How to polish the floor tiles bright and clean

Here's how to wipe the floor tiles bright and clean:

1. White vinegar. White vinegar is a good edible detergent, so to speak, white vinegar can be used in many aspects of life to clean, such as the kitchen will use white vinegar to clean, of course, bathroom tiles or other tiles can also be cleaned with white vinegar, white vinegar can clean oil and sterilization.

2. Toothpaste. In the past, toothpaste was used to clean the gaps of the tiles, and the gaps in the tiles were not easy to clean, but the toothpaste can effectively clean the gaps in the tiles, and the gaps in the magnetic beads can be cleaned with an old toothbrush dipped in toothpaste.

3. Baking soda.

Baking soda is often used in life as a chemical living item, especially baking soda as an alkaline substance, it is still very good in cleaning up oil stains, if the tiles at home are dirty, you can try baking soda, and you can clean the tiles well with a scouring pad dipped in soda.

4. Tile cleaner.

Tile cleaner is a kind of cleaning agent specifically for ceramic tiles to clean, this kind of cleaning agent is indeed very effective, as long as you buy a big brand of regular tile cleaner, basically no matter how dirty the tile can be cleaned.

5. Laundry detergent or dish soap.

Laundry detergent and dish soap are the most household cleaners, such as brushing dishes, brushing pots, brushing sinks, kitchen sinks, etc., you can use laundry detergent or dish soap, in addition to using in these places, in fact, if the tiles are not easy to clean with oil, and they are not clean with a linen cloth, you can try them with dish soap or washing powder, and there may be unexpected good results.

Floor tiles are one of the common floor materials in home decoration, which is not only beautiful and durable, but also easy to clean. However, how to properly wipe the floor tiles to keep them shiny and clean is a matter of concern. This article will introduce you to a few ways to make your floor tiles shine like new.

1.Remove dust from the surface.

Before you start deep cleaning, you should first remove dust and debris from the surface of your floor tiles. You can use a soft-bristled brush or mop to sweep the floor and make sure all the debris is completely removed. Doing so will better protect the surface of the floor tiles by avoiding the rubbing of dust and debris against the floor during the wiping process.

2.Choose the right cleaner.

It is very important to choose the right cleaner for your floor tiles. In general, neutral cleaners are the safest and most effective option. Be sure to follow the instructions on the detergent package and dilute the detergent in the correct proportions.

Using excessive amounts of cleaners may leave residue on the floor and may damage the surface of the floor tiles.

3.Wet mop floor tiles.

After diluting the detergent, gently wipe the surface of the floor tiles with a damp mop. Make sure the mop is not too wet to get moisture into the crevices of the floor tiles. Also, avoid using too hard or rough mops to prevent scratching the floor tiles.

4.Removes stubborn stains.

If there are stubborn stains on the floor tiles, such as oil stains or shoe prints, you can try the following methods to deal with them:

Use specialist cleaners: There are many cleaners on the market that are specifically designed to remove specific stains, choose the right one for your situation, and follow the instructions.

Homemade cleaner: Lemon juice, baking soda, and warm water can be mixed to create an effective homemade cleaner. Gently apply it to the stain and wipe it with a damp mop.

Steam cleaning: Use a steam cleaner to remove stains quickly and effectively without the use of chemical cleaners.

5.Regular maintenance.

In addition to regular wiping, floor tiles also need regular maintenance to keep them shiny and clean. Follow these care recommendations:

Avoid using too much water: Be sure to control the amount of water when wetting the mop to avoid too much moisture entering the brick joints and causing prolonged dampness.

Use carpets or mats: Placing carpets or mats in doorways or high-traffic areas can reduce the impact of stains and wear on floor tiles.

Regular waxing: According to the requirements of the floor tiles, use appropriate wax for regular care and maintenance.

With the right cleaning methods and regular maintenance, you can keep your floor tiles shiny and clean. Removing dust, choosing the right cleaner, wet mopping floor tiles, dealing with stubborn stains, and regular maintenance are key to maintaining the appearance of floor tiles. At the same time, be sure to follow the product instructions and pay attention to the use of appropriate tools and methods to ensure that the floor tiles remain in a beautiful and durable condition for a long time.

