Can the portable pneumatic baler use PET strapping?

PP strapping and PET strapping strapping straps are universal.

But it depends on the width of your pneumatic baler, generally the baler within 19mm can play the PET plastic steel belt within 19mm, if the strap is within 25mm, the baler also needs to be within 25mm, the largest is 32mm, and the price of the domestic 19 and 25 machines is the same.

Kebich suggests that you, for example, are using a 13mm or 15mm plastic steel strap, in this case, it is recommended that you take a 19mm style strapper, and there is an adjustment stop in the accessory to support 16mm, 19mm precise adjustment.

For example, if you are using 13 or 15mm plastic steel packing belt, you choose a 25 type baler, which can be used but because the width gap between 25 and the strap you use is too large, it is not easy to tie neatly when playing the belt, which affects the tensile force and appearance, and it is best to choose a baler, not the bigger the better.

KBQ-19 pneumatic hand-held baler daily use and maintenance matters:

2. Please do not operate the baler if there is no time to load the strap during use, whether it is tensioning or doing the buckle button, it is easy to damage the baler and the vulnerable key.

Finally, I hope you can choose a suitable pneumatic baler! Hope.

Yes, we just use Shuanghui packaging PET packing belt and pneumatic baler, that is, we should pay attention to the specifications to be used together, and the packaging effect is very good.

PET packing belt can be divided into hand and machine according to the packing method, the quality of the machine strap is not better than the hand belt***? The answer is yes, let's take you to understand the machine PET packing belt.

First of all, let's talk about the difference between the mechanical PET plastic steel packing belt and the hand PET plastic steel packing belt, the former has a paper core, and the latter does not have a paper core. The width tolerance of the machine PET packing belt is plus or minus, the thickness is plus or minus, and the verticality tolerance is less than 12mm, because the machine packing belt is to be used on the machine, in order to reduce the loss of the machine, its thickness, width, and straightness determine whether the strap can be used smoothly on the machine.

Therefore, when making machine PET plastic steel packing belt, the machine PET packing belt manufacturer uses pure new materials, so that the gloss, color and feel of the plastic steel packing belt produced by the wild are good, and the hand PET plastic steel packing belt does not have high requirements for the baler, and the material is not as good as the machine packing belt, which is mixed with different broken materials, and the breaking tension and gloss color also have a certain impact.

In the packing belt market, the mechanical PET plastic steel packing belt is about 1,000 yuan more expensive per ton than the hand PET plastic steel packing belt, and the quality of the machine packing belt is better than the hand packing belt in terms of breaking tension or color material, and the standard is higher.

Summary. 1. an air intake joint.

When your machine air intake joint is damaged or not installed, the air pump can not provide a complete air source, and the pneumatic baler will leak the fault, just replace the air intake joint or reinstall the part.

2. Sealing rubber ring.

The rubber ring is a small part, but once damaged or missing, there will be incomplete sealing, the phenomenon of machine leakage, and it can be replaced in time, so it is also very necessary to have several small rubber seals.

The above is about the causes of air leakage failure of pneumatic baler and related treatment methods, Nawei baler suggests that a good machine needs users to know how to cherish, correct operation, reduce the occurrence of failure rate, in order to better improve work efficiency.

What is the reason why the PET pneumatic baler can't be retracted, and the air leakage in the back?

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately

1. Air intake joint As a part connected with the air pump of the pneumatic baler, it is a necessary part of the machine in the process of use, when the air intake joint of your machine is damaged or not installed, the air pump can not provide a complete air source, and the air leakage failure of the gas baler will occur, just replace the air intake joint or reinstall the part. 2. Sealing rubber ring The sealing rubber ring is a small part, but once it is damaged or missing, there will be incomplete sealing, and the machine will leak air, and it can be replaced in time. The above is about the causes of air leakage failure of pneumatic balers and related treatment methods

A good machine requires users to know how to cherish and operate correctly to reduce the occurrence of failure rate, so as to better improve work efficiency.

Hello, if there is anything else you need to consult, you can describe it in detail

Hope the above helps you have a happy life! If you're happy with me, please give me a thumbs up

First of all: I don't know if you are asking about pneumatic or electric PET balers, both of which have the same principle (both rely on: vibrator + friction plate high-speed vibration to generate temperature to bond the packing belt).

If you can't do the buckle:

1. Check: whether the vibrator and friction plate are worn.

2. Remember to check the new machine - whether the button is reset to zero when doing the buckle time, if you press the button to do the buckle (there is action and sound, it is generally: vibrator, the friction plate is worn, and it needs to be replaced with a new one).

According to the principle, the Divine Call Core can be replaced, and the use of PET plastic packing belts must also be equipped with corresponding balers. If the chain is convenient for you, please inform your package size, how many packs are there now, and what is the tensile strength required for each one? Shanghai Yiqun Machinery ****.

Cai Jian'an.

First of all: I don't know what you're asking.

Pneumatic or electric PET baler, the principle of both is the same (both rely on: vibrator + friction plate high-speed vibration to generate temperature to bond the packing belt).

If you can't do it with potato buckles:

1. Check: whether the vibrator and friction plate are worn.

2. Remember to check the new machine - whether the button is reset to zero, if you press the button (there is action and sound, it is generally: vibrator, Moji sells the wipe sheet is worn out, and it needs to be replaced with a new one).

Plastic packing belt is a kind of uniaxial orientation of plastic strapping material, its thickness is 12-22mm, with the advantages of light weight, firmness, corrosion resistance and easy use, etc., it is widely used.

The PET packing belt is a kind of polyester packing belt with PET as the main raw material through extrusion unidirectional stretching, and it is currently the most popular new environmentally friendly packaging material to replace steel belt, steel wire and heavy-duty PP packing belt.

With the advantages of low cost, money saving, environmental protection and beauty, easy to use and durable, high strength and high tensile strength, PET plastic steel packing belt has become a new type of strapping and packaging material to replace steel belt and PP packing belt, and has become the development trend of industrial product packaging at present and in the future.

Since 2000, the production technology of plastic steel belt was introduced into China, the domestic demand for PET plastic steel packing belt has grown at a rate of 500 per year, and the large-scale application of wood, papermaking, stone, ceramics, cotton and other industries, along with the complete specifications of plastic steel belt, as well as the maturity of supporting packaging equipment, PET plastic steel packing belt began to be used in the glass industry in 2004 to pack various glass products. As a fragile and heavy product, glass has very strict requirements in terms of outer packaging, which must be solid and firm, and require sufficient cushioning to protect the glass, and also withstand the test of transportation. To this end, the state has formulated the standards of "Ordinary Flat Glass" (GB4871-1995) and "Float Glass" (GB11614-89), which clearly stipulate the packaging form and method of glass and provide reference for the outer packaging of glass.

As a PET packing belt manufacturer for more than 20 years, Shuanghui Packaging has customers in all walks of life, heavy carton packaging, stone, brick, glass, steel, aluminum ingots and other industries.