Decoration must see bathroom water and electricity renovation small space university asked

The bathroom is the most frequently used space, but although the bathroom is small, if you are not careful, it will affect the convenience of life in the future. So, how to perfect the design of bathroom decoration waterways and circuits? Today, I have compiled a note from the decoration master, let's take a look!

Waterways:

1. A faucet for washing machines.

2. A faucet for the mop pool (it is best to set aside a faucet to clean the mop without a mop pool).

3. Leave the water inlet and outlet of the water heater.

4. A toilet interface.

5. There are two hot and cold water outlets in the washbasin.

6. Two drains: one for the washing machine and one for the shower.

Circuits:

1. It is best to leave a socket behind the toilet (it is convenient to install the clean treasure in the future, if you don't use it first, you can ask the electrician to wrap the wire and buckle a panel.)

2. There is also a socket switch on the right side of the washbasin (a switch that can blow the air after taking a shower and control the mirror headlight).

3. The socket of the washing machine.

The switch of the main light and exhaust fan in the bathroom is generally outside the door of the bathroom; The line is generally walked on the ceiling. )

Bathroom decoration precautions:

1. Angle valves should be installed on the washbasin and toilet water pipes to facilitate future maintenance.

2. When installing other bathroom products, pay attention to avoid the water pipes and circuits on the wall, remember! It is advisable to consult the water circuit archive beforehand**.

3. When workers install exhaust fans, pay attention to whether they install ventilation pipes and seals (some workers are lazy to save this step, and your home will smell every day in the future.) )

4. The power switch should be equipped with a waterproof box.

5. After the pipeline is completed, the pressure test should be carried out, and then the waterproof treatment should be done.

6. After the floor drain is installed, the flushing test should be carried out quickly. (During the installation process of workers, cement will fall into the sewer pipe, and it will be damp and solidified after a long time, so that the water will not pass.) ）

7. If the washing machine is reluctantly installed in the bathroom, you can consider installing it in the balcony kitchen and small hall, which can also extend the life of the washing machine. (The premise is that there is water supply and power supply.) )

8. The floor drain should be opened frequently to clean up the hair and other debris inside, and then put some water in it to prevent the aftertaste.

9. There should be a threshold stone at the door of the bathroom. Be careful to seal the underneath well, otherwise the floor will be damaged by blisters if you lay it outside.

10. Pay attention to the lights in the bathroom! It is best to choose anti-fog and waterproof energy-saving lamps with cold light sources (features: safe and power-saving).

11. You can change the single faucet of the washing machine to a mixed faucet, so that there will be hot water for washing clothes.

12. It is also important to choose exhaust. The power should be high, the sound should be low, and the wind should not be reversed.

The above is the bathroom decoration water and electricity design plan and precautions, of course, each home is different for each house, although the experience is suitable for the general family, but the reminder is still based on the actual situation of their own home to design.

The above was published on 2015-09-13, the current relevant housing purchase policy please refer to the actual situation).

Click to receive the red envelope for house viewing, and receive 100 yuan in cash directly.

What are the precautions for bathroom decoration?

Guangzhou Tooling Bao Decoration Company solves problems for customers throughout the process.

1. Pay attention to the ground, waterproof and non-slip toilet floor decoration materials are best used with non-slip floor tiles with raised patterns, which have good waterproof performance and will not be too slippery even if they are wet.

2. When the top is moisture-proof and covered on the top of the decoration bathroom, we must pay attention to prevent water vapor, so it is best to use PVC gusset with good waterproof performance. This gusset can be mounted on the keel and can also be used to cover the pipe.

3. The "safety first" toilet for circuit renovation is relatively humid, so you should be extra careful when installing lights and wires. Luminaires and switches should ideally be protected and joints and latches should not be exposed.

4. The heating equipment can not save the bathroom, which is the place we often use to take a bath, but in winter, the bathroom will become very cold, and the temperature difference is large, and people are easy to catch a cold. Therefore, floor heating, bath bombs and other heating equipment are also indispensable objects in the bathroom. The type of product depends on the specific situation.

