Can the leakage test button be used as a trip?

No way. The leak leak tripper is designed with two high-strength engineering plastics, which do not support frequent breaking, and are only used for testing. When the wear is severe, there will be a phenomenon that the bite cannot be killed (cannot be locked), and the leakage of the warranty will also be scrapped.

It's good to use the empty open in front of the leak protection.,This supports daily switching.。

Of course. The leaky experimental button is actually a trip device. When we were conducting leakage tests. The principle of tripping is adopted.

Hello: 1, the test button of the leakage protector canTripping trips, while the mixing switch is a mechanical switch powered off.

2. Test buttonIt's trippingThe coil is engaged and the power is lost.

Differences]: The test button is invalid when the power is out; After the test button is powered off, it needs to be reset when closing.

No, this and the shape and color are not very good, matching.

There are times when the test button fails. Sometimes he doesn't jump at all when he presses it, but he still jumps when there is a leak.

Therefore, when used as a trip, it may be a bit risky.

When the experiment button, this should be able to be used as Teucer, and this should be a Three Kingdoms is also more consistent, so it should be possible to enter these anomalies Yes.

The red one is the test button to test whether the performance of the leakage warranty is normal, and the gray one is the reset button

Of course, the leakage test button cannot be used as a support, which is completely different and cannot be used universally.

The leakage test button can be used as a toko, as it is much easier and more convenient.

Experiment button.

Yes, but it is not recommended.

If there is no problem, it can be used.

The leakage protection plug test button can not be used as a breaking circuit, and the frequent pressing of the test button will shorten the service life of the leakage protector, and it is stipulated that the leakage protection function is checked once a month.

Press the reset button, it is better to pull the switch directly, often use the test button to switch the power supply, will cause the leakage of the internal mechanical chain life shortened, if once the leakage accident occurs, the mechanical chain damage, and can not trip, will bring adverse consequences, please think twice. Next to the test button is the lever switch, the life can reach hundreds of thousands of times, use it to switch the power supply!

It can be used for shut-off, not for turning on a switch! It won't turn on the switch.

In two cases, first, the newly bought switch generally does not appear that the experimental button does not jump, or the incoming line is connected to the wrong line. Generally, the limited circuit breaker is 380V, if it is connected to 220V, it will never jump, if it is the other way around, you must see the nameplate on it.

The second is the quality of the switch. Leakage circuit breakers are divided into leakage protection and overload protection. The experimental button does not jump is a leakage failure, which does not affect other functions of the circuit breaker.

Generally, in some factories, the leakage circuit breaker that is bought, and the leakage part must be removed, like a punch, which will be a little leakage, and it will always trip, which is not a mistake. The experimental button of the landlord's leakage switch does not jump, and it can be used as an air switch, which is no major problem.

It's best not to use it, like the general factory, during the inspection, if you find that the experimental button does not jump, it is not allowed to leave the factory, and there is no leakage protection function, so do you say there is still any meaning in using it. It is recommended to replace it immediately.

The leakage protector test button should first be connected to the power supply.

If the power supply test button does not jump, it means that there is a problem with the leakage protector and there is no leakage protection. It can be used as a general circuit breaker, but the effect is slightly worse, and the short-circuit protection and overload protection functions of some leakage protectors are not as good as ordinary circuit breakers.

It is not recommended.

It can be used, but there is no leakage protection function, so it is better to replace it.

After reading so many answers, no one asked you whether the switch was electrified, the test button of the leakage circuit breaker can only be tested after the switch is connected to the power supply, and the inside of the test circuit needs to be driven by power supply, if the live circuit breaker does not jump when the test button is pressed, then the problem is broken.

Just swap it out.

If the test button does not work, it means that the leakage protector is broken and needs to be replaced.

It is recommended to replace it directly, if it does not trip, what is the difference between it and direct connection, and the circuit protector is installed for over-negative protection.

If the leakage does not trip, it means that the fuse is broken and should be replaced.

Today I met an experimental button that didn't work, and then the leakage protector burned on its own, what's the matter.

Explain that the leakage protection function has been lost! Do you think it works?

That's the experimental button for the leakage protector. It can be used as a switch, but it is not suitable.

The leakage protector of water heater, the international standard name is residual current action protector. It can be used not only in water heaters, but also in the low-voltage power supply system used.

Leakage protectors used on water heaters to monitor the current of neutral and phase wires in the power supply lines of electrical appliances (water heaters) at the same time. If the sum of the currents of the two wires is not zero (there is a surplus), it means that there is a current passing through other places (leakage or electric shock), and then the protector takes action to use the electrical appliances to disconnect from the power supply, thereby protecting the safety of equipment and personnel.

Leakage protector There is a small button on it, which is the experimental button of the leakage protector. Its function is to simulate the situation of someone being electrocuted to check whether the leakage protector is working properly. Because the leakage protector disconnects the power supply when the button is pressed, and the reset button can be used to turn on the power supply later, the leakage protector has a certain switching function.

