LENOVO G480 OPTICAL DRIVE DOES NOT READ DISKS

Dear Lenovo users, hello!

Please use a thin stick to press the small hole of the optical drive to see if it can pop up. If you can, try it with a CD with a boot function to see if it can be read, such as a system disk. If you can't even read the boot disk, it is a hardware problem with the optical drive, please bring your computer to a nearby service station for testing and repair.

IDEA Forum.

Think Forum.

Lenovo Community.

Generally, there is no need to install a separate driver for optical drives, and the operating system can generally install drivers automatically.

You can try to reinstall the motherboard driver to see if it can be solved, in addition, the following technical document can give you a reference, Windows 7 system under the *** optical drive can not recognize the solution:

If you can't solve the problem, please go to your local Lenovo service center for processing.

Summary. Hello. Lenovo E480 is available for optical discs.

The following are the operation steps of Lenovo E480, 1. After the computer is turned on, click My Computer (Computer) on the desktop. If I don't have my computer on the desktop, I can click the Start Menu - Computer - *** Drive. The same can be opened.

2. After clicking on, click on the removable storage device *** drive (e). 3. After clicking, there is a "pop-up" option in the upper left corner of the page. Once you click on it, the optical drive will pop up.

4. After ejecting, place the disc longitudinally on the left side of the main unit. Be sure to check if it has been placed correctly, the disc is not properly placed, and it is very troublesome to fall into the chassis. 5. After putting the disc away, push the disc drive in by hand.

Your hall is closed. Lenovo E480 is available for optical discs. The following are the operation steps of Lenovo E480, 1. After the computer is turned on, click on my computer state stove (computer) on the desktop.

If I don't have my computer on the desktop, I can click the Start Menu - Computer - *** Drive. The same can be opened. 2. After clicking on, click on the removable storage device *** drive (e).

3. After clicking, there is a "pop-up" option in the upper left corner of the page. Once you click on it, the optical drive will pop up. 4. After ejecting, place the disc longitudinally on the left side of the main unit.

Note that you must check whether the sedan has been placed correctly, the disc is not placed properly, and it is very troublesome to fall into the chassis. 5. After putting the disc away, push the disc drive in by hand.

I'm still a little confused, can you be more detailed?

Your hall is closed. Lenovo E480 is available for optical discs. The following are the operation steps of Lenovo E480, 1. After the computer is turned on, click on my computer state stove (computer) on the desktop.

If I don't have my computer on the desktop, I can click the Start Menu - Computer - *** Drive. The same can be opened. 2. After clicking on, click on the removable storage device *** drive (e).

3. After clicking, there is a "pop-up" option in the upper left corner of the page. Once you click on it, the optical drive will pop up. 4. After ejecting, place the disc longitudinally on the left side of the main unit.

Note that you must check whether the sedan has been placed correctly, the disc is not placed properly, and it is very troublesome to fall into the chassis. 5. After putting the disc away, push the disc drive in by hand.

There are buttons on the side of the optical drive, press it once and it pops up, and then you pull it out.

Dear Lenovo users, hello!

Dear Lenovo users, hello!

Generally, there are physical buttons on the optical drive, and you can make the optical drive pop up by pressing the physical button on the optical drive.

IDEA Forum.

Think Forum.

Lenovo Community.

Normal computers are F1, F2 into the boss. Find SATA Mode or Serial ATA Mode in the BIOS, select , press Enter, and select Combinated mode. If there is no committed mode, set it to IDE mode.

In fact, it comes down to the wrong choice of hard drive mode.

The system can't find the hard disk because the boot item is wrong, reset it:

1. Plug the hard disk into the computer and restart, press the del key (or press the F2 key) when the machine is turned on;

2 Go in and use the arrow keys to select the menu, and select the fourth option in the figure below is hard disk boot.

Dear Lenovo users, hello!

If it can be recognized under the BIOS, it is recommended that you replace the original operating system installation CD for installation. If the hard disk device is not recognized under the BIOS, it is recommended that you send it to your local Lenovo service station to see it, and ask the engineer to help you deal with it.

Lenovo service station information inquiry:

Are you using ghost, change the hard disk mode.

Open it to see if the hard disk cable is off, it is recommended to go to the after-sales service to see.

Lenovo notebook disc can't be read for the following reasons:

The optical head in the optical drive of the notebook is aging, so the optical drive needs to be replaced.

If there is dust in the optical head of the notebook optical drive, you can eject the optical drive and wipe the optical head with special lens cleaning paper.

The disc is scratched and cannot be read.

The disc is dusty and can be cleaned up with a disc wipe.

Dear Lenovo users, hello!

Dear Lenovo users, hello!

Hope it helps!

Set the optical drive or USB flash drive as the first boot item of the motherboard BIOS. Reboot and press the F8 key to force the installation system, and you can flash and format the C disk halfway. System installation updates are not easy to fail!