5. The quality of sanitary ware should be ensured, and the sanitary ware of the bathroom should be selected first-class, and the service life should not be greedy for cheapness. At the same time, pay attention to remember the distance between the drain holes before decoration, and choose bathtubs, showers, toilets, wash basins and other sanitary ware according to the size, so as not to be inappropriate in the decoration. It is best not to use the toilet within three days after it is installed, so as not to affect its stability.

6. The lighting should be bright, and the bathroom can generally choose a waterproof sunshine wall lamp or an explosion-proof incandescent chandelier, and the lighting can be slightly stronger to make up for the lack of natural lighting.

7. Proper greening, adding vitality The bathroom should not become a "corner forgotten by green", the owner can place shade-tolerant and moisture-loving potted plants in the bathroom, so that the bathroom is a little more angry and a little less cool.

8. Ensure good ventilation It is easy to accumulate moisture in the bathroom, so ventilation is particularly crucial. It is best to choose a Mingwei with a window. If it is a secret guard, in order to make the hygiene not moldy, no hair, no damp insects, etc., in addition to installing a high-power, good performance exhaust ventilation fan, you should also pay attention to avoid "wrapping", especially near the ground. Revise.

Bathroom is one of the necessary functional spaces of the home, and hydropower renovation is inevitable when decorating the bathroom, but most owners do not understand the hidden project of hydropower transformation, so how to transform the bathroom water and electricity? Below we will bring it to youToilet water and electricity renovationexperience, I hope it can help everyone.

How to renovate the toilet water and electricity?

Toilet water and electricity renovation experience 1, according to the drawing construction, the process is simple: the bathroom water and electricity transformation can be carried out according to the Zhongcai toilet water and electricity transformation process atlas according to the map positioning construction, without the need to design the pipeline direction on site, so as to simplify the construction.

Toilet water and electricity renovation experience 2, pipeline sealing, anti-fencing and anti-odor: Zhongcai toilet hydropower transformation process atlas requires sealing and installation of pipelines at each water point, so as to completely eliminate the problem of insect odor in sewer pipes.

Toilet water and electricity renovation experience 3, standard process, energy saving and safety: the process atlas clearly stipulates the insulation and installation spacing of cold and hot water pipes, so as to reduce the energy loss between cold and hot water pipes.

Bathroom water and electricity renovation experience 4, there are drawings to follow, and the after-sales service is simple: the water and electricity are constructed according to the drawings, which provides the basis for the location of the pipeline for the later wall drilling or pipeline maintenance, so as to make the after-sales service simpler.

5. The transformation of the waterway should also be based on the facilities of your bathroom, such as toilets, washbasins (bathroom cabinets), mop pools, women's toilets, water heaters, solar energy, showers, bathtubs, washing machines, etc.; They are all necessary tools for the bathroom, and before the renovation, the developer generally only left a running water, so we need to add a certain amount of water according to our needs.

Bathroom water and electricity renovation experience is trapped in the letter 6, because the bathroom is a place with water, safety must not be careless. Therefore, when changing the circuit of the bathroom, you must ask professionals, and the line should be as high as possible and not low, so that professionals can draw a circuit construction drawing for you for future maintenance.

How to transform the toilet water and electricity brought to you by the above Wang wheel? The full content of the bathroom water and electricity renovation experience.

In fact, this waterway suppression is just to seek peace of mind, if the problem is detected, it can only distinguish the leakage of the hot and cold water pipes, which part is difficult to find accurately, so there is no problem is the best, if there is a problem, there is a high probability that the cold water pipe or hot water pipe can only be replaced. The easiest way is to install the leakage switch, and it should be noted here that the brand selected is good, which also determines the quality of the leakage switch and the life of use.

Heaters, bath bombs, hair dryers, electric water heaters, exhaust fans, etc., these household appliances not only bring immeasurable convenience to our lives, but also improve the water and electricity installation standards of our bathrooms a lot of grades, the most obvious is electrical appliances. But if there is a cutting machine, the plumber can also do it conveniently. When smoothing the trunking, masonry is involved.

Therefore, from the operation process is the cross operation of the three types of work, if you are decorating yourself rather than the decoration company, then pay attention to the coordination of their cross work and each other.

If you want to fix the conduit, you must be 200 mm away from the fixing point, so that it will not affect the instability of the conduit. The hydropower renovation in the concealed project is a place that everyone pays great attention to in the decoration, and it will be a heavy loss if it is not done well in the early stage, and it will be a heavy loss if it is renovated again. So you have to understand some basic hydropower construction standards, so that workers won't be pitted in the process of construction.

