Where to add Dongfeng Fengxing World car glass water?

Car glass water needs to be added at the glass kettle filling port of the car, located in the engine compartment of the car, is a blue lid, white kettle body thing, no scale, just fill up, the specific operation steps are as follows: 1. Open the door on this side of the cab. 2. Pull the hood switch on the left side of the driver's leg.

3. Lift up the hood of the engine. Fourth, the hood supported by a support rod to ensure that the support is firm to avoid danger. 5. Add glass water until it is filled.

Add a glass of water. The entrance, under the hood, opens the hood and you can see that there is a small blue cover, and many models are on the right side.

Hello, find the glass kettle, just add it to it. The lid is generally blue with markings.

Open the engine compartment cover, in the yellow circle pointed by the arrow in the picture below, there is a late ruler with a lid with a yard smile plastic pot tube, open the lid to fill the glass cleaning liquid. Illustration of the cautious -

Hello, I'm glad to serve you, I will immediately inquire about the relevant information for you, because typing and access to the need for Pidan, please wait patiently for me for five minutes, see this message do not have to reply, to be sent to you immediately round wide, thank you for your cooperation and support

Glass water is added to the glass kettle in the engine compartment. Generally, there is a fan-shaped pattern on the lid of the glass kettle, which is similar to the wiper icon, which is the entrance to add glass water, and you can open the lid and add glass water directly. Glass water is the common name of automobile windshield cleaning liquid, which has the functions of wetting, penetration, solubilization, etc., so as to play the role of cleaning and decontamination of automobile glass.

Most of the contributors' vehicles have a glass kettle in the engine compartment, and a few models may be located on the side of the engine compartment or fog lights. The way to add it is: open the engine compartment, find the blue icon with the wiper and the water cover is the glass kettle, open the lid and add it directly.

Generally, there is a glass water level indicator on the instrument of the car, if the glass water is about to run out of gear, this light will start to flash and flash, which tells us that it is time to add glass water.

If you have no other questions about this problem, please click "End Service" in the upper right corner and give Nezhao and like. Click on the avatar to follow me, and if you still have car-related problems in the future, you can directly consult me. At the same time, thank you for your support and trust in the platform, if you have any follow-up questions, please feel free to contact me, I will do my best to serve you, I wish you a happy life. 

Hello Open the engine compartment cover, in the position of the yellow circle of the dead chain pointed by the arrow in the picture below, there is a plastic pot tube with a lid, open the lid to fill the stupid rental glass with trillion cleaning liquid. Example diagram –

Open the front lid, there is a lid with the letters Waters written on the left hand side, open it and add water to it, then close it tightly, and you're done!

Lift the wiper towards the steering wheel (i.e. upward) and the water will come out, and this is when it rains. Generally, you can move the lever on the right hand side of the steering wheel in your direction. However, some cars with a pocket gear have a paddle on the lower right.

The wiper blades of the car are used to refresh the raindrops on the surface of the glass when it rains, so that the car driver can have a clear and open vision. Driving safety is of paramount importance to drivers, and car wiper blades can reduce the rate of traffic accidents and ensure people's safety.

How to use wiper blades correctly.

1. Ensure that there is water on the surface of the front windshield The wiping part of the car wiper blade is made of natural rubber material, and wiping it under the condition that the front windshield is very dry will scratch the rubber surface due to excessive friction, which will affect the wiping effect, so it is necessary to ensure that the front windshield surface is watery before using the car wiper.

2. Clean up the adhesive strips on the wiper strip and the glass surface in time The impurities attached to the glass surface and the wiper strip need to be cleaned up before the work of the automobile wiper, because these impurities will increase the friction between the rubber strip and the glass when the wiper is working, so as to block the rubber or scratch the glass surface, and the phenomenon of unclear scratching occurs.

3. Stand up the wiper blades when parking, and stand up the wiper blades when parking, so that the rubber strip and the glass surface do not come into contact, especially when the car is not used for a long time, it is necessary to erect the wiper blades, and the dust and impurities will fall between the rubber strip and the glass surface when parking, and when the wipers are used, these dust and impurities will rub and scratch the rubber strip or glass surface, thus affecting the wiping effect; When the car is stopped, a lot of heat energy evaporates from the hood between the windshield and the windshield, and if the wiper blades are not upright, the wiper blades will deteriorate faster.

4. Daily cleaning of the glass surface When washing the car daily, it is necessary to clean up the oil stains or dirt attached to the surface of the front windshield, so that the surface of the front windshield is clean and free of attachments, otherwise, the oil stains or dirt attached to the surface of the front windshield will cause the wiper blades to jump and make a sound during the scraping process.

5. Avoid chemical erosion, such as glass water and other chemicals will erode the rubber strip and accelerate the aging of the rubber strip, so the front windshield should try not to use chemical scrubbing, even if it is used, it is also necessary to pay attention not to let the chemical substances contact with the rubber strip.

It is recommended that the 4S shop go to the inspection or the big repair shop to check the specific fault.

The type of glass water, the glass water currently on the market is more commonly used in the summer type, this glass water is added with shellac ingredients, which can remove flying insects and gums on the windshield; There is also a freeze-proof glass water designed for winter, which can be used when the outdoor temperature is below minus 20 to 35 degrees Celsius, and will not condense or freeze the pipes; Glass water action, 1. Functional effect. That is, cleaning and lubrication. 2. Protection.

The main thing is anti-freeze and anti-fog.

Of course, you can make your own glass of water. In the south, tap water with dish soap or hand sanitizer for washing hands will do. If you are particular about it, you should use pure water, and if you are particular about it, you should use distilled water.

If you want to prevent freezing in winter, add some alcohol, generally use industrial alcohol or liquor, and pay attention to medical alcohol.

Hello, it is recommended to buy glass water in the season, there are two kinds of defrosting and degumming in summer [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello , you can tap water Then add some laundry detergent These can be 2-3 drops can be mineral water can also [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, it is not possible to match it yourself, it is recommended that you go to the auto supply store to buy special glass water, I hope my answer will help you. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

It's okay to get some dish soap [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Can accompany [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

How to make your own car glass water.