I want to open a shop, assemble a computer, install surveillance

Then it must be registered as a sole proprietorship. The general steps are as follows: Step 1: Select the business site (need to have the real estate certificate and register the lease contract), lease management fee, stamp duty (from the owner), and the site needs to have the real estate certificate or the lease contract registered by the lease.

Step 2: Apply for a business license.

Go to the local industrial and commercial office for business registration. When applying for a business license, you need to bring a certificate of premises (lease contract or real estate certificate) and ID card.

Regarding the question of what kind of procedures you need to go through in addition to the self-employed business registration to open a clothing store, you must first determine how you will open a store.

Registration with the Industrial and Commercial Bureau With: ID card Lease contract of the shop, etc. Generally, 2 business names are prepared in case others preemptively use the registration fee, which varies from place to place, generally; 2) Within one month after obtaining the license, go to the tax bureau for tax registration and bring: ID card, license, etc.

It's not too difficult for small businesses in general.

Step 3: It is best to apply for fire approval.

Step 4: After obtaining the business license, it will be processed.

1. Approval and engraving of the official seal (about 80-300 yuan is required for engraving the seal).

2. Apply for the organization certificate.

3. Handle local tax registration (business tax, urban maintenance and construction tax, education surcharge.

5. Handle national tax registration (sales tax. Corporate income tax, personal income tax).

If you have capital, you can do it boldly, you won't learn slowly, you will do it, but this may not be very good for the reputation of the store, it is best to go to which computer repair shop to be an apprentice, as long as you are willing to learn, half a year will be anything, computer maintenance is very deep, shallow and shallow, depending on what level you want to go, think I am an ordinary computer technician a month is enough.

Industrial and commercial registration is a must, and rent, water and electricity are also indispensable.

You can go to the electronic city, buy two cameras, capture cards, and come back and install them yourself.

Accessories : BNC connector power supply.

How to install the surveillance camera:

1) Under the condition of meeting the requirements of the field of view of the monitoring target, its installation height: indoor ground clearance should not be lower; Outdoor ground clearance should not be lower.

2) The surveillance camera and its supporting devices, such as lenses, protective covers, brackets, wipers, etc., should be installed firmly, operated flexibly, and should be protected from vandalism and coordinated with the surrounding environment.

3) In the environment of strong electromagnetic interference, the installation of surveillance cameras should be isolated from the ground insulation.

4) The signal cable and power cable should be introduced separately, and the exposed part should be protected by a hose and not affect the rotation of the gimbal.

5) The surveillance camera in the elevator compartment should be installed on the left or right side above the compartment door, and can effectively monitor the facial features of the occupants in the elevator compartment.

PTZ, decoder installation:

1) The gimbal should be installed firmly and without shaking when turning.

2) Check whether the rotation angle range of the gimbal meets the requirements according to the technical conditions of the product and the system design requirements.

3) The decoder should be installed near the gimbal or in the ceiling (but there must be a manhole).

Surveillance camera control device installation:

1) The installation position of the console and cabinet (rack) should meet the design requirements, and the installation should be stable and firm, easy to operate and maintain. The net distance between the back and side of the cabinet frame and the wall should meet the maintenance requirements.

2) The installation of all terminal equipment such as control, display, and recording of surveillance cameras should be stable and easy to operate. Among them, the monitor (screen) should avoid direct external light, and when it is unavoidable, measures should be taken to avoid light. The equipment installed in the console and cabinet (rack) should have ventilation and heat dissipation measures, and the internal connectors should be firmly connected to the equipment*.

3) All cables in the control room should be arranged according to the installation position of the equipment and cable troughs and inlet holes, arranged and bundled neatly, numbered, and with permanent signs.

PCs with integrated graphics are not suitable for surveillance, but they will also work if you only have one or two cameras.

The number of cameras depends on the scene, or you can choose the number yourself.

If you don't need to wear the tube, directly lay the wire, if conditions permit, you can ask the camera seller or cable dealer to help you make the connector of the wire, go back and plug it in directly.

Another way: twisted pair transmission.

Camera ditto.

One network cable can support 4 cameras, and every two cores are connected to one camera.

Twisted pair cables are calculated in pairs, a camera needs a pair, the power supply is best to be wired separately, do not use the cable in the network cable to take the power supply, it is easy to fail.

Buy a camera and power supply 12V, add a hard disk, buy a monitoring capture card, install two cameras, you can buy a two-way capture card or a four-way capture card, in the purchase of ** line and power cord, basically enough.

This is as simple as changing the capture card to a new host and taking the disc that comes with the capture card for software installation.

If you install traditional monitoring, you should take into account the wiring such as power supply and network cables.

However, the arrival of the Zhiji Bo Neng camera has simplified the installation and monitoring of the store to a very simple point.

Take the Wame smart camera C31Pro as an example:

Considering only the power supply problem of C31Pro, C31Pro can be directly connected to the wireless network in the store, and the configuration is simple:

After the installation is completed, you can directly view the in-store monitoring through the mobile phone client, even at home**, only a mobile phone is required.

In addition, if you need to use a computer**, you can directly open the browser to log in to the official website of Hemu, log in and Mo, you can view, and you can also support split-screen viewing. There is no need to install the client, and the square stool is quick and round.