There is a screed layer of elastic line groove on the ground, do not arbitrarily raise the overall ground elevation, if there is a line pipe to cross, you can open a small groove at the intersection, the bottom line pipe to the groove pressure, to ensure that the above line pipe and the ground level. Purpose: To ensure that the ground is raised to a minimum.

Some people who really can't do it start to change the water pipes from the time they enter the house, and all the water pipes are replaced, and the joints are relatively firm; The circuit needs to pay attention to the circuit problem, the shunt circuit, one loop per space, one loop for high power, and there are high-power electrical appliances in the kitchen and bathroom

I don't think it's particularly difficult to renovate the bathroom with water and electricity, because the space of the bathroom is relatively small, so it's very easy to take water and electricity, and it's also very convenient to renovate.

It is still very difficult to renovate the water and electricity in the bathroom, because there are many circuits, and if one is not careful, it will cause water leakage.

The difficulty still depends on the facilities and wires in your home, and if it is an old community, it is indeed more difficult, because the direction will be more chaotic.

Of course, it is very difficult, so it is best not to change the water and electricity at will in the bathroom.

Of course, the water and electricity renovation of the bathroom is quite difficult, because it involves various circuits, and it is really a big project to dismantle and renovate it when the time comes.

It is still very difficult, because the space of the bathroom is very small, but the circuit is very scattered, if you want to renovate, you must find a professional plumber to help.

It's not very difficult, and if I want to renovate, I usually choose a professional to let them do the renovation, because I don't know anything about it.

The difficulty should not be large, because the bathroom itself has more water and electricity lines, so there are some lines, just install them directly.

The difficulty is still very large, if the design is not reasonable, it is easy to lead to problems in the use of the bathroom, and reasonable arrangements must be made.

The renovation of the bathroom is very difficult, requires continuous removal of stitches, and will take a lot of time and money.

I think the renovation is still quite difficult, and it also needs to relay some water and electricity lines, and it is also very time-consuming.

With the increasing price of housing, many people are discouraged from buying a house that can easily cost millions. At this time, small apartments.

The house has become the first choice for many young people to buy a house for the first time. The smaller the house, the less space can be used, which is important for the decoration design of the house.

The demands are high. Generally, there is a bathroom of 40 square meters to 50 square meters.

Most of them are between 2 and 4 square meters. So how to design and decorate the super small bathroom.

Is it reasonable? 1. How to design the dry and wet separation area in the ultra-small bathroom.

The restroom is a very frequently used place. Washing, toileting, and bathing all have to be solved here. The generation of a large amount of water vapor usually makes the bathroom very damp, and many people like to separate the dry and wet bathroom, which can effectively block the moisture and extend the furniture and appliances.

service life.

Extra-small bathroom with glass partition.

or wall partitions.

It's unrealistic, it takes up space, and the bathroom looks crowded. At this time, a shower curtain.

The problem can be easily solved. A beautiful shower curtain, with a waterproof platform, can effectively separate dry and wet. And when not in use, pull the shower curtain to the side without affecting the secondary use of the space.

Second, choose a suspended bathroom cabinet.

On the one hand, the bathroom cabinet will be in contact with water for a long time, reducing the service life, and on the other hand, it will also appear bulky. It is better not to choose this kind of ultra-small bathroom. The suspended bathroom cabinet is easy to clean. The overhanging area can also be used to store washbasins.

Mop bucket and other items, very handy.

3. Make use of wall space.

The ultra-small bathroom has limited space and is equipped with a shower and toilet.

Bathroom cabinet, washing machine.

After that, there was not much space left. In this case, consider making more use of the front area. Attach a towel rack to the wall.

Storage cabinets. etc., one-click storage of commonly used items. You can also buy a shelf above the toilet.

Paper towels, laundry detergent, disinfectant and other items have space to be stored. If it is a new house decoration, you can let the master make a niche in the wall, the niche is in the wall, does not take up space, and is a good choice for a super small bathroom.

As long as the ultra-small bathroom is reasonably planned and utilized, and the dry and wet are separated, the owner's experience can also be greatly improved.