The phone is left to charge, and it won t turn on the next day

Hello! It is recommended that you try the following methods to see if it can be turned on:

1.Press and hold the power button for 10 seconds to force restart the phone.

2.You can try charging it with the original charger for 20 minutes, and then press and hold the power button for 10 seconds to see if it can turn on (the phone is completely out of power and recharged without any prompt).

3.When the phone is turned off, press and hold the volume up button and the power button at the same time for 3 to 4 seconds, after the vivo phone logo appears on the phone, let go of the button to enter recovery mode, first select wipe data factory reset, select wipe cache partition after completing the waiting interface jump, and select reboot system now to restart the phone immediately after completion. (Doing this will lose all the data on your phone (except the data on the TF card), including installed apps, **books, text messages, etc.) When there is no other way to solve the problem, use this and use it with caution.

If the above methods still can't be turned on or the mobile phone has important data, it is recommended that you take the mobile phone to the local after-sales inspection and processing, and the after-sales technician will handle it for you. You can go to vivo official ** to check the address of the after-sales service center:

Maybe it didn't rush or the charger was not good.

Method steps.

1.First of all, replace the charger of the mobile phone, now the mobile phone charger is basically universal, change one to see if it can be charged, if it still can't, you can rule out the reason for the charger.

2.If there is a spare battery, replace the battery to see if it can be turned on and charged, if it still can't be turned on, it is likely to be a problem with the mobile phone, and it should be sent to the after-sales service for testing and repair; If it can be turned on and charged normally, it is a problem with the battery.

3.At this time, you should observe the positive and negative electrodes of the battery that can not be charged, to see if there is a metallic luster, the battery may disappear in a high temperature and humid environment for a long time, resulting in conductive problems so that the machine can not be turned on.

4.It still can't be charged, it means that the mobile phone battery has entered a state of self-protection, and it needs to be activated at this time. If it is too troublesome, you can also use the following methods to activate it:

Find a universal charger, preferably the one that automatically identifies the positive and negative poles, charge it for 5 minutes after connecting it, and then take it off and install it on the mobile phone for direct charging, which can generally be activated at this time.

5.Finally, if the above method still cannot be activated, you can only send it to a professional to repair it.

1. Determine whether the keys of the mobile phone can be used normally, or whether the mobile phone has been flooded recently. If the keys of the mobile phone are abnormal or there is liquid ingress, it is recommended that you send the mobile phone for repair.

2. Please use the charger to charge the phone for 15 minutes, and then press and hold the power button + volume up button for more than 12 seconds to see if the phone can be turned on.

If the phone still can't turn on, it may be that there is an abnormality in the hardware circuit or system of the phone, and it is recommended that you bring the relevant purchase voucher to the OPPO official authorized service experience center for testing and processing.

The phone is charged and needs to be fully charged to activate the battery before it can be turned on.

It is usually the lack of battery life caused by incorrect operation, users often operate the mobile phone in the charging state, use non-original data cables for charging, charge when the power is empty for a long time, and often use the power bank to charge.

According to the above reasons, the user should eliminate them one by one and solve them one by one, so as not to cause fatal damage to the battery again.

Don't wait for the charge to run out to charge, the charging goes through first:

Constant current stage, at this time, the actual voltage of the battery is lower than the charging voltage (mostly, the battery voltage is increased during the constant current charging process, when it is increased to about 85% of the battery power is full), enter, constant voltage mode, the charging current is gradually reduced, the charging is about to be completed, and then enter, trickle charging mode, charging with pulse current, prolonging the battery life When the charger is charging, it is normal for the charger to heat up, but it is not normal to be hot.

To wait a little, generally the phone that is turned off will have a battery sleep period. He'll have to wait a little bit before he can watch the show.

If the mobile phone is lost for two days or three days, it will not be damaged, which can only mean that your electric board is useless, and the quality of your mobile phone is too poor.