Soapy water: Floor tiles can be mopped with soapy water during daily cleaning. The method is to rub some soap into some foam in water, then soak it in soapy water with a cloth or mop, wring it out a little and scrub it for the first time, and then scrub it with water for 1 or 2 times.

1. Soapy water.

In general, we clean the floor with clean water, but if there are stains on the floor tiles that are difficult to remove, you can use soapy water to clean them. Moreover, you can also mop the floor with soapy water during daily cleaning, so that the floor will be kept clean and shiny. The method is to rub some soap in the water to make some foam, when it feels about the same, take a mop or cloth and soak it in the soapy water, and then wring it out (not too dry) to mop it on the place, after wiping it for the first time, then change it to clean water to wipe it a second time, if you feel that the floor is still relatively slippery, you can drag it a third time.

2. Dish soap.

There are many detergents in the home that can be used to clean floor tiles, such as dish soap. In daily cleaning of the floor, you can squeeze some dish soap in the water and stir to mix, and then use a mop or cloth to scrub it. However, the dish soap is more foamy, and after the first time, you need to use water to drag it more, so that it will not slip.

3. Sawdust + laundry detergent.

Usually, when taking care of the floor tiles, you can use sawdust and laundry detergent to clean them, and the effect is very significant. The operation method is to sprinkle sawdust and laundry detergent on the floor, and then take a damp cloth to wipe the floor with sawdust laundry detergent, so that after wiping for the first time, then wipe it with water and wipe it again, so clean enough that the floor is very clean and bright.

4. Salad oil.

Salad oil is also one of the items that can make the floor shiny. All you need to do is add a few drops of salad oil to the water in which you are cleaning the floor, and you're good to go. The floor cleaned in this way is much brighter than the floor that is cleaned directly with clean water.

5. Baking soda.

Baking soda has always been a must-have item for decontamination in the home, so baking soda can also be used to clean the floor. The cleaning method is to mix baking soda with water in a certain proportion, then dip it in with a cloth, wring it out slightly, and wipe it off. For areas where the stain is more obvious, you can sprinkle some baking soda alone, and then wipe it with a damp cloth.

1. Wipe the floor with conditioner to make the floor tiles bright and clean. Conditioner is not only suitable for hair, it has the effect of protecting the hair texture, and it can also bring a brightening effect to the floor tiles. To use it, pour the conditioner into water to dilute it, and wipe it with a rag on the floor tiles.

2. Store the water left by the rice and use it for mopping the floor, and the effect is not wrong. Rice washing water can clean the surface of the floor tiles and increase the gloss of the tiles.

3. Use baking soda to clean the floor tiles, and the cleaning effect is also okay. When cleaning, first pour baking soda on the prepared rag and then wipe it to give the tile a glossy finish.

If there is a hollow drum in the corners of the floor tiles, then open a small hole in the floor tiles, and then use professional tools to pour the cement mortar directly into it, and gently knock the floor tiles in the process of pouring, after the mortar is poured in, the small holes need to be repaired with glue. If there is a hollow drum in the middle of the floor tiles, or the overall hollow drum range is particularly large, then in this case, it is necessary to clean up the gaps of the floor tiles, then hit the floor tiles with a hammer, and finally use a suction cup to take out the floor tiles, after taking out the floor tiles, you need to pry off the cement mortar inside, and then re-lay the cement mortar at the bottom layer, and finally cover the floor tiles.

There are still many specifications and sizes of floor tiles, such as common sizes of 1 meter 1 meter, meters of rice, meters of rice, meters of meters, meters of meters, meters of meters. When decorating, you need to choose the right size according to your own preferences and the overall decoration style of the home, and also look at the decoration area, for example, when decorating the bathroom, most of them use meters, or use meters. But if you are decorating the living room, most of them use 1 meter 1 meter, or directly use 1 meter, but also look at the size of your home.

