What are your tie tie tips?

The flat knot is one of the most popular bow ties for men, and it is suitable for almost all kinds of material ties. Tip: Make a hole under the bow tie so that the sides are evenly and evenly matched.

Cross knots (semi-Windsor knots), this knot shape is very elegant and rare, the size of the knot is between the ordinary knot and the Windsor knot, its style is more complicated, it is easier to use with a thin tie, and it is best worn with a pointed collar and a regular neckline series of shirts. The correct way to play is to press the wide side to the narrow side, first make a circle on the wide side, then circle around the narrow side, and then let the wide side pass through the circle and tie it tightly. The common point of the cross knot and the Windsor knot is that the narrow side does not move on one side, and the wide side wraps around the narrow side, so that when opened, it is a slipknot instead of a dead knot.

Cross knots, which are suitable for thin ties with a single color and elegant material, may be used more for men who like to show off their fashion sense. A delicate tie with a double loop knot creates a stylish look and is suitable for young office workers. The special feature of this bow tie is that the first circle will be slightly exposed outside the second circle, so don't cover it deliberately.

The Romance Knot is a perfect look, so it can be used on necklines and shirts in a variety of Romance collections. The correct way to play is to keep the narrow side of the tie on the left side of the body, reserve a long space on the wide side, press the wide side to the narrow side, and then wrap it around the neckline, then use the wide side around the narrow side, wrap the wide side out of the neckline, and then let the wide side wear out of the circle around it, and finish it. When the bow tie is completed, the wide side under the bow tie can be folded to reduce the knot, and the narrow side can be moved to the left and right so that a small part appears next to the wide side of the tie.

The simple knot (coachman's knot) is the most common type of bow tie that is best worn in shirts with standard and button-down necklines, and is used for thicker ties. The correct way to play is to keep the narrow side of the tie on the left side of the body, press the narrow side to the wide side, flip the wide side from top to bottom at 180 degrees, circle around the narrow side, and then pass the wide side through the neckline in the loop, hide the fold behind it, and adjust the length of the tie when it is finished.

The Windsor knot is said to be the most orthodox way to tie a tie invented by the famous Duke of Windsor in England. Because the width of this knot is wider than that of a regular knot, it is ideal for use on shirts with Italian necklines (figure-necks) and is often paired with silk ties. The correct way to play is to keep the narrow side of the tie on the right side of the body, press the wide side to the narrow side, first wrap it out from the neckline on the narrow side, and then return to the wide side and wrap it around the neckline to yourself, and wrap it around the narrow side, so that the wide side is tied through the loop, and it is done.

The four-hand knot (single knot), which is the easiest of all ties, can be paired with a variety of shirts and ties. The correct way to play is to keep the narrow side of the tie on the right side of the body, press the wide side on the narrow side, use the wide side around the narrow side, and then pass the wide side under the ring part of the neckline, and then the wide side through the ring hole around it to tighten and straighten to complete the knot.

1. Half Windsor knot tie play: the tie is placed one long and one short, the long one is on the top and the short one is below, and the long one is wound from the top to the bottom. Wrap the long one in a circle, pull the long one to the side and adjust the position, tuck the long one into the slipknot, straighten it down, tidy it up, and finish.

2. Kent knot tie play: the long one is on the bottom, the short one is on the top, and the long one is put on the top. Pull the long one from the outside to the inside, tuck the long one into the slipknot, adjust the position and elasticity, and this simple Kent knot tie is complete.

Choose a tie that folds one part of the Erchang rock, the thick end is on the top, tie a single knot, and then go around the front end and pass through the crossing, and then pass through the circle just winded. The specific steps are as follows:

1. Fold the tie in half.

2. Put the thick end of the tie on top and form a circle.

<>4. Hold down one-half of the tie with your left hand and do not move, and fold the thick end of the tie with your right hand and wrap it around.

5. Continue with your right hand and fold the thick end of the tie behind the collar with the bridge.

6. Continue with your right hand and fold the thick end of your tie through the front.

Seven jujube counts, hold the tie with the left hand and do not move, and the right hand tightens and straightens the thick end of the tie that passes through the front. At this point, the tie is basically formed.

8. Tighten and straighten from the front and back of the tie respectively.

[Precautions].The thick end of the tie needs to be left longer, otherwise it will affect the appearance.

How to tie a tie:

Steps. 1. Keep the narrow side of the tie on the right side of your body and press the wide side on top of the narrow side. Steps.

2. Wrap the wide side around the narrow side and wrap it around the right band. Steps.

3. Pass the wide side under the ring of the neckline, and then tighten the wide side through the ring hole around it. Steps.

Fourth, the wide side is then tightened through the annular hole around it. Steps.

