The computer time is not correct when it is turned on, why is the time inaccurate after the computer

It's not poisoning, it's that your motherboard battery is not on point, and it's not fully charged

The reason for this is that your motherboard wiring is aging, and the capacitor next to the CMOS battery is not working, if you can fix it, you can replace the capacitor, if it won't, then you can send it for repair, not much money

It doesn't make a difference when I'm talking! It's okay if you don't practice!

Viruses generally don't change the time of your computer.

It is estimated that the battery of the computer motherboard is not enough.

You can open the computer case.

When you see your computer's motherboard, remove a battery the size of a beer bottle cap from your computer.

This battery is a silvery-white button cell.

Older motherboards: This battery sits flat on the motherboard.

Nowadays, motherboards are generally at a 90-degree angle to the battery.

After removing the battery, go to the computer city to buy a new one and replace it.

There are generally two types of batteries: 3 and 5.

3 pieces can be negotiated to 2 pieces, and 5 pieces can also be bargained.

Dizzy, you're poisoned, this virus is time-changing.

You just use this software and it's absolutely easy to use.

The motherboard is out of battery.

So time doesn't run out when you turn it off.

You drive and go. Or go slowly.

Didn't hit the capital. Very little and the virus is only a few hours apart.

The time virus is here to mess with Kaspersky.

Generally, the motherboard battery is dead, and it is completely powered off after shutting down, so there will be a little difference in time!

It would be nice to change the battery.

Let's start with a simple trial, first change the battery.

The motherboard electronics are out of power, method: do not cut off the power supply after changing the electronics or shutting down.

Is there a problem with your time zone setting.

If the motherboard battery runs out, the previous computer time state cannot be saved, and then it will be reset to the motherboard's time.

There are basically two types of batteries used in desktops, one is 2032 and the other is 2035, and generally speaking, both batteries are common on any motherboard. Generally, CR2032 batteries are used in the motherboard, and there are ** in electronic cities and supermarkets in larger points, so it's good to buy a replacement.

A computer is a machine that uses electronic principles to process data according to a series of instructions. A computer can be divided into two parts: a software system and a hardware system.

The first computer was the ENIAC general-purpose electronic computer born at the University of Pennsylvania in the United States on February 15, 1946.

People refer to computers without any software installed as bare metal. With the development of science and technology, some new types of computers have emerged: biological computers, photonic computers, quantum computers, etc. On May 24, 1954, the transistor electronic computer was born.

Click Adjust Date and Time (take win10 as an example).

In the taskbar at the bottom of the desktop.

In the pop-up dialog box, click Adjust Date and Time to enter the Adjust Date and Time interface, and click Date and Time. Enter the date and time setting interface and turn on the automatic time setting button.

1. The reason why the computer time is always wrong.

Reason 1: It may be that the CMOS battery is dead, please replace the battery.

Reason 2: If the battery is new or there is not much time to replace, it may be caused by poor contact of the CMOS battery, if so, a small piece of copper is stuffed at the contact point.

Reason 3: The time of the BIOS is not saved or saved, but it does not take effect. If so, CMOS circuits.

There are problems, including the quality of the motherboard-related circuitry and the CMOS where the BIOS program is saved. If there is a problem with the motherboard circuit, it is recommended to repair it.

And Trojan Kill Tool Windows Cleaner Assistant to detect and kill malware and Trojans.

The above introduces the reasons why the time is not accurate and wrong, so the solution to the time is not accurate or wrong is very simple. It is mainly divided into the following three aspects.

1. First of all, it rejects virus interference and produces time damage.

We can use the current mainstream antivirus software.

360 Antivirus scans the computer to see if there is a virus in the computer, whether the computer time has been maliciously changed, if there is an antivirus, we can correct the time back to solve the problem.

2. The CMOS battery in the computer motherboard is aging, resulting in the low amount of internal storage computers.

The CMOS battery on the motherboard is a rechargeable battery.

However, if the computer is used for many years, the battery will age and cannot store too much power, so the stored power can easily be exhausted after the shutdown, resulting in the wrong time.

There are 2 main solutions to this problem, it is best to buy a new battery and replace it. But it can also be like this, after the computer is turned off, do not unplug the power on the main unit.

Plug can also solve this kind of problem, because the computer and the power supply are in the case of a block, the computer will always have a standby voltage for the internal clock of the motherboard, but this situation is easy to be affected by lightning and may damage the computer, so it is recommended that you replace a battery.

Reason 1: It may be that the CMOS battery is dead, please replace the battery.

Reason 2: If the battery is new or there is not much time to replace, it may be caused by poor contact of the CMOS battery, if so, stuff a small piece of copper pie judgment at the contact point.

Reason 3: The time of the BIOS is not saved or saved, but it does not take effect. If so, there is a problem with the CMOS electro dust shouting reroute, including the quality of the motherboard-related circuitry and the CMOS that saves the BIOS program.

If there is a problem with the motherboard circuit, it is recommended to rework the code bleed.

After clicking the time in the lower right corner, the right button will appear, and the date and time setting interface will appear, you can choose to check the time automatically, or you can modify the time yourself.