If the same camera takes pictures at different resolutions, will the CCD be read out in the same way

I still don't understand what you mean, let me tell you about the CCD we usually use, a method of data transmission under pixel switching. For example, our company uses a lot of Yingmeijing 702U camera, which can be used as both 200W (1600*1200) and 500W (2560*1920). The readout is roughly the same as the four cells above you"Synthesis"One reads, but we are not synthetic, if you say that you are 200w, he is 200w pixels, there is no synthetic readout, he is 200w pixels read, 500w is read 500w pixels.

But why don't we use a larger 500W pixel instead of a 200W pixel, or because his data output is different, 500W obviously has to play a lot, which is basically proportional, but from the pixel aspect, it looks like a relationship between times, but in fact, it is a relationship. From this point, it can also be indirectly explained that the latter is closer to the question you asked above. The size of the CCD sensor is always the same, when you are 4K*4K, it is finer, the readout time is longer, and the 1K*1K time is shorter, which is equivalent to merging the four pixels into one before imaging, and there is no such thing as merging them first when the data is read.

Hope it helps.

It's 4K x 4K first**The information is read down,And then the machine converts it to 1K x 1K**,This is only for JPG format,If you go straight out of RAW,Then there are only two options,Large and small,It is recommended to use the large format every time,Otherwise, there will always be a time to regret!

Summary. Hello, I am glad to serve you and give you the following answers: The reason why the CCD camera reads out is because CCD (chargecoupleddevice) is an electronic device, which can convert optical signals into electrical signals to record the information.

The image sensor of a CCD camera is a grid of transistors, each of which captures light and converts it into an electrical signal. These electrical signals are sent to:

Hello, I am glad to serve you and give you the following answers: the reason why the CCD camera reads out the spine is because CCD (chargecoupleddevice) is an electronic device, which can convert the optical signal into an electric cherry blossom ruining signal, so as to record the residual information of **. The image sensor of a CCD camera is a grid of transistors, each of which captures light and converts it into an electrical signal.

These electrical signals are sent to:

Can you add, I don't quite understand it.

Hello, I am glad to serve you and give you the following answers: the reason why the CCD camera reads out the spine is because CCD (chargecoupleddevice) is an electronic device, which can convert the optical signal into an electric cherry blossom ruining signal, so as to record the residual information of **. The image sensor of a CCD camera is a grid of transistors, each of which captures light and converts it into an electrical signal.

These electrical signals are sent to:

Hello, I am glad to serve you with a bumper and give you the following answers: The reason why the CCD camera reads out is because CCD (chargecoupleddevice) is an electronic device, which can convert optical signals into electrical signals to record the information. The advantage of the CCD camera is that it can convert the optical signal into an electrical signal, so as to record the best information, and its conversion efficiency is much higher than that of the traditional camera. Furthermore.