The network speed of China Telecom is slow, and I installed network TV, but it has been dropped coun

This is caused by the aging of the line (optical cable) from the base station to you, or the broken wire connected to your home and the poor contact between the connectors and connectors.

First of all, the methods you have tried are enough to rule out the wiring problems and equipment problems in your home; All that's left is the outdoor wiring; If the trunk line is aging, then it will definitely affect more than you, you can unite several to go to the telecom company or ** to complain, they will change; If this is the case for you alone, then you should consider replacing the outdoor leather wire, which you can also call ** or go to the telecommunications company to carry out the obstacle warranty, and ask the maintenance master to test whether the leather wire is damaged when you come.

According to your description: You take the router off to see if you can get online. If you can access the Internet, either the telecom company restricts the use of the router, or the router is a problem with the settings, it is recommended that you can see if other users can use the router, and then set it up after restoring your router to factory settings, telecom broadband is free to increase speed, 4m liter 8m, 12m, 8m liter 20m, 20m liter 50m.

You can go to the nearest telecom business hall, or call 10000 for free speed, details can be logged in Anhui Telecom online business hall.

Have a great day! Hope mine is helpful to you and can get yours!

Problems with routers.

First of all, you can check if there is a problem with the settings of the router, and you can restart the router or reset the router to solve it.

Secondly, it may be that the router is too old and the firmware version is too low. You can upgrade the firmware, just look for the latest firmware of the corresponding model on the Internet.

Finally, the router may not be placed correctly. The router should not be next to a microwave oven or induction cooker.

Weak current box, etc., and try to place it in the first place of the house, and it is an open place, which is conducive to the transmission of signals.

TV system reasons.

If there is a problem with the TV system, it will also cause the network to be disconnected, so you can try restarting the TV.

If restarting doesn't work, consider restoring your TV.

Factory set it up or upgrade to the latest version to get your TV system back up and running.

TV hardware failure.

If the TV is used for a long time, the hardware will also fail, such as the failure of the network module, the failure of the motherboard and other components, etc.

In this case, the only way to contact the aftermarket for replacement parts is to contact the after-sales service. If the parts are high, it is recommended to directly replace it with a new TV.

First, the problem of heat dissipation.

In summer, due to the rise in temperature, a TV or box that has been in operation for a long time, if it cannot be dissipated in time, it is easy to cause internal overheating problems, resulting in broken contact or thermal protection. The reason for this situation may be the poor location of the vents, or the poor heat dissipation of the TV due to the accumulation of dust for a long time, at this time, it is recommended to clean the vents, and do not pile too much debris near the machine to affect the heat dissipation.

Second, there is a problem with the infinite router.

If the router is old or the firmware version is too low, it may cause the wireless network to be unstable and often drop. At this time, you can go online to find the latest firmware of the corresponding model and complete the firmware upgrade.

3. Hardware aging problems.

The wear and tear of parts caused by long-term use can easily make the operation of the TV or box unstable, resulting in an increase in the probability of problems. In this case, the only way to do this is to replace the parts or simply replace the entire equipment.

Fourth, there are sources of signal interference.

Wired broadband can be used, but wifi is not. In this case, observe whether there is a signal interference source next to the router, such as a microwave oven or induction cooker. These devices will affect the signal, so that the TV or box can not receive a full signal well, which may cause the wireless network to disconnect when the network fluctuates.

At this time, you can move the position of the router, it is best to place it in the middle of the house, a higher and open place, without objects to cover it, so that the signal is stronger and the divergence is farther.

5. System reasons After the TV or box is upgraded in the system, there may be some bugs, resulting in the device not operating normally. At this time, you can only downgrade or find system patches to install, fix software system bugs, and resume normal operation.

Causes of network instability. It's best to connect it with a network cable, so the effect will be better.

If the wireless network is always dropped, it should be a network connection problem, that is, the network at home is faulty, and the network at home also needs to be checked. Check whether the transmission system of the modem is faulty.

This situation is likely to be the reason for this signal in your place, so it is recommended to rearrange this network signal, and then re-plug this plug to see if it can be solved.

