The drop of 502 on my shoe is very obvious, is there anything I can get rid of?

It is said that adding some more 502 will melt the original 502.

You can try it, drop a little bit first, and see if it can really melt away.

Good luck.

While 502 brings convenience, sometimes it will accidentally stick to things that you don't want to paste, and the ways to remove them are:

1. Use banana water to drop on the glue stain, and at the same time use the old toothbrush to continuously stir and brush, wait for the glue stain to become soft and take off, then rinse with water, brush repeatedly, and brush until it is clean.

Put an absorbent cloth on the back of the garment with glue marks, then apply some white vinegar to the glue marks, and finally scrub it clean with cotton dipped in water.

2. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly.

Glue is a kind of resin glue, as long as an organic solvent that dissolves the resin, such as acetone, is used.

However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

4. Stick 502 glue on a small area, as long as you soak it in hot water, if a large area is stained with 502 glue, coated with acetone, and wait for about 5 10 minutes to remove.

5. Acetone, gasoline, sesame oil, etc. are recommended, pour some insulating oil in the transformer on your hands, and the 502 glue will soon become soft and easy to rub off.

6. Closed heating can be used. (Try not to use this dangerous method).

7. If it unfortunately sticks to the **, you can use nail polish remover (water) or nail remover to quickly dissolve the glue on the **.

<> 502 that has solidified on the shoes can be washed off with soapy water, wind oil essence, makeup remover, and alcohol. 1. Soapy water: Pour some soapy water into the hot water, put the shoes in the hot water, and soak them for a while.

2. Wind oil essence: Wind oil essence is dropped in the place where the glue is sticked, and the glue will be dissolved for 10 minutes. 3. Nail polish remover:

Apply nail polish remover to the glue and wipe it a few times until the glue is dissolved.

Summary. Hello, I have found the following washing methods for you:

1. Hot towel: You can use a wet hot towel to stick 502 there. After ten minutes, the cured 502 will become soft and can be removed.

In addition, you can put a drop of 502 on the place where there is 502, and the cured 502 will also become soft, so it can be removed with a towel.

2. Degel depressant: There is a 502 degel decomer, which can be used to clean the dry 502 glue.

3. Wind oil essence: Use wind oil essence to drop on the dry 502 feet of water, and then gently rub it to wash off.

Depending on the tools you have, one or two methods that work for you will solve the problem.

How to wash off the 502 that is dry on the shoe.

Hello, I have found the following ways to wash off for you: 1. Hot towel: You can use a wet hot towel in the sticky 502 Nara Mengcha.

After ten minutes, the cured 502 will become soft, and the tomb can be removed. In addition, you can put another drop of 502 on the place where there is 502, and the 502 that has been solidified will also become soft, so that it can be removed with a towel. 2. Degumming agent:

There is a 502 degumming agent that can be used to clean dry 502 glue. 3. Wind oil essence: Use wind oil essence to drop on the dry 502 feet of water, and then gently rub it to wash off.

Depending on the tools you have, one or two methods that work for you will solve the problem.

Hello, did the answer help you with your manuscript? If there are any other questions, please consult me within 24 hours, if there is a help to you, please give me a like, thank you in advance

How to wash off the 502 glue on shoes:

1. If 502 is glued to the surface of the shoe, it will affect the appearance of the shoe, and nail polish remover can be used, which is useful, but the time is relatively long.

2. The 502 glue on the surface of the shoe can also be used with alcohol. Alcohol is also an organic solvent and has a certain solubility to 502 glue.

3. The 502 glue just stuck to the shoes is not completely glued to the shoes, at this time, it can be washed off by rinsing with a lot of water.

4. With gasoline. If it is more convenient to obtain gasoline, gasoline is undoubtedly the best choice. Gasoline is safer to use than other organic solvents because organic solvents are volatile and toxic, comparatively speaking, gasoline is a less toxic organic solvent.

5. Use 502 remover. The special 502 glue has the ingredient of acetone, which can soften the 502 glue, and can also soften other solid glue, and after the glue is softened, it can be scraped off with the corresponding tools. Moreover, the zipper is glued with 502 glue, which is also possible.

It's just that it can't be used for fabric, everything else can be used, and the effect is also very good.

Soak in warm water for 10-15 minutes and you're good to go.

Just use an electric drop iron to get rid of it.

Alcohol or nail polish remover is sufficient.