Who has any good way to make their own welding masks!

There's a head-worn mask! This is what is used when operating TIG welding, because one hand holds the welding torch and the other hand holds the welding wire.

The welding mask is a tool that protects the safety of workers in welding and cutting operations.

The role of the welding mask:

1.Eye protection: double light filtering to avoid harmful ultraviolet and infrared radiation caused by arcing, as well as eye damage caused by strong welding light, and prevent the occurrence of electro-optic ophthalmia.

2.Face protection: Effectively prevent the damage caused by splashes and harmful bodies to the face during operation, and reduce the occurrence of burns.

3.Respiratory protection: airflow guidance, effectively reduce the harmful gases and dust released by welding to the body, and prevent the occurrence of pneumoconiosis occupational diseases.

Prevent damage to the human face caused by the radiation generated by the arc. At the same time, you can observe the welding status with your eyes.

Filtering out strong light and blocking radiation.

Hello, it is a pleasure to serve you and give you the following answers:1How to use an electrowelded head-mounted mask:

1) First of all, before using the electrowelded head-mounted mask, you should check the condition of the mask, make sure it is complete, and make sure that there is no damage to its connections. (2) Then, place the mask on the head and tie the headband around the head, making sure the mask fits snugly against the head to prevent heat and sparks from entering the eyes and face. (3) Finally, during the welding process, the condition of the mask should be checked frequently to ensure its integrity and ensure that there is no damage to its connections.

2.Causes of the problem: (1) The quality of the mask itself:

Due to the quality of the mask itself, it may cause damage to the connections of the mask, which can cause heat and sparks to enter the eyes and face. (2) Improper installation of the mask: If the mask is not installed properly, it may cause damage to the connections of the mask, which can cause heat and sparks to enter the eyes and face.

3.Solution and practice steps with elevation: (1) Check the quality of the mask:

Before using an electrowelded head-mounted mask, you should check the condition of the mask to ensure its integrity and make sure that there is no damage to its connections. (2) Install the mask correctly: Place the mask on the head and tie the headband to the head, making sure the mask fits snugly against the head to prevent heat and sparks from entering the eyes and face.

3) Check the mask regularly: During the welding process, the face should be checked frequently.

Ordinary face shields cannot be used as welding masks, as they can harm the eyes. It is the arc light, ultraviolet rays and infrared rays that are harmful to the eyes, and it is best for professional welders to use an automatic photoelectric welding mask.

The automatic variable photoelectric welding mask adopts special optical technology and solar energy technology, which converts the welding arc light generated during electric welding into an electrical signal, and controls the liquid crystal LCD lens to dim rapidly when the arc light appears, and the fork automatically recovers when the welding stops, which has the following characteristics:

1.It is suitable for all kinds of electric welding (including argon arc welding) and gas welding operations;

2.The lenses have an automatic dimming function. Prior to welding, the lenses are transparent and the operator can clearly weld the workpiece without having to remove the mask.

At the moment when the arc is generated, the lenses turn black, protecting the eyes from damage. When the arc disappears, the lens becomes transparent again, allowing direct observation of the welding. This feature of the automatic photoelectric welding mask avoids blind welding, prevents the occurrence of electro-optical eye disease, and also improves the welding quality and work efficiency;

3.The lens has the function of filtering infrared and ultraviolet rays, effectively protecting the eyes from infrared and ultraviolet radiation. Regardless of whether the lenses function automatically change light or not, the lenses provide the user with permanent protection against harmful ultraviolet and infrared rays during welding;

4.The mask can isolate ultraviolet and infrared rays and strong light, and prevent the face, face and neck from being damaged by welding arc light;

The main brands of automatic variable photoelectric welding masks abroad are 3M, Miller, Jackson, and Optrel, but the ** is relatively high. In fact, the domestic ones are very good, and the domestic ones, all of which have passed the CE certification, most of them are exported, the quality is very good, the ** is still low, there is no need to buy foreign brands.

Domestic brands, the early main ones are Yunnan Hengyu (Artotic), Tai'an Kexin (Assureweld), Nanjing Tekman (Tecmen), etc., in recent years, there have been some new manufacturers of automatic photoelectric welding masks, but the main technology and old manufacturers are similar.

Ordinary masks can be used outdoors during the day as an electric welding mask.

No, it doesn't block light well, in fact, there is now an automatic dimming mask, which is very easy to use.

Hello. The role of the welding mask. First of all, we all understand that the welding mask has a lens on it.

Then the role of this lens is to protect our eyes. This lens is available in shades, from size seven to size 14, and this one is chosen according to our current. So in addition to the lenses, the other parts are the ones we protect our face and the first to avoid damage, which is the damage of ultraviolet and infrared rays.

The arc light of electric welding will stab the eyes, and the falling welding slag will burn people, so it is necessary to do a good job of labor protection.

First, the way of use is different, the mask is head-mounted, and the hand-held mask is hand-held.

2. The head-mounted black glass protective mask and the hand-held welding mask are both fixed number of light shields, and the light shield number should be replaced according to current changes.

3. The head-mounted automatic dimming welding helmet is a dimming mirror group, which can adjust the shading level according to the current size, different brands, some welding helmet internal adjustment (3m, need to take off the welding helmet, adjust the shading number inside the welding helmet), and some welding helmet external adjustment (optrel, do not need to take off the welding helmet to adjust the shading number).

Adjustment knob on the outside of the mask.