How to clean the watch band, it is best to be like new after cleaning

Updated on vogue 2024-05-12
7 answers
  1. Anonymous users2024-02-10

    The cheapest moisturizer, hand cream, rub it with a soft cloth dipped in it, or a freshly used **, rub it back and forth a few times, try it.

  2. Anonymous users2024-02-09

    Usable: Wipe with a cotton swab dipped in medical alcohol!

  3. Anonymous users2024-02-08

    Scrub with alcohol or toothpaste.

  4. Anonymous users2024-02-07

    How to clean a leather strap:

    1. Use hand cream, especially expired hand cream, rub it with a soft cloth, preferably an old mask cloth. This method is not only suitable for leather straps, but also for all leather, imitation leather materials, as well as light-colored leather shoes and boots. This method not only decontaminates but also protects the leather.

    2. It can be cleaned with "Lemon Belle Franc", also known as "Clomax", which can clean, polish and protect the leather strap.

    3. Using safflower oil can effectively clean the watch belt, and using glasses cloth to absorb some safflower oil will wipe the watch belt very clean, but there will be a little taste.

    4. Go to the pharmacy to buy a bottle of hydrogen peroxide for cleaning, take one-tenth of hydrogen peroxide mixed with warm water and add washing powder and gently scrub with a brush. It can not only decontaminate, but also disinfect and sterilize.

    Metal strap: You can scrub it with a toothbrush dipped in dish soap, and the watch can be wiped clean with a clean flannel cloth dipped in warm water. The cloth strap can be washed with dish soap, laundry detergent.

  5. Anonymous users2024-02-06

    After receiving a basin of water, use a soft-bristled toothbrush dipped in toothpaste to gently brush the surface stains, be careful not to rinse directly with tap water, because the water pressure of tap water may exceed the waterproof strength of your watch, it will enter the water, go to a professional watch repair shop they will take off the strap and clean it, so it is safer.

  6. Anonymous users2024-02-05

    1. Wash the surface of the strap first, and then clean the stains in the gaps of the band. Wash the surface of the strap first, then clean the stains in the crevices of the strap of the strap of the belted watch. These gaps are tightly connected, so it is difficult to clean the dirt inside.

    Now these gaps are stretched open by a cylinder made of books, and the dirt inside can be cleaned. Then wash the back of the strap, also to clean the surface stains. Next, wash the stains in the crevices, which can be cleaned with a brush.

    Finally, scrub the strap with clean water.

    2. Wash the strap first, and then clean it. Soak the watch strap in boiling water with detergent for about 15 minutes. Why?

    Because the clasps on this strap are so tightly connected that a cylinder made of a book cannot open the gap between the joints. The principle of thermal expansion and cold contraction is used to make the gap between the joints open by themselves, so that they can be cleaned. After 15 minutes, you can start cleaning the strap.

    3. Use a professional watch cleaning liquid. For those who wear belt watches, they should insist on frequent wiping and maintenance with a special watch solution. How to look at the belt table from the surface is good and bad:

    For better straps, the two edges are generally sewn with thread, and the lower ones are basically glued, and the strap will be easy to open after being wet. For cracked straps, replace them in time.

  7. Anonymous users2024-02-04

    1. Disassemble the strap for cleaning, use an ultrasonic cleaning machine, the cleaning liquid is added to the cleaning spirit, depending on the degree of dirt, the dirt is serious, you should do several more cleaning, and then rinse with clean water, and dry it with an electric fan.

    2. If you plan to clean it yourself, it is recommended to disassemble the strap and add an appropriate amount of washing spirit to hot water, soak it for 10 minutes, and then scrub it with a soft-bristled toothbrush. After finishing, rinse with clean water and dry with an electric fan.

    3. When cleaning the watch, all the watch parts should be disassembled, the movement should be wiped with gasoline, and then other equipment in the watch should be cleaned by professional equipment, and finally oiled and assembled.

Related questions
7 answers2024-05-12

How it works:

Remember not to soak the leather watch strap in water for cleaning, after the leather products are soaked in water, it is easy to crack, wrinkle and deform. >>>More

9 answers2024-05-12

You can try using activated carbon: remove the plastic tape from the table, put it in distilled water filled with activated carbon, stir thoroughly, and pay attention to the moderate temperature, it should be effective, right? >>>More

8 answers2024-05-12

1. When there are scratches or slight scratches on the mirror of the watch, you can drop one or two drops of water on the mirror of the watch, then squeeze a little toothpaste, and then wipe back and forth with a cotton ball to remove the scratches. Remember not to rub it with alcohol, in case the glass and alcohol will chemically affect and shatter! >>>More

24 answers2024-05-12

Are you already living in? If you live in, the problem is still relatively big, so you should pay attention. You can ask a professional testing agency to test it, because the pollution of decoration has a certain standard, if it is normal, you don't have to worry too much, you can use the ventilation method to remove, if you want to be faster, you can also use some activated carbon to remove pollution, which has no negative effect, it is a physical removal method. >>>More

5 answers2024-05-12

Let's ...... with gasolineIt should be ok.