Why does the screen jitter 30 after the game crashes?

The signal cable of the monitor may have the problem of poor contact, and the landlord can tighten the knob on the monitor plug to make it work closely with the graphics card to reduce the possible poor contact.

It could also be that your monitor's resolution and refresh rate are set too high or too low, so try setting the resolution and refresh rate to the middle.

There is also a bug in the driver of the graphics card or monitor, if you play other games will not appear in this situation, I think it is likely to be a problem with the graphics card driver, it is recommended to update the graphics card driver.

Rebooting solves many problems.

There is still one running in the system process after the CrossFire game ends. It's a ruthless tool that monitors system and network processes and takes up a lot of memory.

So it's okay if you finish playing other games and go into CrossFire, but after playing other games, something goes wrong.

After you finish playing CrossFire, you have to press Ctrl+Alt+Del to forcibly end the process.

It may be that your graphics card driver is not installed properly, for your computer model, reinstall a graphics card driver to try! (For your reference only).

Your graphics card may have a bit of a hard time with Dragon Babu and Aion, and CrossFire itself doesn't require a very high configuration, compared to the much higher configuration required by Dragon Babu and the higher configuration of Aion.

This type of failure can be caused by setting the monitor's refresh rate incorrectly, and setting the monitor's resolution and refresh rate too high or too low.

Resolution, also known as resolution and resolution, can be subdivided into display resolution, image resolution, printing resolution and scanning resolution. Resolution determines how detailed a bitmap image is.

In general, the higher the resolution of the image, the more pixels it contains, the sharper the image, and the better the quality of the print. At the same time, it also increases the storage space taken up by the files.

Unit:

The units that describe resolution are: DPI (dots per inch), LPI (lines per inch), PPI (pixels per inch), and PPD (pppixels per degree). But only LPI is a scale that describes optical resolution.

Although DPI and PPI are also units in the category of resolution, they have different meanings than LPI. Moreover, LPI and DPI cannot be converted, and can only be estimated empirically.

General LCD monitor,Your screen resolution and game resolution are inconsistent, which will cause the screen to have horizontal fluctuations or patterns,You can adjust the game resolution and screen resolution to the same,Anyway, my problem is really solved,But it is not excluded that there is a problem with the display or graphics card。

If the screen shakes to play games, it may be that the graphics card driver is too old, and it is recommended to update the latest graphics card driver, so that the compatibility can be guaranteed. It may also be that there is a problem with the resolution setting of the screen, and what I said upstairs is also a reason, and the background automatic pop-up window or program turns on the DND mode. It's also possible that there is a problem with the cable connecting your monitor and graphics card, try a different cable.

The following steps can be taken to improve:

1. If there is an independent graphics card in the trembling socks, the graphics card driver must be installed. The drive is good, and the settings are missing.

2. Open Settings in the properties on the desktop.

3. Open the graphics card option in Advanced in Settings.

4. Launch the NVIDIA Control Panel in the graphics card options.

5. Turn off VSync in the Manage 3D settings.

6. Change the maximum number of pre-rendered frames to 1 and change the resolution to 75 NMR, and change the color depth to 16-bit color, and finally save it.

Hello dear players:

Customer service 08 is at your service, about your problems, about the situation you encounter to give you a few suggestions1It is recommended that you upgrade your local Adobe Flash Player to the latest version.

2.If there is optimization software, it is recommended that you optimize the system configuration. Or please refresh a few times and re-enter the game later. Give it a try.

3.You open the web page, click on Tools - Inernet Options - Delete Files and Delete Cookies - OK, or it is recommended that you right-click on the game screen, then click on Settings, pull the progress bar to the far left, and then click OK to log back in.

4.Close some other pages and programs that you don't use, or change the network environment, try the official customer service of Seventh Avenue Dandantang, and we will be happy to answer your questions

51 bullets are not shaking at all... There will only be a vibration when ** lands...

The best way to shake the screen is if you follow the screen shake, and when you get to the same frequency as your computer, you will notice that it doesn't shake at all. Hehe.

Apparently your graphics card is not supported !! Only the default is up.

The monitor refresh rate is set too low.

When the refresh rate of the display is set to be lower than 75Hz, the screen often shakes and flickers, so adjust the refresh rate appropriately, such as setting it higher than 85Hz, and the screen shaking will generally not appear again.

The power transformer is too close to the monitor and chassis.

When the power transformer is working, it will cause large electromagnetic interference, which will cause the screen to shake. Placing the power transformer away from the chassis and display can solve the problem.

Inferior power supplies or power supply equipment are aging.

The workmanship and materials used in many miscellaneous computer power supplies are very poor, which is easy to cause the circuits of the computer to be poor or the ability to supply and sell live can not keep up, and when the system is busy, the display will especially appear screen shaking. When the power supply equipment of the computer starts to deteriorate, it is easy to cause the same problem.

The speakers are placed too close to the monitor.

The magnetic field effect of the speaker will interfere with the normal operation of the display, causing the display to produce magnetic interference phenomena such as screen shake and color crossing.

Viruses Some computer viruses can disrupt the screen display, such as: character inversion, screen shaking, graphic flipping display, etc. The ubiquitous screen shake scripts on the internet are enough to make your head as big as a cow after a hit.

The graphics card is not in good contact.

After the graphics card is reinserted, the fault can be troubleshooting.

Win95 98 system after write cache caused.

If this is the case, disabling all drive write-back caches in Control Panel - Tether - Performance - File System - Troubleshooter can solve the problem fundamentally.

The power filter capacitor is damaged.

Open the case, and if you see the top of the power filter capacitor (the largest capacitor on the board) bulging up, then the capacitor is broken, and the screen shake is caused by a power failure. Once the capacitor is replaced, the problem can be solved.