Mi 1 problem for help, Xiaomi s problem If you know, help answer it, thank you

From your description, the light flashes when charging, it can be seen that it may be caused by poor contact when you are charging.

First of all, you can check whether there is a problem with the charger and data cable, and whether each interface is plugged in tightly. There is also whether the power supply of the power strip is normal.

Then you can open the back cover of the phone, detain the battery, and use an eraser or soft cloth to wipe the contacts of the battery and the contacts on the phone. Observe whether the three contacts at the position of the battery on the mobile phone are on a horizontal line, if not on a horizontal line, you can use your hand or tweezers to gently pull the three contacts to align. Then leave the battery for 10 minutes and try it when you plug it in and turn it on.

If it doesn't work, you can go to the after-sales service to check whether there is a problem with the battery connector. Some of the battery connectors of the small M1 have problems, which can be restored after replacement.

Hi! If you are through the official website of Xiaomi.

For purchase, it is recommended that you apply for after-sales through the "Apply for After-sales" on the order page.

A more detailed description of the problem will help netizens understand the troubles you are encountering and help you solve the problem more accurately. Thank you for supporting Xiaomi phones!

I suspect a bit of a hardware problem Try flashing the phone first If it doesn't work, I'll go to Mi Home and let them test it I suspect that the charging circuit is broken.

After-sales there detection brush machine maintenance can be.

My problem is the same as you, this can be brushed, if not, it is a problem with the battery or data cable interface, it may also be that the data cable is broken, change a data cable! Hope it helps.

It's good upstairs to add that although it's MIUI, it's still customized according to Android, so it's normal to run some program cards or jump out Buying any Android phone is not something that can be completely avoided The same goes for the iPhone.

Bright and bright feathers answered in detail.

The current is not enough for you. Are you using the original charging cable and the original head?

Hello, 1.Please change an SD card to see if it can be read.

2.Please insert this SD card into another mobile phone to see if you can use it.

3.If your Xiaomi phone is short of socks and can read other SD cards, please format this SD card and put it into your Xiaomi phone.

4.If Xiaomi can't read other SD cards, please go to a repair center near you to check it.

Address and ** inquiry.

At the same time, 9 Xiaomi Home in Beijing, Shanghai, Nanjing, Wuhan, Chengdu, Hangzhou, Xi'an, Shenzhen and Guangzhou have maintenance capabilities.

We hope you find the above reply helpful.

I can only say, there is a problem with your SD, try it again, don't use Kingston's, change it to Xiaomi's official website.

Dude, 90% of Xiaomi mobile phones have this problem, you can only ask for more blessings to buy a card from the official website to try.

This is a phone quality problem.

Hi! Please try it out according to the following two points:

1.Please back up your data first (by turning on System and Security Backup to create a new backup. Then, enter recovery (power off, press and hold the volume on + power button to enter recovery) mode, clear cache, clear user data, clear all data, restore backup, settings and third-party security software in the phone do not recover.

Try if it works properly.

b.During this time, please back up your data, enter recovery (power off, press and hold the volume up + power button to enter recovery) to clear the cache, clear user data, clear all data,. The computer is equipped with a driver,** Miflash flash tool,This is the link to install the driver:

Mi-1 1S series.

Mi-2 series.

c.When everything is ready, please follow the flashing tutorial on the official website to use the sixth line brush, which is the official flashing tutorial:

It's still in the phone's memory if it's stopped, and it's in the SD card when it's moved, so it won't be anything. It doesn't show up, maybe it's a network problem.,If it doesn't work, reinstall it.。 It is recommended to use the 91 assistant to install, and select the installer to the SD card in the 91 assistant settings as the priority, so that it can be installed directly in the SD card, and you don't have to move it around by yourself.

This question,The recommended answer is not very clear,The reason is this,When you don't install the card, the cache of software like QQ is stored in the phone,That is, the avatar** and the like,And then after you install the card,The phone defaults to save its own space,Will import these cache files into the card,And the path of the mobile phone QQ to read the cache file is also changed to the card,But because you moved the cache file halfway and stopped,So it was not completely moved, That is to say, the avatar you said only shows a part, and the other part is still in the storage of the phone but QQ can't read it, and the way to make the avatar display all is to clear the cache in the system settings--application--qq--clearing。 Then log in to QQ from scratch. That's it.

It doesn't matter if you don't move it all before, it will gradually cache completely, under normal circumstances.

The question about SD When the data stops moving, restart and continue to move It's OK after a few times I've tried. Questions about mobile QQ You update it and try it.

You can take a look at the next 360 mobile phone assistant and see if it is connected.