The computer is not good to shut down, and it is good that the computer is not turned off

The processor is a bit problematic, or overheated, with a long response time.

There are too many system loaders, too long response time, try to optimize the system with optimization software.

If you don't shut down for a long time, the computer has been in standby, at this time, part of the hardware of the computer is in normal working condition, and in the long run, you will be aware that the beam has great damage to the life of the hardware, especially the hard disk, power supply, etc. If the computer crashes due to poor heat dissipation, long-term power generation will accelerate the aging of the computer, and in serious cases, the computer will catch fire and burn out.

If the computer is not turned off for a long time, it is no problem to be in standby, but if the computer is touched, the hard disk will be constantly read and written, so the damage to the hard disk is also relatively large.

Not turning off the machine every day leads to a waste of power, because the computer is not turned off is in standby state, this state will also consume a certain amount of power, and shutting down can save power.

The first situation: the computer can not shut down normally, it may be that the computer is poisoned, the virus files are messing up, at this time, we might as well open the antivirus software in the computer to scan the whole disk, if the scanning time is very long, you can set up the automatic shutdown after the antivirus, you don't have to guard the computer. The second scenario:

If antivirus still doesn't solve the problem, we need to fix the configuration file.

Steps:

1.At the same time, press win+r to open the computer's running window, type regedit and click enter.

2.In the open registry window, let's turn the hkey-localmachine software Microsoft Windows CurrentVersion Policies in the left menu, click on the subordinate system folder, and then find shutdownwithoutlogon in the right window and double-click, in the pop-up settings window, modify the cardinality to hexadecimal, The numerical data is changed to 1

3.Next, enter and click Enter in the run window again, in the Group Policyr window that opens, in the left menu of User Configuration - Manage Templates, then find "Start Menu and Taskbar" in the right window, and double-click to open.

4.In the settings window that opens, we double-click on the right side to "Delete and block" shutdown", "Restart", "Sleep" and "Hibernation" commands are available in the "Start" menu", and then change the default state to "disabled" in the pop-up window of the source to change the default state to "disabled", click the OK button below to save the settings.

Press and hold the power start button of the chassis for more than 5 seconds. Shutdown.

It is possible to never shut down the computer, but doing so can easily affect the life of the computer, cause the computer to malfunction and waste electricity.

This is determined by the quality of the computer, the time and environment in which the computer works, and if the computer hardware is not damaged, the computer can theoretically be similar to a server to achieve long-term non-shutdown. But it is prone to the following:

1. If you don't turn off the machine every day, the computer will be in standby mode for a long time, and some of the hardware of the computer is in normal working condition, which will cause great damage to the life of the hardware in the long run, especially the hard disk, power supply, etc.

2. Not turning off the machine every day leads to a waste of power, because the computer is not shut down is in standby state, this state is in the case of power consumption, and shutting down can save power.

3. Ordinary computers are not designed for long-term operation, and if they are not shut down for a long time, the life span will definitely not be guaranteed. For new and old computers, if they are not shut down for a long time, there may be a problem in a short time, but the poor quality computer may fail if it has been running for a long time.

The standby feature allows you to return to your original working state without having to restart your computer. Standby mode can turn off monitors, hard disks, fans and other devices, so that the whole system is in a low energy consumption state, desktop standby power consumption is 15-17W, portable 7-10W. When you reuse your computer, just press any key, and it will quickly exit standby mode and return to exactly the working state it was in before standby.

If you don't use the computer in a short period of time, set the computer to standby mode, you can reduce the impact of the current on the whole machine due to frequent switching on and off, but after all, the standby is not to turn off the computer completely, and some are still active, so it is better to shut down the computer for a long time.

3. The more appropriate way is: do not use the computer within 20 minutes, do not move anything, 20 minutes - 1 hour can be used standby or dormant (sleep is more power-saving than standby), and turn off the computer for more than 1 hour, which not only saves power, but also is conducive to the maintenance of the computer.

