CAD trimming cannot be done all at once

Select All:

Select the object you want to trim, or hold down the Shift key to select the object you want to extend, or.

Select (f) Window Intersection (c) Projection (p) Edge (e) Delete (R) Discard (u)]:

2. Enter e and press Enter. Take a look at what the "edge" option means.

Enter the Hidden Edge Extension mode [Extend (e) Do Not Extend (n)] Do Not Stretch: The default option is "Do Not Stretch", and those who have the above problem must have this option set to "Extend". Extension means that the shape that is the clipping boundary will be wirelessly extended and trimmed to other shapes.

As you can clearly see from the figure in question 2, the center line on the right side has been trimmed after the centerline has been extended, so the above result has occurred. The screenshot in question 1 is incomplete due to the screenshot, but it must have been trimmed by the extension of a certain line.

The problem is as simple as that, but if you don't know, it will cause a lot of confusion. Therefore, it is recommended that when you are learning CAD, you should try each option of the command to understand the role of each option, so that you will not be at a loss when you encounter problems. If you encounter a problem, it's too late to study it, so take a look at the help and study each option of the command to come up with the answer yourself.

The above tips are applicable to AutoCAD and Haochen CAD and other similar software.

It can be trimmed in one go. Unless you have a joint in your straight line. It's just that there are contacts. The software intelligently selects the line of your choice for trimming.

tr Select all edges(e) and don't extend (n) and that's it.

Trim command - double space - e - n (do not extend).

As follows:

Tools Raw Materials:

Lenovo YangtianM4000E-06

windows10

1. Click the trim icon.

In the CAD toolbar, click the Trim tool icon.

2. Select Trim Boundary.

In the area, select the object as the trimmed boundary and press the spacebar.

3. Point the object to be trimmed.

Then click on the object to be trimmed.

4. Complete pruning.

Press Esc to exit and the graphic trimming operation is complete.

5. Skip the boundary.

In addition, in the Select Trim Boundary screen, press the spacebar to skip the selection boundary.

6. Point trimmed object.

Directly click on the object you want to trim to complete the trimming operation of the drawing.

Open CAD, right-click to open the window of the cropped drawing, and create a new rectangular boundary, then you can cut out a part of the image according to the rectangle.

Tools Raw materials: LenovoThinkVision, Windows10, AutoCAD2021

1. Click on the image option.

Open CAD, select the graphic you want to cut, and right-click on the image.

2. Click New Border.

Click Crop Options, and then click New Boundary.

<>3. Enter a shortcut.

Follow the prompt command to enter the shortcut, and enter the r rectangle.

4. Pruning**.

Trim a portion in the form of a rectangle.

1. First of all, we open the CAD software in the computer, and we draw two intersecting straight lines as an example.

2. Then we find the "Trim" command in the toolbar and click it.

3. After clicking, move the cursor to a blank space, and a prompt will appear as shown in the following figure, select the object.

<>5. After clicking, we move the cursor away from the straight line and right-click, which prompts us to select the object we want to trim.

6. We hold down the left mouse button and select the object we want to cut.

7. After selecting the target, release the left button and click, and the target will be removed.

The operation steps of graphic trimming in Haochen CAD:

After opening the drawing file in Haochen CAD software, enter the CAD trimming shortcut command in the command line: TR, press the enter key to confirm; Select the trimmed edge at the command-line prompt, that is, specify one or more objects to use as the trimmed edge (Note: To select a clipping edge that contains blocks, you can only use the Single Selection, Window Cut, Column Selection, and Select All options.)

Then select the object you want to cut, and the cut is complete.

CAD repair can only be used on the line segment with nodes, how to use it: first select the trim command in the modification toolbar - pick the point into a small square - then press enter to confirm - and finally click on the line segment in the picture that needs to be trimmed.

After clicking the "Trim" command, select all the positions to be trimmed, right-click OK (or press Enter), and then click the line to be trimmed.

Tips for the "Trim" command in CAD.

The shortcut key TR+Enter, select the target line on both sides of the line segment you want to cut, and then press Enter to click the line you want to cut!

How do I use the CAD trimming command? It's simple, let me teach you!

You can clip the point, the method is, you select the line you want to reduce, some points will appear on the line, you put the mouse on it, the color of the point will change, you can hold down the left mouse button and drag the point to reach the position you want.

Or select all ab, and then click build (or enter the command tr) and then click on the one you want to trim (this method is suitable for trimming multiple lines, convenient and fast, you select n lines, and then trim, click on the part you don't want to do).

Follow the command-line prompts and practice a few more times.