The test button of the leakage protector has a certain switch function, but it is not designed as a switch (there is a leakage protector with a switch), whether it is the service life or the impact on the electrical appliances during the on-off process, it is not as good as the specially designed switch. Therefore, it is possible but not appropriate to use the test button of the leakage protector as a switch.

Circuit breaker circuit breaker. Leakage protector leakage protection is two different products, the role is different. Anyway, I'm seriously at home replying to your questions, I hope it helps!

The circuit breaker is called an open space> which is the role of a switch that automatically protects the low-voltage power distribution.

6。bits and 2 x "1p + n" miniature circuit breakers?

1-position "1P+N" miniature miniature circuit breaker with breaking capacity only, but without accessories; Two large "1P+N" miniature circuit breakers are in volume, but have the breaking capacity and can be used with various accessories.

7。What are the characteristics of any leakage protector, leakage and water leakage accessories products?

Fail-safe human body from electric shock and damage to the insulation of electric shock equipment.

8。How to use leakage protector?

Leakage protection. After you install the wiring and press the leakage test button of the leakage protector, a temporary artificial leakage scenario design can be created to test whether the leakage protector is in action. The test should be done once a month, and the button should be tested to check the leakage protection device.

In the case of leakage, the leakage protector trips automatically. If the fault is not cleared, even if the handle is then pushed to the "on" position, it is also possible to re-connect the circuit in question 4 to avoid human error in connecting the faulty circuit.

9。How to use leakage accessories? b>?

BR> is used in conjunction with miniature circuit breakers, overload, short circuit and leakage protection. Before you install the wiring, press the Test button Water Leakage Attachment can be used to create an artificial short leakage scene design to test for leakage action Attachment. The test should be done once a month, and the function of the button should be tested to check for leakage.

In the event of an overload or short circuit, the action of the miniature circuit breaker handle instead of the leakage action connects the handle. Leakage occurs when all actions of the two handles are triggered. Reset, the drain attachment handle must be reset.

The cause of the leakage, miniature circuit breaker and leakage grip handle attachment is not eliminated before not reset.

10。Comparison of Leakage Protector and Leakage Accessories?

Both from the leakage protector. However, leakage protection can be installed independently, and leakage accessories must be used with miniature circuit breakers.

11。Comparison of leakage circuit breaker and leakage protection, leakage accessories?

The leakage circuit breaker combines overload, short circuit and leakage protection, plus a small leakage protection circuit breaker or leakage circuit breaker accessory, plus a small equivalent.

You can't tell from the test button alone.

Short circuits also trip, overloads also trip.

Short-circuit protection is generally red button, and overload is generally white.

1. The test button on the leakage protection plug mainly tests the leakage protection function of the leakage protection plug, press the test button, if the reset button jumps normally, it means that the leakage protection function of the leakage protection plug is normal; After the reset button jumps, the system is in a power-off state, if you use it, you need to press the reset button, and the indicator light is on, indicating that the leakage protection plug has been energized and can be used normally.

2. In addition, it is important to remind that the leakage protection plug is only a preventive measure, and any preventive measures cannot guarantee 100% of the problems, so you must remember to turn off the power first and then take a bath with an electric water heater.

As shown in the figure: the test button on the leakage protection plug mainly tests the leakage protection function of the leakage protection plug, press the test button, if the reset button jumps normally, it means that the leakage protection function of the leakage protection plug is normal; After the reset button jumps, the system is in a power-off state, if you use it, you need to press the reset button, and the indicator light is on, indicating that the leakage protection plug has been energized and can be used normally.

In addition, it is important to remind that the leakage protection plug is only a preventive measure, and any preventive measures cannot guarantee 100% no problems, so when taking a bath with an electric water heater, you must remember to turn off the power first, and then take a bath.

I can't see the diagram clearly. I think the big button in the middle is the reset switch.

According to the situation you described, it can be assumed that the reset switch has failed, and it only plays a role of off. However, this does not affect the use. The test switch can actually do this too.

As for the absence of sparks, this is difficult unless you can fix the normal reset switch and use it to turn off. Because the test switch is actually a leakage protection switch, as an emergency protection measure in the event of leakage, the circuit is forced to shut down, and it will ignite itself when the power is connected.

The water heater leakage protection plug is only used to test whether the leakage protector is normal, if the power indicator is off after pressing, then the leakage protection is working.

The leakage protection plug is used to detect the "residual current" in the "ground" circuit. Its working principle is to penetrate the two power cords of the plug into a special "zero sequence current transformer" center hole at the same time, when the electrical appliances are normally electrical, the current flowing through the live wire and the middle line is completely equal, the current is in and out, and the secondary coil of the current transformer has no voltage output.

The test switch on the false alarm plug is not used as a normal switch, but only to test whether the leakage protection device can work normally.

If you want to turn it off, you can unplug it or turn the temperature knob to the lowest temperature.