How can I open the D drive, and how can I make the D drive show.??

Format the D drive to FAT32 and then use EasyRecovery Professional or FinalData software to recover the data,1 (choose the advanced option to customize the data recovery function);

2. Select the drive letter that has been changed to RAW format, and click Advanced Options in the lower corner;

3. In the file system scan, select "ntfs" for the file system", click Advanced Scan, select "Advanced Options" in the lower right corner, and set the cluster size and data start position to 0;

4. Click on the partition settings and use the MFT method (this must not be wrong); Then determined;

5. Click Next to start scanning the file system, and then wait, it will take a long time, be patient. After completion, you will find that an NTFS drive letter has been found, and then click on the found drive letter to start scanning;

6. After the scan is completed, you will find that all the files have been found, then click Recover, and select an available disk to store your recovered files;

7. Finally, format the disk with the problem, copy the recovered files back, OK, everything is intact.

I have encountered similar problems with USB flash drive before, and finally it was fixed, and most of the data is well preserved!

I don't think there's a need to reload. Find a repair software to repair the D drive. It's killing the poison. It shouldn't be a big deal, or else format the D disk!

No need to reload. It's killing the poison. Then find a repair software to repair the D drive. It shouldn't be a big deal, otherwise format the D drive

Generally, the computer disk is hidden, and now how to make the D drive or other drive letters appear is as follows:

Start - Run (win+r) Enter OK or Enter in the input box or right-click on My Computer - click and select "Manage", and select "Disk Management" in the "Computer Management" interface.

In the Disk Management interface, select the disk that is not displayed, and then right-click and select Change Drive.

number and path".

Select "Add" — Select the drive letter you are used to the right of "Assign the following drive letters" and click OK. The drive letter is displayed. Because the author's computer is displayed normally, the "Assign the following drive letter" option is grayed out.

Also, if you want to change the drive letter, pay attention to whether there is software that recognizes it in this drive, if it is just some files, you can change it. If the software recognizes this driver, it may cause the software to fail to open after the change.

Turn on the computer, and there will be a D drive as long as there are more than two partitions in the list of drive letters.

C disk. It is a system disk that stores system files. D, E, F and other disks are logical disks, which store various files or programs in a classified manner, which depends on personal preference. Such as D disk to install various applications.

and games. The e-disk stores work, study, and materials. The F disk stores movies, **, ** and other entertainment materials. It is completely personal preference. However, the C disk should not be moved as a system disk.

Go back to the desktop state of your laptop and find the start menu in the lower left corner. Left-click and a list will appear. Swipe the list, find the Windows system, and click the left mouse button.

You'll see a laptop icon, click on it as well. Once you open it, you can see the D drive.

Tools Raw Materials:

Lenovo Y7000P

windows10

Windows system.

1. Return to the desktop state of the notebook, and find the start menu in the lower left corner. Left-click and a list will appear.

2. Swipe the list, find the Windows system, and click the left mouse button.

3. At this time, you will see that there is a notebook liquid gauge computer icon, click it as well.

4. After opening, you can see the D drive.

Operating Equipment: Dell Computer.

Operating system: win10

1. Windows key + R to open and run Enter cmd and press enter to open the command prompt program, as shown in the following figure:

<>3. Enter: dir to list the folders that the D disk has, and the fierce wheel judgment is shown in the following branch change figure:

4. Enter the entry command: cd, after cd, enter the full name of the folder, as shown in the figure below

5. Press enter to enter a certain folder, as shown in the figure below

The specific steps for installation are as follows:

2. Then click on the "Settings" icon button in the new interface.

3. After that, click and select the "Change" button in the new interface.

4. Then click to select the "D drive" button in the new interface, and then click the "OK" button.

A D-drive is a partition in a computer's hard disk that is typically used to store operating system and other system files, as well as user data files. To open the D drive, you need to go to your computer's explorer or file explorer. It can be opened in several ways:

1.Right-click the "Start" button, select "File Explorer", and in the pop-up window, you can see all the hard drive partitions, including the D drive.

2.Open "This Computer" or "Computer" by shortcut Win+E, and you can see all hard disk partitions in the window, including the D drive.

3.Enter D: directly in Windows Explorer to open the corresponding folder of the D drive.

Once you have successfully opened the D drive, you can manage files and folders in it, such as creating folders, copying or moving files, opening or files, and so on. The D drive can be used as a backup area for files and data, or as a temporary storage area.

If you want to better manage the files and data on the D drive, you can use file compression and encryption software, such as WinZip and Winrar. These tools can improve data security by compressing and encrypting important data. At the same time, users can also repartition or format the D drive to optimize the performance of the hard drive.

It is important to note that before doing anything, it is important to back up all your important data to avoid unnecessary data loss. The data on the D drive may include system files that operate the system in a clean stream, so you should also carefully consider performing any operations on the D drive. <>

When we use the computer, we will inevitably encounter the situation that we can't open the D disk. The following is a list of how to solve the problem that the computer's D disk can't be opened, I hope it will help you!

The solutions and steps for the computer drive to not open are as follows

The most common reason why the first C, D, E, F disk cannot be opened is that your computer is poisoned, and it is more serious, your antivirus software has not been detected, at this time you can open the antivirus software to scan the computer full antivirus, and you can find that the virus is the best.

The second reason why the C drive can't be opened may be the problem of bad sectors of the disk, right-click to select the computer disk, click Properties, then select Tools, click Start Check, check through the check tool to solve the problem best.

The third reason why you can't open C, D, F, F computer disks is permission problems, if your user master is not an administrator, then you can't access these disks, you need to log in to the administrator, right-click on the disk, and in the properties user permissions.

The fourth reason why you can't open the system disk may be that there is a problem with the computer hardware, you can consider the problems of memory, hard disk, etc., you can discharge the power supply in the case, and then turn it on.

The first four are applicable to C, D, E, F computer disks can not be opened, if you just computer D disk can not be opened, or E disk can not be opened, then right-click to view the file type of the local disk properties, win7 is normally NTFS format, if not you have to format this disk, and then select the correct system file type.

There is also a situation where you double-click on the D drive or C drive, and the prompt says that the C drive is not formatted and needs to be formatted, then there is an error in the disk file, then you can use the quick format, and then use the data recovery software to recover the data inside.

The last scenario is due to the loss of some system files due to improper reinstallation of the system, the recovery method is to format the hard drive by repartitioning software and then install the new system according to the correct steps.