If the distance is too far, the signal will drop.

If the router is powered on for a long time, it will cause disconnection, choose a high-quality router and turn it off when you don't need it.

You can check if there is a problem with the settings of the router, and you can restart the router or reset the router to solve it.

1. Heat dissipation problemsWith the rise of temperature, especially in summer, if the TV or box is in operation for a long time, if the location of the vent is not good, or the internal overheating problem caused by long-term dust accumulation, it is easy to cause breakage or thermal protection. In this case, it is recommended to clean the vents and not to pile up too much debris near the machine to dissipate heat. You can also use a slightly larger chess piece or other items to pad the bottom of the box to raise the bottom to ensure good heat dissipation during use.

Why does Hisense TV frequently disconnect when connected to a wireless network? Now I finally know! Second, the hardware aging problem, the wear and tear of parts caused by long-term use, it is easy to make the operation of the TV or box unstable, resulting in an increase in the probability of problems.

In this case, the only way to do this is to replace the parts or simply replace the entire equipment. 3. If the network signal is unstable, if the wireless router at home is deployed in a corner of the stove, so that the TV or the hail box cannot receive the full signal well, it may cause the wireless network to be disconnected when the network fluctuates. At this time, we may need to move the router closer to the TV or box.

Fourth、System reasonsAfter the TV or box is upgraded in the system,There may be some bugs,Resulting in the device cannot operate normally,At this time, the split sail can only be downgraded,Or find a system patch for installation,Fix the bugs at the software system level,Restore normal operation。

Hello dear <>

1. It may be caused by a problem with the network settings of the TV, you can reconnect to the wifi signal at home. 2. It may be caused by a problem with the router settings or a router failure, you can restart the router to solve it. Or restore the router to factory settings and reset the network parameters to solve the problem.

If the router hardware is faulty, you need to contact the after-sales service for maintenance or replace the router to solve the problem. 3. It may be that the network line or server of the network service provider is interrupted or faulty, resulting in the router being unable to connect to the network, in this case, the TV will also be disconnected, and you need to contact the network service provider to solve the network transmission problem first. 4、It may also be a TV system problem that causes the network to be abnormal,You can restart the TV to solve it,If necessary, you can enter the system setting interface,Restore the system of the TV to the factory setting state or upgrade to the latest version to solve it。

1. The problem of the network itself: the server bandwidth of the target location of the TV connection is insufficient or the load is too large. 2. The network speed slows down due to network cable problems, and the twisted pair is tightly twisted together by four pairs of wires according to strict regulations, which is used to reduce crosstalk and background noise.

3. There is a loop in the network, which causes the network speed to slow down, and the use of alternative network equipment or the infection of alternative devices with viruses leads to the occupation of resources. 4. The network speed slows down due to hardware reasons of network equipment. The router or cat heats up during use, resulting in data loss.

1. Generally, if the set-top box or cat does not shut down for a long time, turn off the cat and the set-top box and restart it, and wait for 5 minutes to try.

3. It is recommended to log in to the online business hall for the network speed test, if the test is not up to standard, solve the problem of slow network speed first.

Other secondary reasons:

Someone rubbed the net. The computer's system has too much junk, causing the illusion of a network card.

If the router or modem is on for a long time, the processing speed may be slow due to the increased amount of data redundancy.

The router or modem is overheating, causing its data processing to be slow.

Operator issues: Large network delays occur at night or during peak hours when people are staying at home, such as schools.

If a network card occurs, you can try restarting the router and modem. If the problem cannot be solved, you can contact the local telecom staff to deal with it.

The above information is for reference only, gigabit in the city, C-position debut. 5G dual gigabit**, 1000M broadband, 60G traffic for the whole family, details can be found in Guangxi Telecom's online business hall. Customer service number 29 will answer for you.

5. Internet access and call cannot be carried out at the same time, or the contact of the ** wire connector is poor, or the quality of the separator is not good.

Hello, if Telecom keeps dropping the line, there are many reasons, and they need to be ruled out one by one to know what the exact reason is?