How to flash Samsung S5830?

Step 1: Turn off the phone, hold the phone in your right hand, press and hold the home button (the physical button at the bottom of the screen) with your right thumb, press and hold the power button with the middle finger of your left hand, and let go when the samsung appears, you will see several rows of blue English options, as shown below:

Step 2: Use the volume keys to select the third option Wipe Data Factory Reset (this is the factory reset) as shown below: [Press the home button to confirm, and then go to another screen, as shown in the figure below Step 3, after the second step press home to confirm, the screen will go to the options you saw when you operated in the original first step, and use the volume keys to select the fourth option wipe cache partition (this is the meaning of clearing the cache), You'll then be taken to the options you saw in the first step, as shown below

Step 4: Use the volume button to select the first option "Reboot System Now" (which means reboot the system), and the phone will automatically restart. It takes a long time, about 3 to 4 minutes, until the phone is turned on and turned off again.

Note: In fact, this step does not need to wait for the phone to automatically restart so troublesome, you can press home when the phone restarts immediately enter the fifth step to enter the flash mode, but I am used to waiting for the phone to restart, it depends on whether you have the patience to wait for a long restart) Step 5: Press and hold the power and home button and the volume, then it will start to enter the flash mode as shown below:

The first brush: the Bank of China, the Hong Kong Bank and the European version of the rom flash: after completing the above five steps, connect the data cable to the computer and mobile phone:

One: Open the flashing tool on the computer and take a closer look at the following figure: Second, start to put the flashing package:

Correspondence: ops--the suffix is the ops file; boot--- file name with aboot: phone--file with modem in file:

Remember to read it a few more times, otherwise it will be difficult to get the wrong bag, click start after making sure it is correct, and start flashing: Three: The flashing machine will be carried out in the following order:

Picture 1 Screen 2 Screen 3: At this time, your phone is about to restart Screen 4 Final screen This screen appears, congratulations on your successful flash! Second brush:

Asia-Pacific Edition: The first five steps of brushing the Asia-Pacific version are the same, but there are some differences in putting the bag: One:

Flash the tool to enter: Second, put the package order to see if there is no error, click start to start brushing: wait for five minutes and twenty-three seconds to appear The pass will be successful!

Samsung S5830 flashing is not difficult, deep.

Method Steps:

2. After installation, plug in the mobile phone and install the mobile phone driver according to the software system prompts.

3. After the phone driver is completed, open Samsung Kies and click "Tools" to automatically detect whether there is a new system in the mobile phone system, if there is a new version of the system, just click "Upgrade" The software will automatically upgrade the system for your mobile phone. This process can take a long time, so don't turn off your phone or play with it until the upgrade is complete, and don't disconnect it.

4、The last way is to go to the major Android forums to see if there is a Samsung S5830i flash package,If there is, you can flash the machine directly,The premise is that you have to learn to flash the machine,Of course, there are tutorials on the Internet。

3. Send it to the Samsung service center for upgrade: Bring the purchase invoice, repair card and machine to the Samsung service center, and the professional after-sales engineer will help you upgrade.

Flashing, there are a lot of flashing software on the Internet, and it is risky to brush yourself, so find skilled people to brush.