HOW THICK IS 120G BOOK PAPER? How thick is 160g of paper

It depends on how much paper you use, how big the font you are printing, whether you print on both sides of the paper and the thickness of the paper. I'll give you a conservative estimate on A4 paper. If you use A4 paper, the font size is smaller, and you can print both sides.

It's almost 1mb to print 1cm thick paper. 120g=122880mb That is, you want to print A4 paper with thickness.

And this is still a conservative estimate.

The thickness of 120g paper depends on the size and quality of the paper, generally speaking, the thickness of 120g paper is between tens of microns and hundreds of microns.

For example, if we consider A4 paper as an example, if we consider using regular A4 paper, if the weight per square meter of paper is 750 grams, then the volume per square meter of paper is:

Mass = density volume.

Volume = mass density.

Mass = 750 grams.

Density = kilogram cubic meters.

Volume = 750 grams of kilograms cubic meters.

Volume = cubic meters.

Then, if we want to print 120g of information on A4 paper, we need to consider the font size of the print and whether to print both sides. Assuming the font size is smaller, and you print on both sides, the amount of information on each square meter of paper is about 1MB. Then the thickness of 120g of paper can be estimated as:

Thickness = amount of information Volume per square meter of paper.

Thickness = 1mb cubic meter.

Thickness = meters. This figure is only an approximate estimate, and the actual thickness of the paper may vary slightly depending on the quality of the paper, processing procedures, and other factors.

160 gramsWhite cardboardThe thickness is.

Sketch paper 160g is the weight of a piece of zero-open paper, in general, it can be used to distinguish the *** of the paper is still not good. The higher the gram count, the better the quality of the paper. And it is wear-resistant and rub-resistant, generally used in sketches with 150 grams of ***, and it is easy to modify the picture.

The size of the paper is regulated by the state, the better the paper, the heavier, the thickness, weight and quality of the paper are directly proportional. So 160g is actually an indication of the quality of the paper.

Introduction to paper

Paper, also known as matte felt paper, is made up of plant fibers.

The original dust material is made by pulping, modulation, copying, processing and other technological processes, and can be used for painting, printing books and newspapers, packaging, etc. Different from the 糹氐, the 糹念譐 is the animal fiber "silk". It is possible to fold any piece of paper for writing.

Paper is a carrier for writing, printing, and can also be used for other purposes such as packaging, hygiene, etc., such as printing paper.

Carbon paper, toilet paper.

Due to the invention and popularization of paper, human beings can no longer use mud, stone, wood, pottery, metal and other materials to record words or pictures, and also make a large amount of information in ancient times be disseminated and preserved.

Paper: A general term for potato high Zen paper. Paper is counted in sheets, so paper is generally divided into: letterpress printing paper, newsprint, offset printing paper.

Coated paper, book cover, dictionary paper, copy paper.

Boardboard, rice paper, straw paper, etc.

I don't know, the grams of A4 paper are inconsistent, and the thickness is not the same. It is commonly used for 73 grams, but there are also 100 grams.

A4 paper is made by the International Organization for Standardization.

ISO 216 defines the size of 21*, and most countries in the world use this international standard for paper sizes. This criterion was originally adopted by the Weimar Republic.

In 1922 it was incorporated into DIN (DIN 476), and although some of these formats were developed in France at the same time, they were later forgotten. ISO 216 defines three groups of paper sizes: A, B, and C. Group C paper size is mainly used for envelopes.

The aspect ratio of Group A paper sizes is 2:1 and then rounded to the nearest millimeter. A0 is defined as an area of one square meter with an aspect ratio of 2:

1 piece of paper. Next A1, A2, A3 ......For other paper sizes, it is defined as folding the paper with one less number along the long side and rounding it off to the nearest millimeter. The size of the B paper is the geometric average of the paper in Group A with the same number and one less number.

Before the popularization of printers, B-group paper was often used. Group C paper size is mainly used for envelopes.

National Standards of the People's Republic of China.

GB T 148-1997 "Format Dimensions for Printing, Writing and Drawing Paper", which is not equivalent to ISO216:1975.

