Why is the NVIDIA graphics card set to a high performance graphics card always restored

Nvidia. Graphics card set to a high-performance graphics card is always a solution to restore:

It is recommended to install the original Windows operating system, and do not use the ghost version of the operating system, because this kind of operating system is mostly a thin system, and the stability and compatibility are very poor;

install it so that the stability of your operating system is very high;

At the same time, because the current configuration of computers is relatively high and the memory is relatively large, chip manufacturers are also developing 64-bit operating systems.

It is recommended that you install the 64-bit operating system, otherwise some hardware may not be able to use the driver after the 32-bit operating system is installed.

In addition, you are reminded to use as little domestic optimization software as possible, and carry out the so-called "optimization" or "garbage cleaning", which can easily disable the boot operation of the driver or directly delete the driver by mistake, resulting in problems in the operation of the machine.

It's not a big problem, usually when installing the system, there will be a hardware installation package, but because it is universal, and there are too many types of hardware now, most of them are universal drivers, and the effect is not particularly good.

Problem solved:1If LZ has time, just look for a computer bag, when you buy a computer, you usually send a graphics card driver CD, you can install it, usually 3-10 minutes OK.

2.You can take the latest hardware test on 360, because Master Lu has now been acquired by 360, use the latest 360 hardware test to see if your graphics card can be upgraded, if you can, upgrade to the latest.

3. Re-installation, it should be solved.

4. Maybe the performance of your graphics card is really not very good, then don't force it, otherwise it will not be good to break the computer.

Hello, what graphics card is yours for Nvidia? I'm also an NVIDIA card, why don't I have this option in 3D? What's your graphics card?

If you are a dual graphics card user, first right-click on the desktop nvidia control panel Everything reverts to defaults Don't choose a single graphics card, otherwise you won't be able to play the game!Give 3q points

You enter the safe mode to change, press F8 when the machine starts, the driver of the graphics card in the safe mode does not start, you can change it in that mode.

Or reinstall the system.

Install Master Lu on the computer,In the view of driver management,See if the NVIDIA graphics card driver has been installed,If the driver is installed,The power AC adapter is connected to the notebook normally,The power management is set to balance or high performance,After these are ready,Right click on the computer desktop,Select NVIDIA control panel (you can also come in from the system control panel),3D management,Global settings,Select high performance,That is, use a separate display。

The 3D settings in NVIDIA graphics cards can be set to maximum performance as follows:

2.In Control Panel, select NVIDIA Control Panel.

3.Click "Adjust Image Settings via Preview" in the top left corner.

4.In "Use My Preferences, Focus on", select the leftmost Performance.

5.In the NVIDIA Control Panel, select Manage 3D Settings.

6.In Global Settings, select "High-Performance NVIDIA Processor" and turn off "Triple Buffering".

7.In Features, set Texture Filter-Quality to High Performance.

8.Set "Texture Filtering - Negative LOD Offset" to "Lock".

1. Enter the control panel to find the hardware and sound;

2. Go to Hardware & Sound to find the NVIDIA control panel;

3. Double-click to enter the NVIDIA control panel, click Manage 3D settings on the left side of the screen, and then select Program Settings;

5. In the last step, click Add to use the high-performance processor when running the program.

1. "3D Settings" - "Adjust Image Settings by Preview" - "Use My Preferences, Focus on" - "Performance" - "Apply".

2. Go ahead and select "Manage 3D Settings" - Maximum Pre-Render Frames.

3. Manually lower the number of pre-rendered frames.

4, and then adjust the "V-Sync" option of the machine to "Off".

5. Adjust the "Power Management" option in the graphics card settings bar to "Highest Performance First".

The steps are as follows:

After clicking "Properties" on the desktop, select to enter the "NVIDIA Control Panel"; (Some are right-clicked on the desktop mouse, and the pop-up right-click menu has the NVIDIA Control Panel option).

1. Select "Manage 3D Settings" according to the first step in the figure, and then see the following situation in the box:

2. "Consistent Texture Lock", select "Use Hardware" for this option;

3. "Triple buffering", this option is effective after turning on VSync, it is generally recommended to "off";

4. "Anisotropic filtering", this option has a significant improvement in the image quality of the game, choose the multiple according to your own graphics card level, it is recommended to choose 4x for low-end graphics cards, 8x for mid-range graphics cards, and 16x for high-end graphics cards;

5. "Vertical synchronization", this option can eliminate the image "traverse", but it has high requirements for hardware, and it is generally recommended to "forcibly close";

6. "Multi-monitor hybrid GPU acceleration", this option is only effective when using multiple display devices, and generally maintains the default "multi-monitor performance mode";

7. "Smoothing - Mode", this option is to choose whether you want to forcibly control the game anti-aliasing in the driver, if the game itself has an AA option, you can choose "Application Control"; If you want to force the settings in the driver, you should select "Replace any application settings";

8. "Smoothing - Grayscale Correction", after this option is turned on, the AA effect can be better, and the performance will be reduced very little, it is generally recommended to "on";

9. "Smooth Processing - Settings", this option can only be adjusted when "Replace any application settings" is selected, 2x, 4x, 8xq, 16xq are ms sampling, 8x, 16x are cs sampling; Among them, the performance of MS sampling decreased greatly, and the balance between effect and performance of CS sampling was achieved. This option is chosen by yourself according to the performance of the graphics card;

10. "Smoothing - Transparency", this option is to set the transparent anti-aliasing mode, the transparent anti-aliasing mode can achieve non-edge AA, the effect is better; Multiple sampling performance is higher and the image quality is slightly weaker, and super sampling performance is lower and the image quality is better.

