "First Object" and then "Second Object" and the rounded corners will come out.

Summary: 1. Open the CAD software, draw a rectangle first, and click the "rounded corner" in the widening faction.

2. Then enter the command "R" and press the "Enter" key when the input is complete.

3. Enter the radius of the fillet (take "5" as an example), and press the "Enter" key after entering.

4. Han Dan then select "First Object", and then select Shen Laohe "Second Object".