When the ceiling lamp in the living room is dirty, what are the cleaning methods for the ceiling lam

The LED ceiling light in the living room has become the "pillar" of a home, but it also has times when it is dirty and needs to be cleaned and maintained. Since different kinds of LED ceiling lights have different shapes, it is troublesome to clean. Here are a few tips for the maintenance of ceiling lamps.

When installing LED ceiling lights, it should be considered that although the LED ceiling lights are close to the ceiling, some electromagnetic reactions will still absorb dust in the air when the lights are turned on. Lights can also attract mosquitoes to fly into the lampshade, so remember to keep your home clean and clean your lamps as often as possible to prevent them from getting dimmed. The lamps should be checked regularly, and if the lamp feet are in poor contact or the starter is loose, it should be reinstalled and adjusted in time.

When installing LED ceiling lights, it is necessary to take into account the roof situation of the home, if it is a masonry roof, it is necessary to use embedded bolts, or use expansion bolts, nylon plugs, plastic plugs, etc. to fix, not to use wooden wedges. Usually do not hang too many decorations on the lamps, otherwise it will fall down and hurt people if it exceeds the bearing capacity.

Cleaning the lampshade can be done depending on the material. If it is glass, you can scrub it carefully with a small soft cloth or clean it with some toothpaste.

If it is a crystal lampshade, it can be cleaned with a neutral detergent. To clean the dirt on the lamp holder, you can remove the dust on the surface first, and then wipe it with a cotton cloth dipped in toothpaste, so as not to let the moisture stay on the lamp holder.

When scrubbing the LED ceiling lamp, you should use light-colored cotton socks or cotton gloves on your hands, gently wipe the lamp, and do not move the parts in the lamp at will. If you want to clean the ceiling lamp by yourself, you must have two people to cooperate, turn off the power first, and be careful not to wipe the lamp holder with a wet cloth, which is easy to cause leakage.

If it is a crystal lampshade, you can wash it with a neutral detergent and gently wipe the lamp.

It depends on the material. If it is glass, it can be carefully scrubbed with a small soft cloth.

Different ceiling lamps have different cleaning methods, which can be gently wiped with a detergent.

You can find a ladder to wipe it by hand, or you can let the cleaning wipe method is the only one.

There are also times when the ceiling lamp in the living room is dirty, and the cleaning method of the ceiling lamp in the living room is to hire a special cleaner.

Generally, when the breathing lamp in the living room is dirty, we remove it and scrub it.

If there is poor contact or loose starter, it should be reinstalled and adjusted in time.

Ceiling lamp is one of the more common types of lamps and lanterns in decoration, the shape of the ceiling lamp is beautiful, is an important decorative product in home life. The ceiling lamp is different from the traditional lamps, which can be simple and generous, luxurious and fashionable, and is also colorful in shape, so it is also loved by the majority of consumers. The ceiling lamp is easy to accumulate dust after a long time, and if you don't pay attention to daily cleaning, it will also damage the beauty.

Many people only know how to buy ceiling lights, but they don't know how to clean them. The following is a brief explanation of the tips for cleaning ceiling lights, I hope it can help you.

1. Clean the lampholder.

The dirt on the lamp holder can be removed first, and then wiped with a cotton cloth dipped in toothpaste. Be careful not to allow moisture to remain on the lamp holder. If it is a crystal ceiling lamp, it needs to maintain a specific ambient temperature in the room, and too high or too low temperature will also affect its lifespan.

Second, the lampshade is cleaned.

For cloth lampshades, first use a small vacuum cleaner to suck off the surface dust, and then pour some dish soap to scrub; The frosted glass lampshade is cleaned with a soft cloth dipped in toothpaste, and the dirt on the uneven places can be treated with a toothpick wrapped in a soft cloth; After removing the dirt on the metal lampholder, squeeze a little toothpaste on the cotton cloth to scrub it.

3. Ballast cleaning.

The ballast is one of the important components of the ceiling lamp, if it is stained with dust, it will affect the heat dissipation, resulting in the service life of the parts being disturbed and shortened, and the effect of the ceiling lamp will be weakened. Therefore, when maintaining ceiling lamps, it is necessary to regularly check whether they are vertical and dirty, and if they are dirty, they should be checked, and if they are completely flat backlit design, there is no need to consider this problem.

Clean the ceiling lamp regularly.

Use a soft cloth or latex cotton to gently wipe the fixture.

Avoid soaking or rinsing ceiling lamps with water.

Avoid using detergents with corrosive substances.

Regularly inspect and replace aging ceiling light wiring harnesses.

The living room is an important place for leisure, so its decoration will greatly affect the guests' views on your entire aesthetic taste and home taste. The ceiling lamp in the living room is a very good choice, and I will introduce the key points of installation and maintenance of the ceiling lamp in the living room.

First, the main points of installation of ceiling lamps in the living room.

1. Punch holes in the cement ceiling of the kitchen first, and then knock the plastic anchor into the ceiling hole (if it is a suspended ceiling, the ceiling plate can be fixed directly on the ceiling with screws).

