The mobile network can t connect to the wireless router 100

The network cable can be connected, it really has nothing to do with broadband, they only provide signals, and it is a matter of wireless routing to send the signal out wirelessly. Since you can't access the Internet wirelessly, of course, it's not set up well, as for the routing problem or the problem of your mobile phone settings, then you have to look at it specifically, you try to use other wireless Internet devices (other mobile phones or this book) to see if you can be wireless, if you can, adjust the mobile phone settings.

Switch to someone else's cat and connect to the wireless router to see if it's a setting problem or a problem with the router itself.

Don't be fooled by the sellers.

Set up the account password will not have the problem of Internet access The setting is also very simple, the general manual has set the Internet password and account number first, and then you have to set up the wireless routing connection security password can be wired on the router is no problem Internet access will not be a problem.

The situation is the same as in my home, and the wireless router can be used when you get someone else's home telecommunications network, but not at home, and now you have to use a wired router.

Listen to the grapevine, this is a special problem with mobile! The same router can be used with telecommunications, so there is no need to talk about it.

1.Check that the second light of the router is always on and flashing, this is the DNSL port, and the same as the optical transceiver, it is disconnected all the time, and the WAN port is not flashing, and it does not flash, indicating that there is no pulse data.

2.Enter the router system, set the IP of the computer to, subnet mask, go in to check, whether the dialing account and password in the basic settings are correct, and then check whether the port and default gateway meet the requirements, whether some attributes are prohibited, and finally do these to see if the DNSL message is none.

3.Check the circuit, the crystal head is tightened with a needle, the copper core is pressed against the pin, and there is an open circuit in the middle of the way.

4.Reinstall the operating system, the MAC address may be bound.

This is the way to check, if you are sure that it is really a router problem, then there is no way,

The first is to ask the comrades who sell routes to go to your home to set them up.

The second is that you set it up yourself.

If you want to set it up yourself, take a close look at your routing instructions.

When did something go wrong in your house? It's exactly the same as what happened to me. Depressed!

I'm also experiencing the same problem here, and I still can't dial up the Internet after changing routers. And I'm not the only one who has this problem.

Mobile phone wifi can access the Internet, but the reasons why the mobile network cannot be connected are as follows:

1. If the mobile network is not set correctly, it may be that the mobile network is not turned on or the mobile network is not set up correctly.

2. The mobile phone signal is not good, it may be that the mobile phone signal cannot receive the signal of the mobile network.

3. The SIM card of the mobile phone is damaged, which may be caused by the damage of the SIM card and the inability to connect to the mobile network normally.

4. The mobile phone system is faulty, which may be due to the failure of the mobile phone system to connect to the mobile network normally.

5. Mobile network failure, which may be caused by the failure of the mobile network to connect to the mobile network normally.

Features of the mobile network:

1. Voice communication function, the mobile phone will be able to provide mobile data service functions of various rates, such as MMS, LBS; Data and Internet surfing, online games, data more, mobile application solution function, provide communication interface with external equipment, support Bluetooth, WLAN and other wireless access methods.

2. With the improvement of chip computing speed and the increase of storage capacity, mobile phones can provide more powerful computing power, and real-time multi-compression transmission will no longer be a bottleneck.

3. The goal of mobile visual technology is to realize real-time transmission of video and audio under mobile network conditions. Wireless networks, on the other hand, have the characteristics of high bit error rate, narrow bandwidth, and large bandwidth jitter. The trembling branch <>

If you move the router at home, the network can't be connected, is there a problem? Hello dear, first, the router is faulty, the router runs for a long time, and sometimes it will fall into a state of endless loop, constantly obtaining IP, constantly connecting but just can't connect. Of course, a faulty router hardware or configuration problem can also cause other devices to not connect.

Second, multiple devices are connected to too many digital devices at the same time to connect to the wifi of the same router, the pressure on the router is very great, it is easy to cause conflicts, unable to connect, especially in the office. Third, the mobile phone wireless network card failure mobile phone to receive wifi signal is achieved by the mobile phone's wireless network card, after a period of use of the mobile phone, the wireless network card may be aging, resulting in poor wifi signal reception or can not connect to wifi. Fourth, there is a problem with the mobile phone systemAfter some Android phones are re-flashed, the mobile phone system is unstable, and it may also cause the mobile phone to be unable to connect to wifi.

In addition, the firmware of the router is not compatible with the phone, which may also cause the phone to not be able to connect to wifi normally. 【Solution】1. Restart the router and plug in the power interface of the router to restart the router, which can solve most problems caused by the router. In addition, there may be router configuration problems, which depends on whether the router itself can connect to the network, if it cannot connect to the network, the router must be reconfigured and restarted.

2. Upgrade the router firmwareIf the router firmware is incompatible with the mobile phone, you can upgrade the router firmware. You only need to log in to the Router Management Center and select "Software Upgrade" in "System Management" to automatically detect the new version. If a new version of the firmware is detected, click "Upgrade Now" to automatically update the firmware.

3. Restart the mobile phone wifi If the switch wifi still can't connect, you can open the phone settings, find the wifi you want to connect, choose to ignore this network, and then re-enter the password to connect to the wifi again. Fourth, replace the wireless network card, the mobile phone wireless network card aging or damage caused by the inability to connect to wifi, it is recommended to go to a professional maintenance organization to repair Qi Hengtan wireless network card, or replace the new wireless network card. It is best not to disassemble the phone by yourself to avoid other problems.

Hope it helps. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

If your router device is displayed when connected to China Mobile's broadband network"This router is restricted to China Mobile broadband network, please switch the network and try again"The error message may be due to the following reasons:

1.Device Usage Restrictions: Some router devices may have specific network operator restrictions and can only be used on certain networks. If you're using a router device with China Mobile broadband network restrictions, you won't be able to use it on other networks.

In this case, you can try the following workarounds:

1.Switch to an adapted network: Follow the error prompts and try switching to China Mobile's broadband network to use the router device.

2.Replace your router device: If you want to use your router device on a different network, you may need to replace it with a compatible device that supports a different network operator.

3.Contact the device vendor: If you are confused about the limitations of your router device, you can contact the device vendor or manufacturer to consult about the device usage limit for more support and solutions.

It is important to note that it is important to choose the right equipment and network. Before buying a router device, you can check with the vendor or manufacturer to make sure the device is compatible with the network you're using.

If the problem persists, it is recommended that you contact the device vendor or manufacturer directly for professional technical support and solutions.

Summary. Hello dear, happy to answer for you. It may be a problem with the device settings, you can use other devices to detect, or it is the reason for the line connection, you can check whether the connection from the home network cable to the modem to the wireless router is loose, or it may be the reason for the wireless router, this situation can generally be solved by restarting the router or resetting the router after factory resetting, or it may be broadband arrears, you can call ** to consult the operator's customer service to check whether there is arrears.

Hello dear. Hello dear, happy to answer for you. It may be a problem with the device settings, you can use other devices to detect, or the reason for the line connection, you can check whether the connection between the home network balance line and the modem to the wireless router is loose or not, or it may be the reason for the wireless router, this situation can generally be solved by restarting the router or resetting the router after factory settings, or it may be broadband arrears, you can call ** to consult the operator's customer service to check whether it is in arrears.

I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up

Hi Circular Penetration *Hello, the hardware connection of the router is normal, but it cannot access the mobile network normally, and there are many reasons for this, such as the failure of the cell switch you are in, the wrong matching of your business information, etc. If this situation occurs occasionally, it is normal, but if the orange ridge often appears in the acre, you can call 10086, and then transfer to the manual service, so that professional broadband maintenance personnel can provide you with technical services.