Hurry, hurry! Internet caf Internet access is very card, please point out, thank you very much!!

You use the packet capture software to catch the packet to see, I guess it is caused by the ARP virus, do you see if the light of the switch is flashing normally? I guess it's the congestion caused by the virus sending packets to one address. You drop the swap for 1 minute - 3 points.

Open again. See if there's any improvement. Dropped?

Nowadays, many Internet cafes have a headache about disconnection. But it will be on in a moment. I'm a business, too.

It took about 30 seconds or so to come up on its own, but it is not excluded that it is a network leader. Now for ADSL users, the only way to solve the network spearhead is to buy a router with it. But the Internet café has nothing to do with that.

Telecom's have also seen it. Want to know if yours is a big internet café? Is it with optical fiber?

And are you doing it on a two-line basis?

If you only open the host, will you still pay the card?

Is there any software installed on some computers in your Internet café, and the players install it themselves!

You can also use the network manager to check their data volume!

Is there too much stuff installed on the computer?

Data takes up a lot of hard drive space and also takes up memory, slowing down the system.

Or maybe there's a fault with your graphics card or memory module. This can also happen if the configuration doesn't meet the hardware requirements of the game.

If there is a problem with the network card, you need to replace the network card. Before judging the hardware problem, it is recommended to use the mobile phone to connect the router and use it as a hotspot, and the computer to connect the mobile phone to the hotspot.

31. First of all, whether the wifi standard of your computer is relatively old, and the router is the standard. This way, your phone will be faster, and your computer's Wi-Fi will not be as good as it gets.

2. Secondly, consider whether it is a driver problem and try to upgrade the driver. If it is still not good, the signal problem can be ruled out, and it should be a hardware problem. If there is no problem, it may be a problem with the computer receiving a poor signal. You can change the location of the router and the computer first, without obstruction.

Give me your email address and I'll send you a piece of software, it absolutely works.

Either move or endure.

You can play a game when you're very stuck,You**A software try to use Thunderbolt Browser** can also be,It will display**Speed Oh,2M max 256,4m max 512kb s。 Larger, in turn.

My computer --- properties--- Hardware--- Device Manager--- click on the network adapter, right-click on the following properties, Advanced, Mass Transfer Off, Close, OK, OK, OK....

What is the NIC model? How many m is the display speed?

You're in luck!

It's better to share movies on a local area network. 100 Gigabit LAN, the movie data of the host is transmitted to 10 extensions, even if it is carried out at the same time, each machine gets 1Mbps data, that is, 10Mbps data. The bitrate of the movie is less than 1000kbps, and it is not that 10 extensions can watch the movie stored by the host at the same time.

The 2nd floor is also wrong, do no disk? There is no disk to toss people, if there is a problem with the host, you will wait for 10 clients to not be able to access the Internet café!

My opinion is:

1. The charging server, movie server, and game server share a computer, and the other machine is also used as a client, so that there is more profit.

But you're worried that the server can't afford it? Don't worry, either do dual hard drives or do rain. If you only have a hard disk, it's fine, if it's not a diskless system and as a game virtual disk, the server can afford it.

2. The game is updated, use Flash. It's free, it's very easy to use. Easy to get started. You can install the restore through the host and unrestore the customer, so you don't have to run around. Support game penetration flash restore update.

3. Paid software, or use Vientiane. With Vientiane VOD, you can make a beautiful movie menu, which is 1000 times more beautiful than opening the interface of your online neighbor to view movie files.

As long as Microsoft doesn't look for you, it's fine.

It's either an electrical problem or a system problem.

Maybe it's been controlled by hackers! Be careful, it's best to check out the program! (Hee-hee.)

Either it's a problem with electricity, or a problem with the system, or it's controlled by a virus, please hurry up and kill the virus.

1. The mains voltage is unstable.

Generally, the switching power supply of home computers works in the voltage range of 170V 240V, and when the mains voltage is lower than 170V, the computer will automatically restart or shut down. Because we sometimes don't feel the fluctuation of the mains voltage, we mistakenly think that the computer will restart automatically for some reason.

Solution: For areas where the power supply is often unstable, we can purchase a UPS power supply or a wide switching power supply of 130 260V to ensure the stable operation of the computer.

2 Poor quality of the plug strip or power socket with poor contact.

Most of the power sockets on the market are of poor quality, and the internal contacts are manually soldered, and acid flux is often used, which can easily lead to the oxidation of the solder joints in the future use and cause circuit breaking or leakage between the live wire and the neutral wire. Because of manual welding, and because of the poor elasticity of the phosphorus brass sheet used, it will not take long to lose its elasticity, resulting in poor contact with the power plug of the host or display and produce a large contact resistance, and a large amount of heat will be generated during long-term work, resulting in virtual connection, which will be manifested as the host restarting or the display black screen flickering.

There is also a possibility that the wall socket used in our home, most of the wall sockets are not installed by professionals, so the wiring inside the socket is very non-standard, especially if these sockets often use high-power electric heaters, it is easy to cause internal heating and oxidation to form intermittent power failure, causing computer restart or monitor blinking.

Solution: Don't try to save money and buy cheap and high-quality power strips, buy some famous brand power strips, because their internal machines are automatically installed and crimped, and no manual welding is used.

For whether it is a problem of virtual connection inside the wall socket, we can change the host to a wall socket to try to see if there is the same automatic restart problem.