Can chemical equilibrium be established under adiabatic conditions?

Updated on science 2024-05-17
11 answers
  1. Anonymous users2024-02-10

    Of course, it is possible to establish a good chemical balance.

    , that is, to a certain extent, its temperature and the proportion of reactants at that time should be able to reach some kind of equilibrium, although its temperature is getting higher and higher, but there can be a balance at high temperatures, right?

  2. Anonymous users2024-02-09

    Absolutely.

    As long as the conditions are stable.

    It is possible to establish a chemical equilibrium.

  3. Anonymous users2024-02-08

    Do you see chemical equilibrium? Adiabatic conditions can establish a chemical equilibrium, which he can according to his. The conditions to be established have a certain basis.

  4. Anonymous users2024-02-07

    In this case, it is not possible to achieve such a chemical equilibrium, and the main reason is that all its values are not particularly idealized in the adiabatic state.

  5. Anonymous users2024-02-06

    Master of organic chemistry, specializing in college entrance examination chemistry for more than 10 years. Full of enthusiasm, just for persistence. Hahaha, it's a bit official, but it's true, you'll know after reading it.

    It has been 19 years since I first came into contact with chemistry in the third year of junior high school.

    Chemistry is a major from undergraduate to graduate school. In the first semester of graduate school, I was introduced by my senior to a first-year high school student, and it has been more than 10 years since I started my teaching career.

    When I just graduated, I was recruited into a ** unit in Sichuan with the policy of talent introduction, and stayed for about 2 years (during the rest day also substitute teaching), more and more I found that this job was not suitable for me, I was unhappy, I thought about it for a while, weighed the pros and cons, or resigned, and returned to Xi'an again.

    I just returned to Xi'an, thinking about what kind of job I am suitable for, I have been a chemical engineer for a period of time, and I have not done a good job, but since the first year of graduate school, I have not given up teaching students, and I suddenly realized that I am very happy and down-to-earth every time I go to class. Only by constantly practicing and experiencing will you discover what you are suitable for.

  6. Anonymous users2024-02-05

    The chemical equilibrium can be established under the transfer conditions, and this should be better able to contribute to this uh, the reaction is carried out better, so it should also be relatively good.

  7. Anonymous users2024-02-04

    Therefore, this line should also be able to establish chemical equilibrium, but this should be necessary for some reactions, not all reactions should be able to be in other equilibrium.

  8. Anonymous users2024-02-03

    Chemical equilibrium can also be established under adiabatic conditions, as long as the conditions for the chemical reaction are met.

  9. Anonymous users2024-02-02

    The so-called constant pressure, literally, means that the pressure of the reaction system does not change. The essence is the degree of change in volume, which affects whether the probability of molecular collision changes or not, which in turn affects the chemical equilibrium.

    Constant pressure, when not filling in the gas that participates in anti-allergic trapping, in the equation.

    When the sum of the stoichiometric numbers of the two gases is equal, the equilibrium does not change. However, when the total number of stoichiometric numbers is unequal, the equilibrium will move to the side with the largest stoichiometry.

    When the reactive gas is charged, the equilibrium moves in the direction of weakening the charged gas.

    The so-called adiabatic refers to the fact that the heat transfer exchange between the reaction system and the outside world is 0, which is essentially the temperature change of the reaction system, which affects the number of collisions of molecules. At this time, the heating and cooling of the system depends on the reaction heat.

    The positive and negative, adiabatic conditions within the chemical equilibrium, mainly affect the temperature, the same exothermic reaction.

    The chemical equilibrium of equal conditions other than adiabatic will certainly be more biased to the side of the reactant than under non-adiabatic conditions, because the temperature is increased by exothermics.

    Therefore, if the constant pressure adiabatic is not changed, then in fact, the constant pressure is not constant temperature, and the direction of equilibrium movement depends on the stoichiometric number of the actual equation and the heat of reaction.

  10. Anonymous users2024-02-01

    Constant pressure is generally a movable piston, or other pressure, and general atmospheric pressure is more commonly used.

    Adiabatic insulation means that it is well insulated and has no heat loss, but it is not possible in practice, which is an ideal situation.

  11. Anonymous users2024-01-31

    Constant pressure you know, that is, the pressure is constant, as for adiabatic, you have to look at the definition more, figure it out, in fact, as long as you do more questions, you can probably grasp the law, as soon as you see adiabatic, you have to think of q = 0 and pv = constant.

    In fact, you can imagine the feeling of absolute, that is, in a container, cut off from the transfer of heat to the outside world, that is, there is no heat exchange. But the temperature can change, because you can work on it, and the knowledge does not transfer heat to the outside world.

Related questions
9 answers2024-05-17

Article 22 of the Regulations on Population and Family Planning: "A couple who meets one of the following conditions may apply to have another child: (1) only one child, who has been identified as having a non-serious hereditary disability by a medical appraisal institution for sick and disabled children, and is currently unable to grow into a normal labor force or will seriously affect the marriage match; (2) One party is a soldier, armed police, public security policeman's police, or a person who has served in the line of duty as a result of a second-class or higher disability, or one party is the only child of a martyr with only one child; (3) One party is widowed and the other party has not given birth; (4) One party is a divorced person and has only one child or has given birth to two children in accordance with law, and the other party has not given birth; (5) Neither party has given birth, but becomes pregnant after lawful adoption; (6) One party is an only child of two generations, or both husband and wife are only children and have only one child; (7) One party has been engaged in underground operations for more than five consecutive years, and is still engaged in underground operations, and there is only one girl. >>>More

8 answers2024-05-17

Conditions that affect the formation of chlorophyll

1) Light Light is the main condition that affects the formation of chlorophyll. Changing from protochlorophyll to chlorophyll requires light, and if the light is too strong, the chlorophyll will be destroyed by photooxidation. Seedlings grown in the dark are yellowish-white, as are the stems and leaves that are shaded or buried in the soil. >>>More

4 answers2024-05-17

No, starch is a polymer compound, which can be hydrolyzed under certain conditions, and dilute sulfuric acid can be added and heated. Starch is an important polysaccharide, which is a natural polymer compound with a relatively large molecular weight. Although it is a sugar, it has no sweetness and is a white powder that is insoluble in cold water. >>>More

23 answers2024-05-17

When the paint surface is seriously aged and cannot be solved by polishing and reduction process; When the paint surface is eroded by the lens effect and the light is seriously lost; When the oxide layer of the paint surface is thick, local corrosion occurs, and it cannot be polished and reduced; When the paint surface is deeply scratched and cannot be removed by polishing; When the paint surface is partially or partially damaged. >>>More

16 answers2024-05-17

There's no need to rank, and the girl 920 seconds kill all the camera phones on the market! The Nokia Lumia 920 is undoubtedly a popular and popular model, and it has won many awards in the selection of various professional **. The phone uses an inch PuremotionHdips touchscreen, which not only supports 1280 768 (WXGA) resolution and 332ppi pixel density, but also has the characteristics of high screen brightness, fast refresh speed, etc., and the ultra-sensitive touch technology used in touch sensing, which allows you to wear gloves, use long nails, or even a regular ballpoint pen to complete all the phone touch operations. >>>More