How to change the battery of Yitian integrated stove? The location of the Yitian gas stove battery

Yitian integrated stove so also battery, this should have a manual, you look at the manual OK, it's really not good, you can go to the after-sales after-sales after-sales service, or to the store to ask about the service, he can tell you I network to inquire, the store should have to sell wire, you go to the place where the integrated stove is sold and ask me how to change or check it on the Internet? If you look at the manual, you can also refer to other gas stoves, they are all similar, they should be good, and it is not a big problem?

The battery of the integrated stove is installed in the battery box at the bottom of the integrated stove, first move the stove of the integrated stove, and then you can see a bulge under the left side of the stove, and the bulge is the battery box of the integrated stove.

The battery compartment of Yitian integrated stove is tightened with screws, and you only need to loosen the screws, and you will see one or two batteries. When replacing, pay attention to the positive and negative poles, and install the new battery in place. Tighten the screws on it again, turn on the gas stove, and see if it can be ignited, indicating that the installation has been successful.

Use caution. 1. In the use of the stove, if it is found that the fire is out, immediately turn off the switch to open the doors and windows for ventilation, when there is no gas smell, find out the reason for the flameout, and open the doors and windows for ventilation, when there is no gas smell, find out the reason for the flameout, and properly deal with it before re-igniting.

2. Before stopping the use of gas or going to bed, check whether the gas appliance switches are all turned off. It is safer to turn off the main valve on the gas meter, open the kitchen window, and close the kitchen door to the bedroom.

Summary. 1. Find the location of the battery box at the bottom of the integrated stove.

2. Remove the fixing screws on the battery compartment and open the cover.

3. Take out the old battery in the battery box, and check the direction of the positive and negative electrodes in the battery box.

4. Install the new battery in the correct way.

5. Reinstall the fixing screws back.

1. Find the position of the battery box under the collection and infiltration of the simple stove. 2. Remove the fixing screws on the battery compartment and open the cover. 3. Take out the old battery in the battery box, and check the direction of the positive and negative electrodes in the battery box.

4. Install the new battery according to the correct placement of the pants. 5. Reinstall the fixing screws back.

It is a good integrated photo to use early and use it for a day, and it should be possible to grow up with a big problem, and it is one of the top ten brands, which is very good to choose.

The use of this emergency operation is very simple, it is a one-button button, which is very easy to use, and its attraction is also good, and the time for stir-frying is also very fast.

1. The gas valve must be cut off before cleaning and integrating the environmental protection stove, and the gas stove has been cooled. During the cleaning process, it is strictly forbidden to disassemble the safety device and airtight parts of the gas cooker to avoid damaging the security system and sealing system of the integrated cooker and affecting the use of the integrated cooker. 2. Clean the pot rack of the integrated stove:

Use a soft brush to remove dirt from the surface of the burner base, the ignition needle and the surface of the thermocouple protection needle. Avoid using granular cleaning agents (detergents), steel wool or knives to remove stubborn stains left on the burner, as this may damage the ignition needle and the thermocouple flameout protection needle, resulting in a failure of the safety device of the integrated eco-friendly stove or wear and tear on the surface of the components, which will directly affect the service life of the integrated stove. 3. Clean the surface of the integrated stove

Use soft gauze and soapy water (or a special detergent) to clean and maintain the countertop. Do not use granular cleaners or steel wool to clean countertops, as this can cause scratches on the stainless steel surface and affect the aesthetics of the cooktop. 4. Clean the smoke extraction channel

After a long period of use, a large amount of dirt will accumulate on the surface of the integrated stove, so it is necessary to clean the smoke duct every once in a while. To clean the smoke duct, use a suitable degreaser to clean it. Start the low speed of the range hood first, and then spray the degreaser to suck it into the fume channel, and the dirt will be broken down by the inhaled degreaser and flow into the oil tray.

5. Clean the fire hole of the burner fire cover: In the process of use, if you find that the flame is uneven or there is no flame in the individual fire hole, it must be the situation that the fire cover is blocked. In such a situation, it is necessary to dredge and clean the fire hole of the fire cover in time.

After the burner is cooled, remove the fire cover in time and use a steel needle to remove the dirt and carbon deposits in the fire hole. Do not rinse the fire lid directly with water (as blisters can temporarily block the fire hole) and do not wipe the burner surface with a hard object, as this will cause irreparable damage to the black surface enamel. 6. Clean the inside of the disinfection cabinet of the integrated stove

Wipe off the stagnant water on the tray and the dirt on the food rack in time, and maintain the disinfection cabinet regularly. 7. The waste oil in the oil accumulation box must be cleaned every 1-3 months to avoid overflow caused by overfilling of the waste oil.