2. Connect the power test lamp, remove the test lamp line after normal operation, connect the power cord to the position of the original test lamp line of the ceiling plate, ensure that the power cord is effectively connected, and pay attention to distinguishing the zero and live wire.

3. Put the flat pad on the screw, and the screw is screwed clockwise through the hole of the ground into the plastic cko tightening suction top plate.

4. Buckle the lampshade onto the ceiling plate, rotate the lampshade clockwise, and fix the lampshade on the ceiling plate.

Second, the living room ceiling lamp maintenance.

1. You need to remember that after buying back the lamps, don't be busy installing them first, you should carefully look at the marks of the lamps and lanterns and read the installation and use of the imitation sheet, and then install and use the lamps according to the rules of the imitation sheet, otherwise there may be risks.

2. Replace the aging lamp in time according to the light source parameters supplied by the sign, and when it is found that the two ends of the lamp are red, the lamp is black or has a black shadow, and the lamp does not light up, the lamp should be replaced in time to prevent the ballast from burning out and other unsatisfactory phenomena;

3. Be careful not to change the structure of the lamps and lanterns during clean maintenance, and do not change the parts of the lamps at will. 4. Try not to switch on and off again when using LED lamps, which will greatly shorten the service life of LED lighting.

When choosing a living room ceiling lamp, you should also pay attention to the harmony of its style and overall home style, shop around, carefully understand the brand of living room ceiling lamp and its services, if you have more questions about living room ceiling lamps or other decoration categories, welcome to enter Fuwo Home Improvement Network, we will provide you with more detailed information.

To clean and maintain regularly, generally use light-colored cotton socks or cotton gloves on your hands, gently wipe the lamps, and do not move the parts in the lamps at will. The cleaning of the lampshade can be carried out according to the material, the glass should be cleaned with a small soft cloth, and the crystal lampshade can be cleaned with a neutral detergent. (Yimei Lighting reminds you that you must turn off the power before cleaning the lamp, and be careful not to wipe the lamp holder with a damp cloth, which is easy to cause leakage.)

> diagram.

Hello, generally speaking, ceiling lamps are not very easy to maintain. You can use a rag to gently wipe the surface of the ceiling lamp. If it is a more expensive ceiling lamp, it is recommended to consult the merchant.

1. Because the LED ceiling lamp is hung in a high place, it is easy to be damaged if you are not careful, so when disassembling the lampshade, try to cooperate with two people. Before disassembly, turn off the power and do not scrub the lamp holder with a damp rag to prevent leakage.

2. When cleaning the LED ceiling lamp shade, it should be cleaned according to the different materials of the ceiling lamp shade.

cloth lampshade, first use a small vacuum cleaner to suck off the surface dust, and then pour some dish soap to scrub; If the inside of the lampshade is a paper material, you should avoid using detergent directly to prevent damage, and wipe it with a dry cloth; The frosted glass lampshade is cleaned with a soft cloth dipped in toothpaste, and the dirt on the uneven places can be treated with a toothpick wrapped in a soft cloth;

3. When cleaning the dirt on the lamp holder, you can remove the dust on the surface first, and then wipe it with a cotton cloth dipped in toothpaste, do not let the water stay on the lamp holder to prevent electricity leakage.

4. When scrubbing the LED ceiling lamp, you should use light-colored old cotton socks or old cotton gloves on your hands, gently wipe the lamp, and do not move the parts in the lamp at will. After cleaning, the lamp should be installed as it is, and remember not to miss or install the wrong parts.

For the maintenance of LED ceiling lamps, it is necessary to pay attention to the fact that when you first buy them, you should read the instructions before installing the lamps; If the two ends of the lamp are found to be red or black, the lamp should be replaced in time; The structure and components of the lamp cannot be changed during cleaning and maintenance; Try not to press the switch repeatedly. The specific maintenance items are as follows:

1. After the lamps are purchased, don't be busy with the installation, first of all, you should carefully look at the marks of the lamps and lanterns and read the installation instructions carefully, and then install and use the lamps and lanterns according to the standards, so that it is safer.

2. After using it for a long time, if you find that the lamp is red or black at both ends, or there is a black shadow, and the lamp does not light up, try to replace the lamp in time to prevent the ballast from burning out.

3. During cleaning and maintenance, it is necessary to pay attention not to change the structure of the lamps and lanterns, nor to change the parts of the lamps, and after the maintenance is completed, the lamps should be reinstalled according to the original appearance, and remember not to miss or install the lamps and lanterns by mistake.

4. In the process of using LED lamps, pay attention not to press the switch repeatedly, and too frequent use will also shorten the service life of LED lighting.

Before cleaning the ceiling lamp, be sure to turn off the power first, and do not scrub the lamp holder with a wet rag, otherwise it is easy to cause the risk of electric shock. The most popular acrylic lampshade can be gently brushed off with a soft cloth first, and then carefully wiped with a clean rag. Like the ceiling lamp of Yimei Lighting, the acrylic lampshade is easier to take care of, and it will not turn yellow for 10 years.