5. Straighten and adjust to the right size.

The history of the tie

Ties began in the days of the Roman Empire. At that time, the soldiers wore a kind of bridge leak around their necks that resembled scarves and ties. It wasn't until 1668 that the tie began to become what it is today in France and developed into an important part of men's clothing, although the tie was looped around the neck twice and hung casually at the ends.

There are also three or four flower-knotted wavy ribbons under the tie, and the tie has become a must-have for important occasions when men go out to the bridge in modern society.

The role of a tie is to break the monotony and dullness and play the role of decoration. The role of the tie is to keep warm, because men wear shirts more, but the buttons of the shirt do not ensure that the wind does not drill into the arms, and the tie can just make up for this defect and play a role in keeping warm, which is why most men wear ties when it is cold. Sensitive mask.

Tie tie is part of men's attire, and here are the steps to tie it correctly:

Empty the Tie, the bucket book will be the big end down, the small year let the end up, fixed in the tie clip, easy to operate.

Wrap the tie around your neck, making sure the big end is about 30cm longer than the small end, and cross the big end over the small end.

Pull the big end tight by passing it through where the small end crosses the neck and through the small hole from underneath.

Cross the big end to the left or right, then through the tie loops from above, and pull it down.

Thread the big end through the last crossing from above, then thread it through the well-worn neckline and adjust the tie.

Finally, the tip of the tie should be above the waistband, and the knot between the big end and the small end should be tight and neat. Remember, the length of the tie should be appropriate for your height and body shape. With a few more practice, you'll be able to tie your tie proficiently.

The steps to tie the tie are as follows:

1. Cross the tie with a "ten" figure on the chest, the wide end is longer, and the thin end is shorter, as shown in the following figure:

2. Fix the intersection with your hands, and then cross the long tie through the intersection from back to top, as shown below

3. After the long tie passes through the intersection, go forward and then circle to the left, as shown below

4. Then wrap the long tie around the right from front to back, as shown below

5. Then horizontally wrap the two knots from the front, as shown in the following figure:

6. Then wrap the tie from the front to the back and then forward, as shown below

7. Pass the long tie down from the circle that you just bypassed horizontally, and a Windsor knot will be tied, as shown below

The fast way to tie is simple and practical, and you don't have to worry about wearing a tie anymore.

Smart men will never wait until they wear a suit to learn to "tie". Tie is the most important clothing accessory for men to reflect taste, temperament, identity and economic ability. So here we have systematically sorted out 3 ways to tie a tie, teach you from the basics of playing, so that you can adapt to all changes with the same Many people's goal is to become an outstanding writer, and the first skill of an outstanding writer isFabrication

The so-called fabrication does not mean making up nonsense, but giving you a topic or trunk, and you can smoothly expand and supplement its flesh and blood, so that it has vitality in your pen. No one can fabricate a story when they come out of their mother's womb, and this requires practice.

When I first started writing, I was obsessed with practicing the beginning. Often, after a basic outline, I start to "fabricate" the beginningThe beginning of the ** is very Taoist, I will first look at the beginning of 6-10 classics**, and then according to the ideas given at these beginnings, write seven or eight beginnings at a time。After a long time, I realized that this beginning was a test of skill.

If you start with a bland beginning, the back will often be bound by the atmosphere provided by this beginning, and it will be difficult to turn over; And if you use a beginning with ups and downs and suspense, you can enter the plot fairly easily and develop extremely quickly.

Sometimes you will be Kavin, just sit there, maybe you can't write anything in the afternoon, your mind is a mess, at this time, don't get into the horns, learn to treat the stuck phenomenon in training correctly. It makes sense to stumble, but it doesn't make sense to stumble on a desperate road, so use the right way and method, when you are not willing to skip the next paragraph, you can directly solve this paragraph in a blunt way, there is an advantage here: you can find your weaknesses.

Write this paragraph in reverse after the whole is written, at this time you have a clear structure of the whole book, and the context is clear, and then write 10 versions of this paragraph, and you can easily solve it the next time you encounter a similar situation.

The correct way to tie a tie is to tie the tie on both sides and cross the knots, rather than wrapping the one-sided tie in a circle and threading the other side through.

1.Start with the tie facing the back side outward. The wide end should be placed on the right side and the narrow end on the left.

2.I cross the right and left of the tie, and the wide side is on top of the thin side. 3.

Wrap one side of the wide tie down to the right of the thin tie and the wider tie to the left. 4.I wrap the wide tie around the lower end of the bow tie and wear it from the bottom to the top.

5.Then cross the bow tie horizontally downward, and finally, according to the degree of adaptation of the neck, tighten the bow tie, and the four-hand knot is completed.

The correct way to play is to hold the wide end with the right hand, and the small one is crossed on top of each other, wrap the large section around the small section, continue to turn the large section from the right hand side to the left hand side, and also turn the large single under the bow tie, and turn it out from the neckline position and tie it tightly.