How does Lanya connect to a mobile phone? How to connect the blue music speaker to the mobile phone

Bluetooth to connect to a mobile phone, you need to turn on the Bluetooth of the mobile phone and the Bluetooth of the device at the same time, and then search for nearby Bluetooth signals through the Bluetooth of the mobile phone. Then confirm that it is compliant, and after the Bluetooth name of the device, you can choose to connect. Once connected, it will work normally.

1. Open the Bluetooth page in your phone's settings.

2. Turn on the Bluetooth selection to be discovered, and make sure your receiving device is also turned on Bluetooth.

3. Select the device you want to send to pair.

4. Select "OK" on the receiving device

Turn on Bluetooth, then turn on the Bluetooth of the mobile phone, search, after searching, click to pair, you can connect normally after successful pairing, and it will be automatically connected when you open it in the future, and it will not be so troublesome.

The Bluetooth of the mobile phone is turned on at the same time, and the nearby Bluetooth signal is searched through the Bluetooth of the mobile phone. After confirming that the Bluetooth name of the device is compliant, select Connect. It can be used normally.

First of all, step 1: Turn on your phone's Bluetooth. Part 2: Pick up the small bluetooth headset you bought, press and hold the switch with your hand, press until the red light flashes, and release it, at this time, after turning on the bluetooth switch on the phone, you put that is so that others can search for our mobile phone, and the switch is also turned on. This is a thing that will come out of the phone at this time with a letter of the model number with BL.

Click on this and we'll be connected.

At such a young age, he has played very well in professional competitions, so it's not too much to call him a "genius boy". I've watched him play several times.

Turn on Bluetooth first, then take out Bluetooth, press a button at the bottom, and press it for a few seconds.

The bracelet is powered on and activated.

3.Bluetooth pairing request.

4.Pairing.

4. Click [Add New Device] on My Interface, select [Lexin Bracelet Watch], find your bracelet model, and click to enter.

For the time being, there is no relevant data, it is recommended that users experience it by themselves, and users can go to Meizu Technology for feedback if they encounter problems during the experience.

The steps for connecting a Samsung phone to a Bluetooth headset are as follows:

Tools: Samsung phone, Bluetooth headset.

Step 1: Slide the on/off key of the Bluetooth headset up (that is, turn on the Bluetooth headset switch) and turn on the visible mode of the Bluetooth headset (after long pressing and holding the answer button for about 3 5 seconds, the indicator light turns blue and lets go when it is always on, you can turn on the visible mode of the Bluetooth headset).

Step 2: Under the phone standby interface, tap "Menu" and then select "Settings".

Step 3: Swipe the switch button to the right to turn on the Bluetooth mode.

Step 4: Click "Bluetooth", and it will automatically enter the Bluetooth interface. Step 5: After entering the Bluetooth interface, the Bluetooth headset device will be automatically scanned.

Step 6: Click on the scanned Bluetooth device, which will be automatically connected (you can check the status after the Bluetooth headset has been successfully connected).

First press and hold the Bluetooth headset power button for about ten seconds, see the signal light flashing, turn on the Bluetooth of the mobile phone, search for nearby Bluetooth devices, and finally find the Bluetooth name of the Bluetooth headset, click to connect, and you can use it after the connection is successful.

2.Tap the name of the earphone you want to pair.

3.Tap OK in the Bluetooth pairing request.

If your phone cannot be connected to Bluetooth headphones, it is recommended that you:

Turn on the Bluetooth headset switch, it is recommended to check the Bluetooth headset manual.

If the problem persists according to the above methods, please bring the purchase invoice, repair card and machine to the Samsung Service Center for inspection.

Bluetooth headset pairing steps.

Many novices may be very distressed about the pairing operation of Bluetooth, some children's shoes have tried several Bluetooth headsets and still can't connect, the following is an introduction to the connection and pairing steps of Bluetooth headsets. It's easy to connect and pair.

2. Enter the Bluetooth interface of the mobile phone, select "Search Device", Dakang Bluetooth headset must be in the state of being searched (Dakang Bluetooth headset is powered off and press and hold the multi-function button for about 8 seconds), until the indicator light turns red and blue and flashes alternately to be searched, 3, Turn on the Bluetooth function of the Apple phone, and search for the device Dacom Music (Note: If other Bluetooth brands will display different names).

4. Click "Connect" and enter the password "0000" (some Bluetooth headsets do not need to enter the password).

At this point, congratulations on the successful connection, from now on, you can listen to songs and voices, it's very simple.

Turn on your phone's Bluetooth.

and headphones. Then you can search for it on your phone.

If the connection is not clear, you can take a look at the manual of the Bluetooth headset.

Bluetooth is turned on.

Hello! 1. First of all, a pairing relationship should be established between the mobile phone and the bracelet, by: turning on the Bluetooth function of the mobile phone and the bracelet, and setting the Bluetooth of the mobile phone to "visible to everyone"; 2. Search for Bluetooth devices in the mobile phone, select the pairing connection after finding it, and the password is:

0000, after the pairing is completed, the connection is OK. It is recommended to use Lexin Sports, and the evaluation of Lexin Sports is not very good

There are two ways to obtain the Terraria Mobile Small Blue Vial:

There are two ways to get it:

1.Obtained on metal shelves in the Dungeon.

2.After the mana limit is full (200), it can be purchased from the merchant.

PS1: The maximum number of magic stars is increased with magic stars (5 or 3 falling stars (I can't remember exactly) are crafted empty-handed).

PS2: The merchant will stay in an empty room once you have 50 credits.