1. How to wipe the floor tiles bright and clean.

1. Wipe the floor with conditioner to make the floor tiles bright and clean. You know, conditioner is not only suitable for hair, it plays a role in protecting the hair, but also can bring a brightening effect to the floor tiles. To use it, simply dilute the conditioner in water and wipe it with a rag.

2. It is not wrong to store the water left by the rice and use it for mopping the floor. Rice washing water can not only clean the stains on the surface of the floor tiles, but also increase the gloss of the tiles.

3. Use baking soda to clean the floor tiles, and the cleaning effect is also okay. When cleaning, first pour baking soda on the prepared rag, and then wipe the floor tiles, which can make the tiles full of gloss.

4. Or mix milk with white vinegar and water in a certain proportion, and then wipe the floor tiles with a rag, which can clean up the stains on the surface of the floor tiles, and increase the gloss of the surface of the floor tiles.

Second, what is the daily maintenance of floor tiles?

1. In daily life, it is necessary to ensure that the surface of the floor tiles is clean and tidy, and do not bring dust and sand particles into the room, otherwise it is easy to rub against the floor tiles, thereby wearing the floor tiles. If you accidentally rub on the floor tiles, you can apply toothpaste and wipe with a soft cloth to remove the marks.

2. It is necessary to avoid heavy objects hitting the floor tiles, or sharp objects scratching the floor tiles, if there are gaps, it is very difficult to deal with, and in serious cases, it is easy to cause direct damage to the brick surface. If the floor tiles are damaged in a large area, they need to be washed and paved, which is very troublesome.

Flooring is a very important part of house decoration, because it can not only affect the overall visual effect of the house, but also closely related to our daily life, so the maintenance of the floor is particularly important. If you want your floor tiles to be bright and clean, here are some simple and practical ways to do it:

1.Daily cleaning: Daily maintenance is the foundation of keeping your floors clean.

You can usually scrub with a wet mop, choose a special cleaner and mop to avoid damage to the floor tiles. When wiping, ensure that the mop is dry and wet, and use a fan or air conditioner to accelerate the drying after mopping.

2.Use a dishwasher that rotates at a low speed: Because manual washing does not necessarily wipe every pore and crack, and there is too much moisture, it is difficult to achieve the effect of full drying before washing, resulting in some water marks and dirt on the floor tiles after washing, and using a dishwasher that rotates at too low speed can solve this problem well.

Especially during the rainy season, which often causes damp and damp houses, a dishwasher that rotates at low speed is a must.

3.Steam Cleaner: A steam cleaner is great at removing dirt, bacteria, and viruses, keeping your floors not only clean but also healthy.

The steam cleaner heats the water into high-temperature water vapor, and thoroughly removes dirt, odor and bacteria from the surface of the floor tiles through a powerful water vapor nozzle, while eliminating stains and bacterial hazards, playing the role of sterilization and disinfection, which can better maintain the health of the floor and your family.

4.Use a professional cleaning service: If the floor tiles are old or dirty, we can seek a professional cleaning service.

They have professional equipment and cleaners that can deeply clean the pores of the floor tiles and give the Zen Jing floor tiles a new look. With professional tools and techniques, the cleaning effect is better, and the floor tiles can be kept clean and bright for a long time.

The above is the way to keep the floor tiles clean and bright, of course, each method is suitable for different situations, you need to choose the right method according to the specific situation, in order to better play their effect, so that our home environment is more tidy and clean.

To make the floor tiles bright and clean, you can use the following steps:

First, use a broom or vacuum cleaner to clean up dust, debris, etc. from the floor.

Next, use clean water or water with detergent to wipe down the floor. You can choose a special floor cleaner or a white vinegar solution for cleaning. Mix 1:10 of white vinegar with water, pour it onto the ground and wipe the floor with a flatbed tow or soft sponge.

If there are stubborn stains on the floor, they can be treated with alcohol, white vinegar or a special cleaning burner. Spray it on the stain and gently wipe it with a clean cloth or sponge.

Finally, wipe the moisture dry with a clean, soft rag or water absorber and keep it ventilated to allow the floor to dry thoroughly. Standing water can affect the quality of the floor, so try to dry it as thoroughly as possible.