The power supply station was cut off, and the arrears were paid and refused to receive electricity,

You go up to complain, you see if there is anyone to deal with it. You are looking at the problem from your point of view, but from the point of view of the electricity supply bureau, this is the only way to force you to pay the electricity bill you owe. We also have such a thing here, there is a face in arrears of electricity bills and run, it doesn't matter, where to stop, as long as you don't go out of the province, to ensure that you have no electricity, otherwise, you will take a shot to change places, and you don't have to pay electricity bills for the rest of your life.

In addition, if you supply the electricity at home, if you connect the factory with a thread, right, you hurry up and hand over the money you owe to others, if you don't pay the electricity bill, the power supply bureau will not be able to complete the task, and their year will not be good, so you can do it.

You can tell them to separate the transformers and wires from the two of them... The cost of electricity for factories and households is different. Factory electricity is Yuan 1 degree, household electricity is Yuan 1 degree, plus it is not convenient, it is very troublesome if there is no electricity at home.

If they want to procrastinate, they will have to go to their higher department and ask them to help solve it. Don't be stupid and wait for them to get it for you at home. At the end of the day, you're the one who suffers.

You can do it yourself!!

It is recommended that you still pay the one-time electricity bill owed by the small factory, and at the end of the year, don't worry about the "electric tiger". It's really out of electricity.,That's a tragedy.。。。

Not to mention ordinary small and medium-sized private enterprises like you, even if the public procuratorate and law meet the "electric tiger", they are confused and can't be provoked. Monopoly state-owned enterprises.

It would be nice if the transformer in the factory was handed over. What do you owe it for? I guess there is something wrong with your personal reputation, otherwise the power company wouldn't have done this.

It means that you should pay the electricity bill quickly.

Go to the relevant departments to respond, why should you pay the electricity bill that you shouldn't pay? Right.

Nationally.

The form of electricity is still relatively good.

It is basically in the situation of sufficient power.

Like in your case.

It should belong to the situation of abnormal local electricity consumption.

It has nothing to do with whether the electricity ** is tight or not.

Call 95598 to reflect your situation.

The electric power service department is required to further improve the quality of electricity.

Wait for him to turn on, find his friends, and look for him wherever he can.

Let's see if there's something wrong with the other hardware.

This doesn't have to be a problem with the power supply.

It may be a memory card or something.

It may be that the graphics card or memory is not plugged in properly, or the motherboard is broken.

Not the power supply! I'm sure of it!

Not a graphics card (too unlikely).

Check your memory! It must be a memory problem.,I'm sorry.,If your memory swap doesn't work.,It's already hanging.

It's unlikely that the power supply will be broken, you can try it the way I did:

1.Unplug the memory, clean the gold finger (copper prong) of the memory with an eraser or alcohol, plug it back into the motherboard, and test.

2.Clear BIOS:

Power off, unplug the power cord from the back of the case, unplug the CMOS coin cell battery, and wait a few minutes before installing the battery back to the motherboard.

c.Boot test.

3.If you still can't turn on after completing the above steps, you can continue the test by following the steps below:

a.Only connect the CPU, motherboard, memory, power supply, graphics card, and monitor to test whether it is normal.

b.Remove the motherboard from the chassis and repeat the above steps to see if it is normal.

c.Use the replacement method to test whether the above parts are normal.

Finally, if all other parts are normal, it can basically be judged that it is a motherboard problem, and it needs to be sent for repair.

Another relatively rare phenomenon is that the reset button on the boot panel is short-circuited, and the cable connecting this button to the motherboard can be unplugged and tested.

l Connect the live wire n connect the zero line l out of the live wire connected to the lamp.

Isn't the explanation very detailed? But there is no zero line in the general wall switch! Only the line of fire!

The line that lights up the tester is connected to point L, the other one is connected to point N, and then the electrical appliance is connected between point L1 and point N.

The induction switch needs to be supplied independently, and it is not possible to connect it in series, the lights just share a zero line, and the live wire is the switch.

Very good to pick up, very clear on the drawings.

Find a battery of the same model to try it, the battery may be more broken. The biggest possibility is that the welding point of the electrode piece of the battery cell is disconnected.