How to flash OPPO X905

The OPPO X905 flashing tutorial is as follows: Flashing ROM via CWM Recovery:; 1. Copy the best official ROM or third-party ROM to the root directory of the memory card (OPPO X905 drive letter); 2. Turn off the phone, remove the battery and put it back on; 3. Press and hold the [Volume Down Button] and [Power Button], when the OPPO screen appears on the screen, release the Power On button, do not release the Volume Down button; 4. When entering the recovery interface, select [Install Zip from SDCARD] and press the power button to confirm, and select [Choose Zip from SDCARD] power button to confirm; 5. Select the ROM to be flashed up and down the volume button, for example, press the power button to confirm; 6. There are a lot of no volume buttons, select yes - install power button to confirm the start of flashing the ROM; 7. The phone will automatically restart and automatically enter the system (please wait patiently for the first time when you turn it on).

The flashing tool can be used with xiazaiba.

ROM can be used with ROM home,Brush Expert's。。。

If the screen is black,You can use other flashing tools,As long as you recognize the phone,You can flash the phone,,, it's really not good to go to the forum to learn the hotkey card brush,It's the boot button + volume plus or minus key,Select SD under the zip flash.。。。

OPPOX909T Preparation before flashing:

1. Check whether there is a problem with the SD card of the mobile phone and whether the capacity is sufficient;

2. Check whether the power of the mobile phone is sufficient, generally keep it above 50%, so as to avoid bricking due to power failure in flashing;

X909T flashing package, flashing package is in zip format, other formats may be line flashing package, not suitable for recovery flashing;

oppox909t

Flash the package and copy it to your phone's SD card.

After completing the above series of preparations, we can start flashing, flashing is very simple, follow the steps!

OPPOX909T flashing process:

1. First of all, we will oppo

The X909T boots into Recovery mode after entering Recovery mode.

2. Next, we need to empty the data and cache in the original mobile phone, this step is very important, if you do not empty the data in the original mobile phone, and re-flash into the new system, the system may not start after flashing due to different data structures, and it has been stuck in the boot animation, so you must pay attention!

Use Wipe Data to restore factory settings first.

Use Clear Cache again to make sure that the cache data on your phone is completely emptied.

3. Next, we will start to flash the flashing package, and we will select [Install Zip Package].

4. Select [Select Zip File from SD Card] from the new menu

5、oppo

X909T will show the list of files in the SD card, and will also see the zip file we just put to the SD card, in this step, we need to select the flash package file we just copied to the SD card, and confirm after selection.

6. Here will prompt you if you want to install the flashing package to your phone, we select "Yes".

7. When we confirm, Recovery will start to perform the flashing operation, generally speaking, according to the ROM size and mobile phone configuration to determine the time of flashing, it will not take long to complete the flashing.

8. When recovery flashing is completed, there will be a prompt.

9、oppo

After the X909T flashing is completed, we return to the initial screen of recovery, select Restart the system, the phone will restart, the first initialization system boot time is longer, everyone will wait patiently to enter the new system.

The oppox905 flashing tutorial is as follows:

Flashing ROM via cwmrecovery:;

x905);

2. Turn off the phone, remove the battery and put it back on;

3. Press and hold the [Volume Down Spine Button].

With [Power on button], when the screen appears oppo

screen, release the power button, do not release the volume down button;

4. When entering the recovery interface, select [InstallZipFrom.]

SDCARD] Press the power button to confirm, and then select [ChooseZipFrom].

sdcard] power button confirm;

5. Select the ROM to be flashed up and down the volume button to be flashed, such as pressing the power button to confirm;

6. There are a lot of no

Volume key: select Yes

install

The power button confirms that the ROM is flashing;

7. The phone will automatically restart and automatically enter the system (please wait patiently for the first time when you turn it on).

View the original post

1. Preparation. In the OPPO official website**X903 firmware upgrade package, get the files in it (such as the upgrade file suffix of ** is ldquo;.rarrdquo;, for example:

10089 11, you need to unzip the file to get it, such as the firmware upgrade file of the state fruit ** is not required to decompress); And copy it to the root directory of the mobile phone storage (Note: After connecting to the computer, the disk name displayed by the mobile phone storage should be ldquo;

phonerdquo;

Do not copy to a TF card, otherwise it will not be able to be upgraded).

Second, the steps. 1. Turn off the mobile phone, remove the battery and put it back on.

2. In the shutdown state, push open the slider and press and hold quot at the same time; hquot;button and power button are released after 3 seconds, and the power screen appears.

3. Press ldquo again; hrdquo;key to enter recovery mode.

Press Enter again to start the upgrade.

5. After the upgrade is completed, it prompts quot; install

fromsdcard

completerdquo;Keyboard.

Enter key.

Select rebootsystem

Now, restart the machine, and the upgrade is complete.

6. After restarting the phone and entering the system, click Settings, select About Phone, and then you can view the current version number.

3. Attention. 1. Remember to back up relevant information in advance.

2. During the shutdown and upgrade process, the battery must be removed and reinstalled.

3. The file must be copied to the root directory of the phone's memory.

4. It takes 5 minutes to upgrade the whole process, please be patient.

5. If an upgrade is not successful, you can enter the setting after booting up. After the factory reset, enter the upgrade link again.