How to set up the win10 computer to access the Internet after connecting to the network cable

1. Right-click the network icon on the desktop of win10 system and select "Properties", as shown in the figure below.

2. In the Network and Sharing Center window, click "Set up a new connection or network" as shown in the image below.

3. Select "Connect to Internet" in the Settings Network or Network dialog box, and then click Next, as shown in the figure below.

4. Click Set up a new connection in the Connect to Internet window, as shown in the figure below.

5. Then select "Broadband PPPoE", as shown in the following figure.

6. Finally enter the ISP information provided by the Internet service provider, both and the password. Then click "Connect" as shown in the image below.

7. After clicking on the link, the system prompts that your Internet connection is being created, wait a while, and the broadband connection will be set.

Once connected, the Network & Sharing Center will display the wired network you just set up.

8. After the broadband connection is successfully created, you can see the broadband connection icon we just created in the network connection, right-click on the broadband connection, and select "Create shortcut" to facilitate us to quickly connect to the Internet in the future. This is shown in the figure below.

The steps to set up a broadband connection on a win10 desktop computer are as follows:

Preparation materials: Windows 10 operating system, computer.

1. Click on the desktop.

Windows icon in the bottom left corner, click Settings.

2. After entering the settings window, select Network & Internet.

3. Click "Dial" and select "Set New Connection" in the right option bar.

4. Select a connection option, such as "Connect to Internet", and click "Next".

5. Click "Broadband (PPPoE)(R)" and click Next.

6. Enter the broadband and password, and click "Remember this password". Then click Connect at the bottom right.

7. You are connected to the Internet.

The win10 desktop computer is set up with a broadband connection.

The specific operation steps for setting up a wired connection in Windows 10 are as follows:

1. First of all, we turn on the computer, open the settings, and select [Network and Internet].

2. Select [Dialing] on the left menu bar.

3. Select the broadband connection on the right.

<>5, and then select Set New Link.

<>7. At this time, you will be asked how you want to connect, and we will choose Broadband (PPPoE) (R).

8. Then enter your username and password, and click [Connect].

8. Then we can connect to the broadband connection that has been set up.

How do you set up the network cable, then you connect to a well, if there is a router, he will be connected to the network, and he will be the first number of my password, and it will rain when I go out.

This network can be set up by clicking on it, and then after connecting the network cable to it, you can set it up directly in it.

1. Create a network link, enter the win7 start menu in the lower left corner of the desktop, and click "Control Panel".

2. Click on "Network & Internet."

3. Next, open the "Network and Sharing Center", here is the function that must be used for win7 computer networking, whether it is connected to a wireless network or a broadband network, you need to open this function to set up. There are also shortcut keys here, which can be opened by clicking on the window-like shortcut key in the lower right corner of the desktop.

4. Click "Set up a new connection or network".

5. Select "Connect to the Internet."

6. Win7 will automatically search for the corresponding wireless network, click on the network with the best signal "connection" and enter the password, if the wifi does not set the password. You can access the Internet by connecting directly.

After opening the Change Adapter option, right-click the network name and select the connection, the specific operation steps are as follows:

PC model: MSI GF63 Thin 9SC System version: Microsoft Windows 101, the first time you need to connect to the network after reinstalling the system, you need to do it manually, enter the start menu and click Settings.

2. Click on Network & Internet Options and open the Change Adapter option under Advanced Network Settings.

3. Find your network name in the pop-up window, right-click the icon, and select Connect.

Here's how

1. First open the start menu in the lower left corner of your computer and click to open the "Control Panel" option.

2. Then click on the "View Network Status and Tasks" option in the new pop-up page.

3. After that, click on the "Change Adapter Settings" option on the left side of the page that pops up.

4. Then in the new pop-up page, right-click the network you want to connect to and click to select the "Disconnect" option.

5. Finally, click on the "Connect" option on this page.

Computer maintenance. 1. Do not force the lid of the LCD screen or place any foreign objects between the keyboard and the display screen to avoid damage to the internal components caused by heavy pressure on the upper glass.

2. When the computer is not used for a long time, the function keys on the keyboard can be used to temporarily turn off the power of the LCD screen, which can not only save power but also prolong the life of the screen.

3. Do not touch the surface of the screen with fingernails and sharp objects (hard objects) to avoid scratches.

4. The surface of the LCD screen will absorb dust due to static electricity, it is recommended to buy a special wiping cloth for the LCD screen to clean your screen, do not pat it with your fingers to avoid leaving fingerprints, and please wipe it gently.

5. Do not use chemical cleaners to wipe the screen.

The computer needs to be set up for the first time when plugged into the network cable1. Find the computer network cable interface, align the computer network cable with the interface and gently press to connect the network cable to the computer.

2. Find the network on the computer, right-click the properties, and open the network management center.

3. Click Set up a new connection or network.

Meaning:

If it is a 98 and me system, please go to the control panel network connection to set it up. Prompted to enter the username and password, the default username and password are admin, which is also written in the router manual. After entering, press enter to enter the router configuration interface.

Select the setup wizard, then set the network parameters at the point, the WAN port settings, and everything is set up in the router here, click the system tool, restart the router, and it will be good in a few seconds.

1.The laptop has wireless Internet access and Internet access on a network cable.

2.The former requires the wireless router to be dismantled, while the latter can directly connect the Hongyu cable to the computer and dial in the computer port.

3.Enter your wireless router password... Then click Connect.

The router network settings are as follows:

1. Enter in the win10 browser: (You can also open the settings page through or hit the bank, and then set a "login password" for the router according to the prompts on the page.)

2. Set the Internet access parameters, and the routers on the market have the function of automatically detecting the Internet access mode. You only need to wait for a few seconds, and according to the test result, you can set the Internet access parameters.

<>5. If the router detects that the "Internet mode" is: fixed IP address - you need to fill in the following: IP address, subnet mask, silent touch pants recognition gateway, preferred DNS, and alternate DNS information.

6. After completing the Internet parameter setting of the router, you should set the wireless name and wireless password of the router, as shown in the figure below.

7. After setting the wireless name and wireless password of the router, there is no place for the router to be set. According to the prompts on the page, complete the settings of the router.

Setting up a wired connection in Windows 10 is very simple. Follow these steps:

Make sure your computer is connected to a wired network.

Plug the network cable between your computer's Ethernet port and your router or modem's Ethernet port.

Open the Settings menu.

The settings menu can be accessed by tapping on the Start menu (usually the Windows icon) and selecting the gear icon on the right.

Go to the "Network & Internet" settings.

In the "Settings" window, you should see the "Network & Internet" option, tap to enter.

Open the Ethernet settings.

In the Network & Internet menu, select the Ethernet option.

Configure Ethernet settings.

In the Ethernet page, make sure the Ethernet switch is turned on.

If you have more than one network adapter, you may need to choose the right one here.

Click on "Change Adapter Options" to further configure the Ethernet connection.

Configure the virtual network connection attribute of the wired network.

In the Network Connections window, find your wired network connection.

Right-click the connection and select Properties.

In the properties window, you can configure various settings such as IP address, DNS server, etc. Typically, you can use the default settings, unless your network administrator asks you to change them.

Test the connection. Once configured, you can test your wired connection by opening a browser or other web app.

These steps should be able to help you set up a wired connection in Windows 10. Note that the specific steps may vary depending on the burn-up version of Windows 10 and the settings of your personal computer, but they are generally similar.