The phone has lost power for two days, and now it can be charged, but it can't be turned on. Then I think you should charge it for a while longer, and then you can turn on your phone. It's still a short time to lose.

Then you give him a little more time to take a look, if the time to charge him for more than 8 hours still can't be opened, it may be that there is a problem with the phone.

The mobile phone has lost power for two days, and now the charging can be charged, but it has not been able to turn on, it may be due to the long-term power loss caused by the battery damage, so that it cannot be turned on, it is recommended that you go to a professional mobile phone repair shop to test and repair, and replace the mobile phone battery if necessary.

Normally, the phone has no power for two days, and it should be possible to charge it now, you can fully charge it first, and then turn it on later.

Your phone's motherboard may be broken, and you have to replace it with a new one.

Maybe he didn't charge it! Although it has been shown that it has been charged, in fact, he should not have been charged, so he can't turn it on.

So is this phone an Apple phone? Recently, the weather has been relatively cold, and the Apple phone often can't be charged. If it's an iPhone, you'll want to try it in warmer clothes.

You can press and hold the power button for 10 minutes to see if it can be turned on, if it can't be opened, you have to flash the machine.

In this case, there is a good chance that your phone battery is starving to death, and it is best to go to a repair shop to get a battery.

It means that the power is not enough to turn on, change the charger to charge, if it can't be the problem.

If the phone can be charged, but it can't turn on the phone, it means that it is not a battery problem, and it is necessary to consider other problems!

If there is a problem with the phone, it is recommended that you charge it, and if it does not turn on, you will have to send it to a repair shop for repair.

The battery is broken. You can change a battery, and the ** of the battery will not be very expensive.

In this case, you can only take it to the mobile phone store to others, help you take a look, and replace a battery if it is suitable.

You can take a look at this at Charge.

Theoretically, it's fine, but if it really doesn't work, go to the after-sales service and let them see it.

Don't turn it on yourself, surely, we're all professional.

Maybe it's broken, you go to the mobile phone repair shop to ask, see what's wrong, if it doesn't work, let the family repair it, and then it doesn't work, you can only buy a new one.

That is, it can't be flushed, the battery is useless, replace the battery.

Summary. 2. Press and hold the volume down button and add the power button for 30 seconds to force restart the phone to see if it can be turned on and enter the desktop; If not, please press and hold the [Volume Up + Power Button] at the same time, let go when you see the word vivo, move the cursor with the volume button, and confirm with the power button to see if you can enter the recovery interface, you can enter the "Recovery Interface", select the [System Repair Mode] menu, and try to repair the system according to the prompts.

3. If it still can't be turned on, please bring your mobile phone, charger, data cable and relevant proof of purchase to the customer service center for testing and processing.

Why does my phone charge for a day? Still can't turn it on?

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately.

Good. What phone?

I hope the above is helpful to you If you are satisfied with me, please give a thumbs up 2. Press and hold the volume down button and add the power button for 30 seconds to force restart the phone to see if it can be turned on and enter the desktop; If not, please press and hold the [Volume Up + Power Button] at the same time, let go after seeing the word vivo, move the cursor with the volume button, and confirm with the power button to see if you can enter the recovery interface, select the [System Repair Mode] menu, and try to repair the system according to the prompts. 3. If there is still no method to turn on, please bring your mobile phone, charger, data and relevant proof of purchase to the customer service center for testing and processing.

The mobile phone can't be turned on if it is not charged for two hours, mainly because the battery needs to be replaced after the battery life, and then the application software consumes a lot of power, so try to uninstall the power-consuming software.

If you and your friends call Wang Huai for an hour without charging, the power is assumed to be higher than 30%, and the power consumption of the Lingxiao machine does not exceed 2 hours, it is not normal, you need to go to the after-sales service to test the health of the battery, and replace the battery with a new one if the battery life is up.

The mobile phone is automatically shut down, indicating that the mobile phone battery is seriously depleted, and the finch fiber has reached the point where it cannot be recovered.

A new battery will need to be replaced to fix it.