The weight of A4 paper is not the same, so the thickness is also different.

Most of the office in the south and coastal areas is 80g paper, while in the northeast and north, 70g printer paper is mainly used for office. Take 70 grams of A4 paper as an example: 100 grams of paper is known, count the number of sheets.

For example, a piece of A4 paper is 70 grams, the size is 210*297, there are 100 grams, and I want to know how many 70 grams of A4 paper are used.

Calculation: 210mm*297mm is the positive degree of a piece of paper, and 70 is the gram weight after multiplication, that is, 70g m2; So multiply these numbers to get it: a piece of paper is, and then divide it by 100 grams, that is, a sheet.

1 sheet of A4 paper is about, so the thickness of 100 grams of A4 paper is about 10-20mm.

1200 sheets of paper have 120mm. How thick the paper is, multiply this number by 120 to know how thick 1200 sheets of paper are.

Paper, also known as matte felt paper, is made of raw materials containing plant fibers through pulping, modulation, copying, processing and other processes, and can be used for painting, printing books and newspapers, packaging, etc. Different from the glutinous fiber, the glutinous is the "silk" of animal fibers.

It is possible to fold any piece of paper for writing. Paper is the carrier of writing and printing, and can also be used as packaging, sanitation and other purposes, such as printing paper, carbon paper, toilet paper, tissue paper, etc., due to the invention and promotion of paper, so that human beings can no longer use mud, stone, wood, pottery, metal and other materials to record words or pictures, but also make a large amount of ancient information to be disseminated and preserved.

The slag collapse period of the Wei, Jin, Southern and Northern Dynasties.

Paper is widely spread, generally used by people, papermaking technology is further improved, papermaking area is also concentrated in Luoyang, Henan Province before the Jin Dynasty and gradually spread to Vietnam, Shu, Shao, Yang and Anhui, Jiangxi and other places, output, quality is increasing day by day. The raw materials for papermaking are also diversified, and there are many types of paper. Such as bamboo curtain paper, the paper surface has obvious lines, and the paper is tight and thin.

There is rattan paper made of rattan bark as raw material, the paper is uniform and smooth, white as jade, and does not leave ink. Dongyang has fish roe paper, also known as fish paper, which is soft and smooth. Jiangnan uses straw and wheat straw fibers to make paper, which is yellow in color and has a rough texture that is difficult to write.

In the north, the mulberry tree is made of mulberry stem bark fiber, the texture is excellent, the color is white, the light and soft are soft, the tensile force is strong, and the paper grain is torn off like cotton silk, so it is called cotton paper. Cai Lun papermaking raw materials are extensive, the paper made of rotten fishing nets is called net paper, and the paper made of rags is called cloth paper.

Take 10 sheets of paper and multiply them by 120 to see how thick 1200 sheets of paper are.

Do you know the thickness of one sheet? If you don't know, use a ruler to measure it, and if you don't think it's accurate, use a micrometer...

Summary. about millimeters.

about millimeters. 100 grams is 25 sheets, 1 sheet is about millimeters, so 120 grams is 30 sheets, so it is 3 millimeters.

A sheet of fully open paper specification domestic standard: cm cm, international standard:.

Positive (domestic standard) paper: 787 1092mm open (positive) Size unit (mm).

Full open 781 1086

2 open 530 760

3 open 362 781

4 open 390 543

6 open 362 390

8 open 271 390

16 open 195 271

Largeness (international standard) paper: 850 1168mm open number (large) size unit (mm).

Full open 844 1162

2 open 581 844

3 open 387 844

4 open 422 581

6 open 387 422

8 open 290 422

Note: Finished product size = paper size trimming size.

Summary. Millimetre.

Millimetre. um = micron mm = millimeter micron millimeter feed rate: 1 mm = 10,000 microns 80 microridge sedan um 500 sheets = 40,000 microns um = 40 mm mm80 500 = 40,000 (microns um) = 40 (mm mm) spikes.

How thick is <> 130 pounds of paper?

60-220 grams.

Oh oh, thanks.

You're welcome <>