How to see the quality of the PS2 disk, how to place the PS2 reading disk is good

You're good at asking questions.

The quality of the carved disc belongs to the middle and upper, which can ensure the normal game.

Distinguishing the quality of pirated disks mainly depends on experience, and the most direct way is to recognize the disk number. The worst disc number I have personally encountered is SD,PT,These two numbers are basically not readable,In addition, the quality of some VV,VTV numbers are also very average,After a period of time, it is also impossible to read the disk。

The quality of pirated disk numbers are jm, de, etc., and there is generally no problem.

To identify by number, you first have to contact the pirated disk for a certain amount of time and summarize the experience yourself.

In addition, look at the light to see the light transmission of the pirated disk, if you can see the round holes of different sizes, it means that the data surface of the disk is damaged, and this kind of disk is generally relatively rotten. There are also scratches on the surface of the disk, and the storage time of the pirated disk, which has a certain impact on the quality.

To put it simply. 1.Buy new properties, don't buy old ones that have been stored for a long time.

2.Distinguish the tray number according to your own experience, and when there are multiple numbers for a disc, the best tray number is used as the standard.

3.Observe the surface of the plate and the light transmission.

4.If you think the game is important, buy several disks with different disc numbers to spare.

Same upstairs. There are also batches of pirated discs.

Some games may come out in batches of poor quality, such as getting stuck in the same place and crashing.

So generally speaking, changing a batch will solve this situation.

Of course, this is theoretical, but in practice you have to look at the mood of JS.

The pirated disks on the market, one region after another, are the same between regionsIf you want to be better, you can ask js to help you burn the game, and burn the disc to use it better, but the money is a little more expensive.

It depends on the model of your machine and the model of the direct reading chip

The following is only a list of 7W series reading methods for reference.

PS2-7W series to read PS2 game disc operation steps:

Power on: After plugging in the power supply, open the cover, card the game disk, cover it, and press the reset button once.

Disk change: When the game is not loading or saving, open the cover, the time wheel will automatically stop, change the disk, close the cover, and press the reset button once.

Power off: Press and hold the reset button for two seconds, the reset button will turn red, then the head will automatically reset, the machine is in standby mode, and then unplug the power behind it.

PS2-7W Series Read*** Video Disc Operation Method:

Different direct-reading chips correspond to different operation methods, basically the following two.

1、Put the disk in,Press and hold the reset button and don't put the red light (standby state),Let go,Press and hold the reset button again,Wait for the TV to appear full of stars and then let go。

2. When the device is turned on (the reset button is green), put the disk in, close the lid, and then press the reset button twice (double click).

PS2-7W series read PS1 game disc operation method:

Bluechip Direct Reading:

Put the disk in standby mode, press and hold the reset button for two seconds.

Direct reading: In the boot state, put the disk and double-click the reset button.

NH10 Direct Reading:

Put the disk in standby mode, hold down the reset button for a second, let go, and press the reset button again.

Long press the power light to yellow to start, but it's a lot of *** can't see, especially the compression of the d9 disc, the d5 disc to see if the area code is suitable for the suitability, it is not recommended to put ***, it hurts the bald head!

It's better not to buy the kind of disc that is a d9, the sound is problematic. D5's is ok. Look at the movie or something, don't put the compression disk in PS2 to watch.

Watching fakes*** and playing PS1 games is the same as his method. Look at the genuine *** press the power button, just like playing a PS2 game.

Even I've been using *** to watch movies.,PS2It's been used for 3 years.,It seems that the reading disc is still super smooth.。

[s:76]

s:76]s:76]

I haven't experimented.,But even if you can watch it, it's still recommended not to use ps2 to watch it.,I never even play ps2 games.。

If you look at the genuine *** of a more than 100 yuan

That's okay, 6 yuan a piece, forget it.

However, it is not recommended to use ps2 to watch*** It is very damaging to the bald head.

It doesn't matter if the machine is thick, it is best to erect it if it is thin, because it is easy to absorb ash when placed horizontally, and due to structural problems, the bald head of the thin machine will sink when placed horizontally for a long time.

Horizontal and vertical placement has no effect on the reading plate, but the ventilation is good.

Yes. If you want to buy a PS2 disk, go and take a look. Just search for PS2 discs.

After searching for it, I went to the store and asked the owner to see if there was any engraving. There are two types of PS2 discs in the store, one is a pressing disc and the other is an engraved disc. The quality of the pressure plate is not good, and there is often a phenomenon that cannot be read.

The quality of the engraved disc is relatively good (but it is certainly not as good as the genuine disc), but it does not look very good...If you have the conditions, you can still engrave the game file yourself.,That's very affordable.。

**, I also have a lot of old PS2 game discs.

PS2 game discs are specially encrypted, and you can't see the relevant files when you extract the image or open the disc directly. To extract the contents, you need to use some cracking tools. You can go to the a9vg or emuzone forums to ask the gods.

In other words, the images of home console games are specially encrypted, and the contents of the disc and image cannot be seen without relevant tools.

It's very simple,The first question is to play the ruler stockings,**Address,If you have 360, you can go down in the software housekeeper,Compress the burning software,The installation path is in English,But it's easy to understand,You see it yourself。 You can also go to the Dotsoft website. The second question,First of all**ps2iso format image file,It may be MDF format,But you can engrave,Remember to use ***r,Put it into the optical drive,Yours is a computer with burning function, right?

After opening the alcohol,There is a disc image burning or burning wizard on the left side of the menu,Click that,Select the path of your image file,Click Next,Select the lowest hall for writing speed,Select playstation2 for the data type, don't adjust anything else,Click to start,Then wait for the burning to be completed。 There are also optional image files in MDS format. Let's ask if you have something.

Hope it helps.

The picture of the Japanese version is softer.,The game menu is definitely Japanese The o of the general handle is OK.,X is the return.。

The European version of the American version of the picture style is heavier,The same game is more rendered than the Japanese version,The x of the general handle is OK,O is the return。

Happy gaming.

The game board is also divided into a Japanese version and an American version? The game is right... Then you can only know when you enter the game, and you can basically know what version it is by looking at what language the menu is.

However, except for a slight difference in language and operation, it is basically the same, and it is possible that some new elements will be added in the later version, but this is rare.

Only the thick plate has this function, and then you need to buy a new PS2 network card adapter to connect to the hard disk and read data from the hard disk.

You can use the sedan town OPL software to store the U disk, and then use the ELT tool of the back to the field PS to run it to close the coarse use, see the detailed operation.

PS2 Disc does not require any special settings. You can choose to burn the image with Nero. But don't burn faster than 8x, preferably 4x.

If you have a win7 system, you don't need any burning software at all. Double-click the ISO file to burn it to a disc. (Remember that if you don't burn PS1 games to CD, but burn PS2***, it's best not to use any settings) The most important thing is to choose a good platter, preferably more than 3 yuan a piece.

Burn ISO and CDI files directly, mirror burning, not copying ISO

1:1 Tick Slow at low speed.