Android 2 3 3 how to root ZTE v889d

I succeeded, let me tell you.

You first open the web page on the reference material, and then use his method to root it. If your root fails, and Bell Pepper shows that you succeeded, use the following method:

The bell pepper brush machine assistant is very face-saving, saying that it succeeded, and only it said that the root was successful. Then try to use this bell pepper assistant to flash the machine,That's to say, there are not many types of brushing,Choose one that I think looks more comfortable to start flashing,When the rom is brushed in,,It's already in the phone,And I have the permission of a superuser,And the system software bound to WOW is gone,The phone was formatted into a bare metal,And then I can install the previous software freely。

Warning: 1If Bell Pepper Brush Assistant shows that you don't have root access, try again to do it with a hammer.

2.Flashing the ROM requires formatting the phone, which means that the software and files installed in the system of ZTE V889D will be deleted, please transfer the files in the system memory to the SD card to avoid loss.

4.Flashing in a new ROM may reduce the phone's memory, which means that when optimizing with Phone Manager, you will find that it will always reach 70

Disadvantages: (For the time being, this article is more important) can no longer be displayed on the computer, which means that after installing the driver, open my computer, you will find that the removable hard disk area does not have your mobile phone display, so you can only use QQ mobile phone manager and other mobile phone assistant programs to modify the SD card file. But win7 and above systems are fine.

There are a lot of tutorials on the forum, very simple.

Try it with kingroot.,If it doesn't work, change the root tool.,Now there are many root tools on the Internet.。

You can go to the Android forums to see a lot.

With one key root can be permanent, I flashed the phone completely with the phone, not connected to the computer.

360 Mobile Guard-Application Tools-One-click Root-Done.

Brush may be able to brush,But no one has made a ROM package yet,And the possibility is also very low,The higher the system version, the higher the requirements for hardware,The performance improvement brought by the system upgrade refers to the configuration that can run perfectly,I want the old machine to only run XP,With win7 win8,Although the new system algorithm is improved,But the basic requirements have been improved。

ZTE V889D can be brushed, the method is as follows:

1.Go to the official website to find the ROM (version data package) you need.

Swipe the phone: power off (more than 50% battery) - press and hold the volume up button, menu button, and power button at the same time, and press the volume down button after the interface appears.

2.The first thing after entering the recovery mode is to perform the double wipe first, and perform the following operations, (in the recovery mode, press the volume up and down keys to select, and press the home button to confirm).

3.Check WipeData Factory Reset - Yes - Delete All User Data to confirm.

4.Then select WipeCache Partition - select Yes --- Wipe Cache to confirm.

5.Then press the volume to select installzip from sdcard, and then select choose zip from sdcard in the interface that appears, and then find the zip format rom flash package that you just put in the root directory of the sd card, and then press the home button to confirm, and then select yes.

6.Start flashing, return to the main interface of recovery after flashing, select Reboot System Now, confirm and start restarting.

7.The card flashing machine is over, and the boot upgrade is completed.

Yes, it is recommended to go to the Anzhi forum to find the section of your mobile phone There are many flashing bags made by the gods.

ZTE v889d root order:

First of all, you have to write recovery, and then you can root and flash third-party ROM, just like installing the system on the computer, you must have a bootloader first, and then you can install the system.

Copy it to your phone's memory card and store it in the root directory.

Then open it and follow the prompts to the next step.

3Press any button, then the phone will restart, and immediately do three things: close the window, pull out the data cable, and depress the battery. If you don't do step 0, you're in a cup and have to start all over again.

4. After 3-5 seconds, put on the battery, press and hold the volume plus and power buttons to power on until you enter a new recovery, as shown in the figure below.

4.Get root privileges.

Here is the one that follows the above and can be operated continuously.

In recovery, the volume up button Menu key - move up, the volume down button small house key - move down, the power button search key - confirm, back key - return to the previous menu.

Note: The new version of Recovery can use virtual buttons.

1. After entering Recovery, select "Select Flash Package from SD Card".

2. Select "Select ZIP file from SD card" again

3. Find the flashing package you just copied to the memory card and confirm it.

4. After brushing, return to the home menu and select "Restart System Now" to restart your phone.

Hello: According to your description, root is to obtain the administrator user account of the mobile phone, which can access and modify almost all files in the mobile phone operating system, which may affect the stability of the mobile phone, resulting in human failures, such as crashes, restarts, etc. According to the "Consumer Three Guarantees", root belongs to modifying the operating system software and does not belong to the scope of repair.

In order to improve customer satisfaction, Samsung provides hardware repair (warranty repair of parts other than the motherboard, which generally causes defects to major motherboard components such as memory and CPU after rooting) and free software upgrade services.

At present, Samsung i889 can be upgraded to the version, if the mobile phone has a new firmware, there will be a push update notification, the firmware upgrade can optimize some functions of the machine, improve the mobile phone system, make the mobile phone system more stable, more smooth. It is recommended that you follow the following method to refer to the attempt:

1.Upgrade via FOTA: Settings in the phone - About the device - System update - Update, the following is the upgrade method of Fota on Samsung's official website for your reference:

2.Connect to a computer through KIES to update the firmware, the following is how to upgrade the KIES software on Samsung's official website for your reference: