The watch was worn for a few days, and the steel rim on the outside of the dial was scratched

1. When there are scratches or slight scratches on the mirror of the watch, you can drop one or two drops of water on the mirror of the watch, then squeeze a little toothpaste, and then wipe back and forth with a cotton ball to remove the scratches. Remember not to rub it with alcohol, in case the glass and alcohol will chemically affect and shatter!

2. When there are scratches on the case or strap, first polish it with an oil stone, then choose sandpaper with appropriate particle size and grind along the original sanding pattern. However, it should be noted that if the surface is polished, this is more complicated, and you have to use a professional tool - a polishing machine.

3. For the case and strap with sanding and polishing process, you should first do sanding and polishing when trimming, and then polish and polish, but you need to cover the sanding part that has been trimmed.

1.Ultrasonic cleaning (thorough cleaning of the watch case, back cover and bracelet)2All scratches and abrasions can be removed with a rubber carbon-silicon grinding wheel or by hand.

3.Use a flat brush wheel to draw a satin finish, or a muslin wheel to polish the gloss of your watch's surface.

4.Most minor scratches on acrylic glass can also be removed (serious damage can only be replaced when reading, in addition, sapphire glass can not be polished).

Maintenance] {1st Floor, No. 175, Heping Road, Heping District, Tianjin}

1. To repair the scratches on the surface of the stainless steel watch, you first need to prepare the following materials: a toothpaste, a pack of paper towels.

2. Next, apply an appropriate amount of toothpaste to the scratches on the surface of the stainless steel watch.

3. Then take out another paper towel and set aside.

4. Next, use a paper towel dipped in toothpaste to wipe the scratches on the surface of the stainless steel watch.

5. Finally, the scratches on the surface of the stainless steel watch are repaired.

Hope solves your problem, hope.

If it is really stainless steel, if this stainless steel is very simple to solve, you can polish it with toothpaste, the vast majority of watches are not so simple as stainless steel surface, generally plated with a layer of falling, if you polish the electroplating layer will be dropped by the watch use engineering, will not avoid lettuce for a long time, these scratches will be dropped by the mother-in-law, if you must ensure that the watch has no scratches,

1. As the process of the surface of the case, there are basically two kinds: polished and sanded, or both, and the scratches on the watch case should be repaired according to the original process. However, if there are deep hard scratches, it will be more troublesome, because neither polishing nor sanding techniques are enough to polish away such scratches. 2 The local deep scratches on the case or strap need to be done locally before repairing, depending on the location, such as the case side of the case, it is even possible to use a fine small file, more is to use oil stones, and then under the magnifying glass, carefully boring the deeper scratches, if there are deep scratches, it is necessary to focus on polishing the local area with oil stones.

This needs to be carried out under a magnifying glass, the purpose is to evenly smooth the scratches, when the scratches are basically ground to be smoothed, choose sandpaper with the right particle size, and grind along the original sanding pattern, usually this line is radial with the dial as the center, so this is a careful work, to a little bit, the grinding effect will be good and realistic. It is recommended to use the kind of sandpaper used in the jewelry industry, preferably imported, such as German Warrior brand water sandpaper. 3 hand-held tools are also particular, it is recommended to use a hemostat on the surgical operation, only take a small piece of sandpaper, fold it in half and clamp it with a hemostat, parallel to the original texture to do sanding, sapphire glass is relatively hard, you can not consider it, but the shell of the watch is stainless steel, you must pay attention to it when operating, do not scratch it, if necessary, you can cover it with adhesive tape.

On the technical side, it is necessary that all the sand patterns go all the way around, and they all start from the center of the dial and are radial. 4 All scratches on the watch case and strap can be removed or the appearance of the watch can be refurbished in this way. The straight-line shape of the pattern is easier to do, if the pattern is concentric, then it should still be done by using electric machinery.

5. It is not difficult to fix the scratches on the case strap with sandpaper yourself, as long as you are careful and steady, you can do it; But for the surface is polishing process, then you must use a cloth wheel polishing machine, and ordinary people can't do it. 6 For the case and strap with sanding and polishing process, you should first do sanding and polishing when trimming, and then polish and polish, but you need to cover the sanding parts that have been trimmed.

The stainless steel strap is scratched, what should I do? There is no better way, because this stainless steel strap can only be replaced if it is scratched, and there is no way to repair it.

Watches are a common object in life, because they can help people set the time well, and add highlights to your outfit, so it is loved by people, but many people have the question of whether the watch has scratches after wearing it for a long time.

Although the main role of the watch is to watch the time, but it is a very hot item at the moment, and it is precisely because of this that the watch will be scratched after wearing it for a long time, when there are scratches or slight scratches on the watch mirror, you can drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball, you can remove the scratches and make the watch glass as new.

Scratches on the watch are a problem that many people encounter when wearing watches, and it can be solved if you want to repair and polish it, but this is only a relatively light scratch, but if you bump out of a small pit, it will be difficult to recover! Unless it is an expensive watch, there is no need to polish the general watch! No matter how good the watch is, it will have scratches after wearing it for a long time.

There are many ways to repair scratches on the outer bezel of watches, and one of the most common methods is with the help of toothpaste. Apply toothpaste to the scratch and rub the scratch clockwise with a soft cloth, and the scratch will disappear in a few minutes, so you might as well try it!

Hello, I will find out the reasons and solutions for the scratches on the watch after not wearing it for a few days:1The material is not wear-resistant

If the surface material of the watch is not wear-resistant, scratches can easily occur. In this case, it is best to use a cavity film that protects the surface or a more textured watch strap such as a chain strap. 2.

Hard surface: If the scratched area has a hard surface, it may be caused by the collision of hard particles on the surface of the watch. In this case, repairs can be made with a surface weakening liquid and a polished round cloth.

3.Inappropriate wearing: When the watch is worn, it is easy to rub against the body, clothing, etc., and it is easy to get scratches.

It is recommended not to wear the watch too tightly, so that even if there is friction in the banquet, it is not easy to scratch. If the watch has deep scratches, it is advisable to seek help from a professional repair shop for a surface repair or reconstruction. Hope mine is helpful to you.