Although compared with the traditional range hood, the cleaning advantages of the integrated stove are obvious, but some users still want to know more about how to clean the Yitian integrated stove, so let's take a look.

The emergence of integrated stoves has improved many problems existing in traditional smoke machines, such as: laundry often has a face-to-face request; Oil stains on the hood can drip onto the countertop; Difficult to flush the range hood, etc. As one of the favorite products of consumers on the market, the integrated stove has obvious advantages in flushing, but some users still want to introduce more knowledge about how to flush the integrated cooker in Yitian, so let's take a look at the magic tricks of the integrated cooker flushing.

How to flush Yitian integrated stove?

1. Before flushing the Yitian integrated stove, first block the gas valve and wait for the gas stove to cool. After using the integrated stove every day, rinse the stove cavity, panel, cover plate and body surface to prevent the safety device and airtight parts of the gas cooker from being removed, which will damage the security system and sealing system of Yitian integrated stove and affect its use.

2. When cleaning the surface of Yitian integrated stove, rinse it with hard gauze, and do not use granular cleaning agent or steel wool to clean the countertop, which will cause scratches on the surface of stainless steel and affect the appearance. In addition, use a neutral detergent during the rinsing process, and do not use an excessively acidic detergent.

3. When cleaning the pot rack of Yitian integrated stove, use a hard brush to remove the dirt on the surface of the burner base, the burning needle and the surface of the thermocouple protection needle. Preventing the use of granular rinsing agents (detergents), steel wool or knives to remove stubborn stains left on the burner can destroy the incendiary needle and thermocouple ignition protection needle, causing its safety device to malfunction or the surface of the components to be worn.

4. To clean the smoke extraction channel, it is necessary to use suitable degreasing agent to clean it. Start the low speed of the range hood first, and then spray the degreaser to make it suck into the fume channel, and the dirt will be broken down by the inhaled degreaser and flow to the oil tray.

5. Pay attention to the fire hole of the fire cover of the clean burner, after the burner in Erbor County is cooled, then take off the fire cover and use a steel needle to remove the dirt and carbon deposits in the fire hole. Do not rinse the fire lid directly with water (as blisters can temporarily block the fire hole), and do not rinse the burner surface with a hard object, as this will cause irreparable damage to the black surface enamel.

6. In the clean Yitian integrated stove disinfection cabinet, the stagnant water on the chassis and the dirt on the food rack must be washed in time, and the disinfection cabinet must be maintained regularly.

7. The waste oil in the oil collection box of Yitian integrated stove is usually cleaned up every 1-3 months, when cleaning, hold the oil collection box panel with your fingers, push it to the end, and then slowly let go, the oil collection box slowly pops out, and be careful that the oil box is overflowing due to overfilling.

Summary. Hello, how to change the battery of the integrated stove 1, the battery of the integrated stove is installed in the battery box at the bottom of the integrated stove. 2. The replacement method is very simple, first unplug the gas pipe of the integrated stove, and then move the stove up.

At this time, you can see a raised area under the left side of the stove, which is the battery compartment of the integrated stove. Simply unscrew the screws in the battery compartment with a screwdriver and you will see one or two batteries. Replace the battery with a new one, pay attention to whether the positive and negative poles are correct, and finally re-tighten the screws.

3. Turn on the gas stove to see if it can catch fire, if so, it means that it is installed in place.

Hello, how to change the battery of the integrated stove 1, the battery of the integrated stove is installed in the battery box at the bottom of the integrated Tongfeng stove. 2. The replacement method is very simple, first unplug the gas pipe of the integrated stove, and then move the stove up. At this time, you can see a raised area under the left side of the stove, which is the battery compartment of the integrated stove.

Just use a screwdriver to chain and unscrew the battery compartment, and you will see one or two batteries. Replace the battery with a new one, and then re-tighten the screws to see if the positive and negative poles are correct. 3. Turn on the gas stove to see if it can catch fire, if so, it means that it is installed in place.

Hello, you need to prepare a new No. 1 battery for the integrated stove to replace the battery, then find the location of the battery box under the integrated stove, then open the battery box cover and remove the old battery, install the new battery and cover the battery box cover.

Hello, if not, it is recommended to find a regular manufacturer to replace it to avoid other inconveniences caused by improper maintenance.