What should I do if Tianyu mobile phone M610 always shuts down automatically? Always auto shutdown,

Simple analysis of Tianyu mobile phone automatic shutdown;

1. Caused by oxidation of the antennae of the mobile phone battery, the mobile phone will automatically shut down when it vibrates slightly, which is a slight fault, and the oxide can be treated and the battery antennae can be corrected.

2. Caused by the oxidation of the mobile phone motherboard chip, it is a CPU failure, and it is necessary to deal with the PCB motherboard welding process.

3. For new mobile phones, the mobile phone will also automatically shut down under static conditions, which is a software failure, and the mobile phone program can be handled.

Hello, according to the situation you described:

1.It is recommended to try to power on and off again.

2.It is recommended to try to replace the battery with a reseat attempt.

3.Whether the phone has enough power.

4.If your phone can operate normally, it is recommended that you back up the personal information in your phone in advance to avoid data loss, restore factory settings, and try.

5.If it is still unavailable, it is recommended to contact the Tianyu after-sales service center, the address of the Tianyu national after-sales service center.

Two days ago, as long as the mobile phone is placed in the trouser pocket, it will automatically turn off, and today when you put it in the trouser pocket for a while, you will buy parallel goods.

I also bought one, there is no such thing, but the electricity is not fast, but there is, maybe the battery contact is not good.

Hello, this should be a problem with your battery.

The reasons why Tianyu mobile phones often turn off automatically are:

1. Loose contact points of mobile phone batteries lead to poor contact;

2. There is damage to the mobile phone system or motherboard.

If the mobile phone is often automatically shut down for no reason, it is necessary to take into account the following points to solve the problem:

1. The connection between the mobile phone battery and the mobile phone contact is loose, resulting in poor contact, you can take the method of adding some things to fix the battery, so that the battery and the contact are fully in contact or the surrounding fixed points are welded from the new;

2. If the mobile phone is used for too long and the battery is aging, it will also occur in this situation, replace a new battery;

3. If there is a problem with the mobile phone system, it will automatically shut down frequently, restore the mobile phone to factory settings, and all of it will be cleared;

4. If there is a problem with the motherboard of the mobile phone, then you need to prepare the relevant information of the mobile phone to be sent for professional maintenance.

Software failure, go to flash the machine to upgrade. Less than one year of free customer service warranty. If the warranty period is over, it is cheaper to go to a repair shop.

Forty or fifty dollars is enough.

It may be a problem with the motherboard or cable of the mobile phone, or there is dust at the contact point of your mobile phone sim, and if the contact is not good, it will automatically shut down and then automatically turn on.

Is it when you use UC to surf the Internet or read an e-book, it suddenly restarts automatically? This is actually the problem of insufficient memory for the fuselage to process transactions, even Samsung, Nokia will have a solution to this situation: read less e-books, less Internet, often empty the cookies of the UC browser, restart it by itself, and do not give it the opportunity to restart by itself to change a good mobile phone.

Hello, may I ask what model of mobile phone you are using, if there is a crash phenomenon during the normal operation of the mobile phone menu, whether the operation is too fast, or you check whether it is a compatibility problem of third-party software, whether there are too many programs opened, it is recommended to close the background program for trial. If you still have questions, it is recommended that you contact your local after-sales service for you to check.

The address of Tianyu National After-sales Service Center.

There are several cases when the phone automatically shuts down: 1The connection between the mobile phone battery and the mobile phone contacts is loose or poorly connected, if it is loose, you can take the method of adding something to fix the battery and let the battery and the contacts fully contact; If the contact is bad, you can use a home toothbrush with a little alcohol and wash it back and forth between the contacts of the battery and the contacts of the phone.

2.The battery is aging, if the battery is used for too long, there is also this possibility, the way to detect it is to try to change a battery, if the problem is solved, OK, you can only change the battery, the problem is still there, then it may be a problem with the mobile phone 3. If it is a mobile phone problem, then there are only two possibilities, one is the motherboard, the other is the software, the motherboard problem can only be repaired, the software problem can be solved by flashing, no need to disassemble and repair.

1. Please confirm whether the power button has been touched by mistake. Press and hold the power button for more than 10 seconds, and the phone will shut down and restart.

2. Keep your phone fully charged. The battery will automatically shut down when it is low to a certain extent.

3. Check whether the timer switch function is turned on.

4. The electronic components of the mobile phone motherboard fail, resulting in the power supply not being on the line, which will cause the mobile phone to shut down automatically.

Hello, according to your description about the hand always dead suggests you the following operation:

1. Crash when operating any function.

2. If there is a crash phenomenon during the normal operation of the mobile phone menu, whether the operation is too fast.

3. Check whether it is a compatibility problem of third-party software, whether there are too many open programs, and it is recommended to close the background program for trial.

4. It is recommended to use the application center of the Anzhi market in the mobile phone ** third-party application, if through other channels ** it is recommended that the mobile phone regularly check and kill viruses, optimize the mobile phone memory, and clear the cache for trial.

5. The above methods are still not working normally, it is recommended to restore the backup data to factory settings.

6. If it still can't be solved, it is recommended that you send it to Tianyu after-sales service center for testing, and the address of Tianyu national after-sales service center.

Hello, 1, first see what function you are operating to automatically shut down, if it is a third-party software, it may be that this software is not compatible with the phone, you can try it after deleting it.

2. If your mobile phone will automatically shut down when you operate any function, it is recommended that you often close the background running program during the use of your mobile phone, because if too much software is running in the background, the system will run badly, which will easily lead to automatic shutdown.

3. You can check whether your mobile phone battery is a little loose, and you can try to pad a small piece of paper.

4. If it doesn't work, it is recommended that you consider backing up your phone data, and then try it after restoring it to factory settings.

5. If none of the above methods can be solved, it is recommended that you contact the local after-sales service center directly to help you solve the problem of your mobile phone.

If the battery is in poor contact, go to the repair shop and take a look.

I also bought the w619 and it will arrive tomorrow. I didn't let the shopkeeper swipe Android. Did you let me brush Android?!

It may be that there is a problem with their flashing bag, just brush it yourself. I don't know if it's a cloud system, but you can also try flashing it. I haven't used w619, so it's hard to say.

This phone has just come out, there should be no refurbished machine.

It's the reason why the battery is loose A thin piece of paper is placed at the junction between the battery and the back shell of the mobile phone But I think the quality of Tianyu's machine is not very good I hope you can solve the problem quickly Otherwise, just change it to a good one...

Flashed? Poor battery contact? Or something else?

Well, it should be a battery!

If this is still the case after changing the battery, it is a problem with the battery interface.

Not a big deal.

There are many kinds of problems, there are hardware problems, there are software problems, hardware is a good solution, the software can try to factory reset.

Hello, this should be a problem with the battery.

The battery has a virtual charge, and it will be out of power as soon as it is connected.

The contact points between the battery and the circuit board are worn, it is recommended to wipe them with an eraser, and if it doesn't work, you have to replace the battery.

Hello, according to the situation you described:

1.It is recommended that you try to switch it on and off again.

2.Try reinserting the battery.

3.If your phone can operate normally, it is recommended that you back up the personal information in your phone in advance to avoid data loss, restore factory settings, and try.

4.If there is still a problem after trying the above methods, it is recommended to go to the repair station to test the mobile phone, and it is recommended to contact the Tianyu after-sales service center, the address of the Tianyu national after-sales service center.

The program is wrong, go to the after-sales service to write the program!

Obviously, there is a problem with the wiring.

Program problems, can't read the sim card to write the program.

Minor issues. Remove the SIM card and restore the factory settings and you're good to go.

Initial password 1122