Why does the computer automatically turn on after the driver is updated, and the screen becomes so b

Your resolution is too low, just adjust it, if the maximum is only 800 600, then there is a problem with the graphics card driver and you need to reinstall.

How to adjust the resolution.

Method 1, this is the most conventional method: right-click on the blank space of the desktop, select "Properties" - "Settings", there is a "screen resolution" at the bottom left of the window of the setting tab, drag the control block to the left and right to change the resolution of the screen (pay attention to the number below each drag), and you can click "OK" after confirming a certain resolution value.

Method 2: (Take Intel graphics card as an example) right-click on the blank space of the desktop, select "Display Mode" - "True Color" - "1024 * 768" (select here according to your needs, but it is not recommended to be too high), etc.;

Method 3: (Take Intel graphics card as an example) right-click on the blank space of the desktop, select "Properties" - "Settings", there is a "Advanced" - "Adapter" - "All Modes" at the bottom right of the window of the settings tab, and select a suitable combination of modes (pay special attention not to choose too high refresh rate Hertz number).

What to do if you can't adjust the resolution.

The general display resolution can be adjusted, at least there will be 2-3 adjustment space, if you don't let the adjustment is mostly a problem with the graphics card driver, or in safe mode.

If it is in safe mode, you can choose to restart, press F8 to select "Last Correct Configuration", and enter the normal desktop; If it is a normal startup, you can consider whether the graphics card driver is faulty, at this point, you can check whether there is an exclamation mark and question mark in front of the graphics card project by right-clicking "My Computer" - "Properties" - "Hardware" - "Device Manager" to determine whether it is a problem with the graphics card driver, if there is, reinstall the graphics card driver, if you are not clear about the model of the graphics card, you can use the "driver wizard" to help you find the right graphics card driver.

Adjust the resolution to the black screen.

Adjusting the resolution of the black screen is often due to the combination of too high resolution and too high refresh rate, for example, the display mode of 1024*768 75hz is normal, but 1280*960 75hz may cause a black screen, maybe you will say that I did not adjust the refresh rate (75hz), but this combination may make the display unbearable (especially the 15-inch display), so reducing the resolution or reducing the refresh rate are ways to solve the black screen caused by adjustment.

The solution is to select Reboot as mentioned above, press F8 to select "Last Correct Configuration", or start the safe mode once (press F8 to enter safe mode) to automatically fix it, and then reboot.

It is estimated that there is a problem with your driver, and it is recommended to uninstall and reinstall.

Press Alt+F4 to close all windows and reset the resolution of the graphics card.

It may be the reason why the computer resolution is not in tune.

Under normal circumstances, the driver is not updated manually after installation, it is not automatically updated, unless the computer detects that there is a driver installed every time it is turned on.

There was a conflict, and he was deleted.

First, the driver may not be installed, and secondly, it may have been installed, but the resolution is not set, and the reboot is not, and the driver is better not to be updated at will.

Install back the original driver, this driver may not be compatible, it is recommended not to use the driver wizard, drive life and other software update drivers. The drivers of these software updates have not undergone any testing, and they are responsible for any consequences that occur.

Driver Life has helped you update the graphics card driver.

What is called driver update, is to replace the old one with a new driver.

Normally, the old settings are saved.

This time it may be due to the fact that the driver is loaded with another driver, or the driver version is too different and the data is not compatible.

Anyway, it's the previous setting.

Naturally, the resolution becomes the default 800*600, you go to the attribute --- effect--- adjust the resolution in the advanced, adjust it to 1024*768, it's almost.

There must be other settings that have been reset, so take your time.

As for installing the original driver back, I don't know if the original settings are still there, so it's okay to try it.

Resolution: Right mouse button.

properties you adjust to the following resolution.

The graphics card driver update failed, so let's go to the official website by yourself.

Hello, according to the phenomenon you described, the noise may be caused by the following reasons, you can refer to the following tips for relevant processing, I hope mine is helpful to you!

Cause Analysis]:

Icons and images may be displayed in the wrong proportion, and the position may be shifted due to resolution issues.

Solution:]:

2.If you can't adjust it properly, we recommend that you install "360 Driver Master" or "Driver Life" and install and upgrade the graphics card driver.

If the graphics card driver does not match or the reinstallation is not completed, you need to manually reinstall it again.

When many tools are applied, the first step is to remove the old one, restart it, and then automatically install the new one. Sometimes due to various accidents, especially some antivirus software, it will ask you to confirm whether the autorun items are added to the startup bar once, if you accidentally select no, the next reboot will not install a new one, you have to manually reinstall the driver. This type of installation is called incorrect, and if you try it a few times, your knowledge of the computer will go up to the next level.

Another reason is that the new driver does not support your graphics card or the new driver has some special features, your graphics card is no longer supported, and the latest driver may sometimes contain bugs, which is also a common phenomenon, for example, Microsoft often releases patches, and some patches will cause new problems, which is called the child of the vulnerability. Therefore, the latest is not necessarily the best, but the most stable is the best.

Finally, it is recommended that when the hardware installation is completed and it feels normal, the driver will be backed up, and no more upgrades will be made.

The graphics card driver is not installed well, you try to use the driver life to install it manually, if it doesn't work, you can choose other versions of the driver for manual installation, you can try.

Generally speaking, the driver search software can find most of the suitable computer hardware drivers, but when the software driver is used, it is not necessarily recommended that the computer hardware match the program. This has caused such a situation, that is, after installing the driver, the motherboard program part does not match (the device manager is displayed well, in fact, the screen has color difference, there is no sound, etc.), when the mismatched part of the function is enabled, the computer will even blue screen of death. The easiest solution is to re-select the right driver.

Try using other driver software to update the graphics card drivers and motherboard drivers.

It must be the driver of the driver who has updated the graphics card, and there is no way for you to redo the system!

Graphics card driver problem Uninstall the graphics card driver and reinstall it.