Yes, but if you don't use it for a long time, turn off the display, and the display will display a surface for a long time, which is easy to cause local color cast.

Generally, there is nothing bad about the loss of the machine, but it is often not turned off, and the electricity is wasted! It is recommended to turn it off when not in use!

Sure that the computer is often turned on and off is harmful, the switch will produce ** current, which has an impact on electronic devices, if it is within a few hours, it is best not to switch on and off continuously. If the computer is turned on for more than 12 hours every day, it will be related to the hardware heat dissipation problem, and too hot will shorten the life of the hardware inside the host.

Frequent power on and off also has a greater impact on the computer.

It's best to turn off the computer for three or four hours a day, and if you want to rest, you should also take a break.

It's best not to leave it open 24 hours a day.

2.Click on "Image Settings" and right-click on the first option.

3.Click "Disable Device" and restart it.

If it doesn't work, press and hold the start button for 10 seconds to force the shutdown.

1;It may be that your computer does not have good heat dissipation, which affects the shutdown. 2: This may also happen if some software has conflicts with the system or other software.

Very troublesome problem.

Generally not good repair.

You open the Task Manager (Ctrl+Alt+del) like this--click Shutdown--The shutdown menu appears--Hold Ctrl--Click Shutdown in the menu.

You can use antivirus software to check for viruses first, and if it doesn't work, restore the system or reinstall the system!

It's possible that there is a program running that hasn't been shut down, and if it happens often or every time, it's a problem with the system, and the system is redone.

Press and hold the power off button for 8 seconds I'm like that.

I don't know if your problem has been solved.,But I've always encountered a situation where I can't shut down these days.,Always show the shutdown screen.,But you can't shut down.,Numlock key Capslock key has responded.,I found a lot of solutions on the Internet are not working.,So I locked the target on the installed software.,When I want to shut down.,I glanced at the explorer.,And the 360 process manager.,There's a QQ manager process in it (found in the 360 process manager, I installed QQ Manager in order to upgrade the day), and then click off but can't close, which proves why the computer can't be turned off, the system can't close a process of QQ Manager, and then I uninstall QQ Manager, and the miracle appears The computer can shut down normally, and within 30 seconds, I hope it can help you a little. At least that's what I am.

Hello. I can't turn off my computer today either. I've killed it with 360 antivirus,,Physical examination.。。

360's artificial master helped. No, in the end, I did it myself. The first step is to start --- the program--- xp maintenance toolexe--- computer optimization settings, select xp system problem, completely repair the --- point...

Step 2--- Other Comprehensive Settings--- Service Optimization, Select Restore Window XP Default System Service -- Point Execution... The third step is to start --- program--- installation tool, and find the timer shutdown hangar. Set the time to shut down...

Wait for it to turn off. Then manually power on, you can now go to the point of restart, or point to shut down is normal. Forget to adopt ...

Shutdown and restart failure.

The fault is Windows

XP operating system shutdown failures are the most likely failures. The fault may be caused by the following reasons:

1) The system settings are adding to the chaos.

windows

XP automatically restarts by default when there is an error in the system, so that when the user shuts down, the computer will be restarted if there is an error in the system during the shutdown process. Disabling this feature often resolves the problem of auto-restart.

Right-click "My Computer" on the desktop, select "Properties" in the pop-up right-click menu, pop up the "System Properties" window, click the "Advanced" tab, click the "Settings" button in the "Startup and Failback" column, and the "Startup and Failback" window will pop up. In the "System Failure" column, remove the checkmark before the "Auto Restart" option and click the "OK" button.

2) Advanced power management in trick-or-treating.

As we all know, shutdown is closely related to power management, and the cause of shutdown failure is likely to be caused by poor system support from power management.

Click "Start Settings Control Panel Performance & Maintenance Power Options", and in the pop-up window, enable or disable "Advanced Power Support" as needed. If you're using Advanced Power Support enabled when a failure occurs, try to disable it, and if you are using Advanced Power Support to disable it when a failure occurs, the failure will often be resolved.