11. "Force to be mipmaps", select "None" for this option;

12. "Extended Limit", select "Off" for this option;

13. "Texture Filtering-Anisotropic Sampling Optimization", this option determines whether to use the optimization algorithm for anisotropic filtering, select "On" to improve a little performance and lose a little bit of image quality, and select "Off" to ensure the highest image quality;

Texture Filtering - Negative LOD Offset", select "Locked" for this option;

14. "Texture Filtering-Quality", this option can control other "Texture Filtering" options in one step, and "High Quality" is generally recommended for the pursuit of image quality;

15. "Texture Filtering-Trilinear Filtering", the effect of this option is similar to "Anisotropic Filtering Optimization", you can choose according to your own requirements for the picture.

How to adjust the performance priority mode of the graphics card (nvidia graphics card vs. AMD graphics card) nvidia display settings first, go to the nvidia control panel, adjust the image settings by previewing, use my preferences, right-click on the desktop and select nvidia control panel:

3D Settings" - "Adjust Image Settings via Preview" - "Use My Preferences, Focus on" - "Performance" - "Apply".

Manually turn down the number of pre-rendered frames appropriately;

Then pay attention to adjust the "Power Management" option in the graphics card settings bar to "Highest Performance First", as shown below

How to set up the AMD graphics card: Right-click on the desktop and select "Catalyst Control Center", and the name of the dual graphics card model is "Display Card Properties";

In the upper right corner, select "Preferences" - Advanced View

Click on "Power" --powerplay" --enable powerplay "--maximize performance".

Click on "Games" - 3D App Settings".

Adjusting the Mipmap Verbosity and Dealiasing Mode focuses on Performance.

Wait for vertical update" can be adjusted according to the actual situation, if the current game frame rate is insufficient, please turn on vertical update, if the game speed is very stable and want to further increase the frame rate, please turn off vertical update, as shown in the figure:

Right-click on your desktop and select NVIDIA Control Panel.

3D Settings" - "Adjust Image Settings via Preview" - "Use My Preferences, Focus on" - "Performance" - "Apply".

If the game still feels stuttering, you can select "Manage 3D Settings" - Maximum Pre-Render Frames".

Manually turn down the number of pre-rendered frames appropriately;

Then adjust the unit's "V-Sync" option to "Off".

Adjust the "Power Management" option in the graphics card settings bar to "Highest Performance First".

All special effects are set to off, and you can do it. There is no Off, set it to the easiest, or set it to default.

1. Right-click on the desktop and select NVIDIA Control Panel;

2. "3D Settings" - Adjust Image Settings by Previewing "" - Use Preferences, Focus on "--Performance" --Apply";

3. If the game still feels stuck, you can choose "Manage 3D Settings" - Maximum Pre-rendered Frames";

Manually turn down the number of pre-rendered frames appropriately;

Then adjust the "V-Sync" option of the unit to "Off" as shown in the following figure:

Then pay attention to adjust the "Power Management" option in the graphics card settings bar to "Highest Performance First", as shown below

1. Right-click on the desktop and select "Catalyst Control Center". (The name of the dual graphics model is "Display Card Properties").

2. Select "Preferences" in the upper right corner - Advanced View";

3. Click "Power" --powerplay" --enable powerplay"--maximize performance";

4. Click "Game" -- 3D Application Settings";

5. Adjust the "mipmap detail" and "anti-aliasing mode" to focus on "performance".

Wait for vertical update" can be adjusted according to the actual situation.

If the current game is running low on frames, turn on vertical updates. If the game is stable and you want to increase the frame rate even more, turn off vertical updates.

1.Set the priority of the graphics card in the NVIDIA control panel, and if you plug in the graphics card on the desktop, you can basically plug in the graphics card and work as a discrete graphics card by default.

2.If it is a notebook, you should set the priority in the driver management, whether the integrated graphics card is preferred or the discrete graphics card is preferred.

3.This will allow you to adjust the priority settings of your graphics card.

The NVIDIA graphics card performance "Priority Mode" can be set like this:

Set the graphics card priority in the computer control panel, if you plug in the graphics card on a desktop, it will work as a discrete graphics card by default.

On the notebook, you should first set the priority in the driver management, whether it is the integrated graphics card or the discrete graphics card first.

Now it's time to adjust the priority settings of your graphics card.

1. In the graphics card control panel - manage 3D settings - select performance first.

2. Lower the number of 3D pre-rendered frames.

3. Set the highest performance priority in power management.

Choosing to use a high-performance processor globally is fine. Ignore the rest.

Only the independent display or the shielded core display does not have that item.

If it is a notebook with dual graphics cards, you can right-click the mouse to open the game's program boot.

Choose to run it with a discrete graphics card.

If that doesn't work, use the old driver.

If you are referring to the replacement of the security phone that is bound, according to the situation you described,

My book is the same as you.,The current so-called smart graphics card switching function is too immature.,Generally, the default is 3D class for independent display processing,Integrated display output,And below 2D is integrated graphics processing and output。 Obviously, this game is not 3D. You set the program settings to set it to a centralized display to try it, this function must be the latest graphics card driver.

Big brother, think about it, there are two options, NVIDIA GPU and high-performance NVIDIA processor, you choose the latter, how can the former be running.

Switching graphics cards is too cumbersome, and generally only one type is used.

Directly block your monopoly.,If there's a separate display.,After all, this thing doesn't mean that he can fix the computer.,You can only fool around.,Take the money and leave.。

Right-click on the computer desktop, find the "NVIDIA Control Panel" and click, and the window that opens will be directly on the "Manage 3D Settings" page, find "Preferred Graphics Processor" under "Global Settings", and click the drop-down menu to select "Integrated Image".