Is it true that spherical self ligating brackets are not easy to drop brackets?

Ordinary square self-ligating brackets because the stress surface of the square brackets is multiple plane directions, when people are talking, eating, singing, different sizes of force will come from multiple "plane" directions, and the force is large, so it is easy to cause the brackets to fall off frequently. In addition, the stress surface of the spherical bracket of the spherical self-locking bracket is a "spherical surface", which can remove the force from different directions through the "smooth curved surface", thereby reducing the probability of the bracket falling off. In addition, it is not recommended to eat too hard food, otherwise it will affect the correction effect and correction time.

Hello: There are many reasons why the bracket is easy to fall, such as the bracket bonding surface and the tooth surface are not convex, the adhesive performance is not good (expired), the opposite tooth tip can bite the bracket, the doctor's operation error (acid etching is not enough, saliva pollution), the patient does not cherish it (gnawing hard objects) and so on.

For patients, what you can do is to be cherished and not eat hard food too often. Also, when sticking to the brackets, try to spit out the saliva to reduce the possibility of saliva contamination.

Losing two weeks means that the tooth has not been ** for two weeks, so it will not only not move in the direction of ** in these two weeks, but will appear in a certain **. However, the specific degree of correction depends on the specific situation of orthodontic treatment such as time, tooth position, age, and previous orthodontic treatment. Generally, two weeks is not too serious, especially for the teeth behind the caninees, two weeks is nothing.

This is equivalent to extending the entire orthodontic treatment program by two to three weeks.

Still, it should definitely be glued back in time. In addition, if this is done repeatedly, the consequences are not as simple as above.

Hello, the difference between the traditional metal square bracket and the spherical bracket is still relatively large, the square bracket I believe many people have seen, square and angular, most of the lips will be worn out in the early stage of wearing, after all, our lips have to move many times a day. In addition, due to the edges and corners, the square bracket has many grooves and dead corners, and it is easy to hang food on it when eating, so it can be said that it is difficult to clean, and sometimes it will fall off.

The spherical bracket can be said to be an upgraded version of the square bracket, its spherical design has a smooth appearance, which effectively reduces the friction between the material and the lips, and is relatively more comfortable after wearing, and because the hemispherical shape is relatively smooth, the food residue after eating is not easy to retain, which is more conducive to tooth cleaning, due to the special design of the spherical bracket, the power of correction can be removed through the spherical surface, and the probability of the bracket falling off after wearing is also greatly reduced, so it is favored by many orthodontic people. However, due to the obvious characteristics, the correction of the spherical bracket is relatively high, so you can choose according to your own situation. The above is a comparison of the difference between square brackets and spherical self-ligating brackets, I hope it can help you!

First of all, the shape is different, one bracket is square, the other is round, and the difference in shape also makes them bring different feelings to the orthodontic patient in wearing. The square shape is slightly larger than that of the ball holder, which will be easier to scrape into the mouth, and it is not easy to clean the ball holder.

Nowadays, there are more and more people who love beauty, especially teeth are the most important place for people, and many people will use this if they feel that their teeth are unevenSelf-locking bracketsto help you correct, but at this time you still need to pay attention to some details. Next, I will introduce to you what are the advantages of self-locking brackets and how to deal with brackets when they are dropped.

Self-locking bracketsWhat are the advantages:

1. Shorten the time of orthodontics.

The self-ligating bracket is a better correction technique at present, and it uses a memory functionSelf-locking bracketsdevice, but also elastic straight arch wire. This increases the speed at which the teeth move.

2. Extend the interval between follow-up visits.

Self-ligating bracket orthodontic technology also uses a new orthodontic technology, so that it can extend the time of follow-up visits by half, which also helps orthodontic patients reduce the number of follow-up visits.

3. Reduce unnecessary tooth extractions.

The self-ligating bracket also uses the most advanced line of digital measurement and diagnosis. This allows for an accurate measurement of the patient's jaw bone mass and avoids unnecessary tooth extractions.

4. Beautiful, comfortable and fast.

The self-ligating bracket also looks relatively small from the shape of the bracket without ligature wire, so it will not cause puncture wounds to the mouth, and most importantly, it can make you feel more comfortable and make it easier for you to clean.

What to do if the bracket is dropped.

1. In fact, people who have orthodontic teeth know that there will always be some small accidents in these times, such as some brackets falling off, and there may be accidentally swallowing the traction rubber band into the stomach, the most terrible thing is that your mouth will be worn out by accident, and even some friends will have bizarre accidents such as broken arch wires, etc., there are always some unexpected accidents that you can't imagine, in the face of these accidents, we still have to be cautious and must not be nervous, and it is the most important thing to contact your doctor quickly.

2. What are the factors for the bracket to fall off?

People who have been corrected have this experience, but they will accidentally have a variety of phenomena, such as gnawing bones and falling off, or you are brushing your toothbrush off, eating bubble gum sticky, etc., anyway, all kinds of phenomena are found, so I have to remind friends with braces that they must not follow the doctor's diet, and they are eating too hard, too sticky food is likely to cause this bracket to fall off.

3. Does the bracket fall off have any effect?

And there is another thing to worry about, I am afraid that if I take off this bracket, I will not be eaten in my stomach, this possibility is still relatively large, but there is no need to worry too much, because this kind of bracket is swallowed by you It doesn't matter much, and it will eventually be excreted with the digestive system.

Summary: AboutSelf-locking bracketsAt present, it is still a relatively new product, it has a lot of advantages, so it is also deeply loved by people, if you encounter some problems in use, then you can refer to the above methods to solve, I hope the above introduction will help you.

The differences between self-ligating brackets and metal brackets are: different fixation, different orthodontic treatment time, and different follow-up intervals.

First, the fixation is different.

1. Self-locking bracket: The degree of freedom of the archwire of the self-locking bracket in the groove increases and reduces friction.

2. Metal brackets: metal brackets need to be fixed with thin steel wires or ligature rings and arch wires, which are easy to cause soft tissue damage.

Second, the correction time is different.

1. Self-ligating brackets: The correction period of self-ligating brackets is short.

2. Metal brackets: The correction of metal brackets takes a long time.

3. The interval between follow-up visits is different.

1. Self-ligating brackets: The follow-up interval of self-ligating brackets is generally 8 weeks.

2. Metal brackets: The follow-up interval of metal brackets is about 4 weeks.

Find a doctor who can do spherical self-ligating brackets: Not all doctors can do spherical self-ligating brackets, and only doctors trained in spherical self-ligating brackets can do spherical self-ligating brackets, so find a doctor who can do spherical self-ligating braces now.

Facial examination: maxillofacial examination, oral examination, X-ray, to see the direction of teeth and bones to tailor the orthodontic method.

Take the model: put a quick shaping glue on the tooth, bite for 1-2 minutes and then take it out to become a tooth model for later use; Or use a digital mouth scan to perform an intraoral scan to build an oral model.

Tooth extraction: If you want to extract a tooth, you need to extract the tooth first, and according to the plan formulated by the doctor, the tooth will be extracted in batches.

Adhesive brackets: Adhesive brackets are worn with braces.

Follow-up visits: Follow-up visits are usually made once a month. The doctor will discuss the specific time with you.

Braces extraction: After the correction is completed, the braces are removed.

Wear retainers: For us adults to straighten our teeth, we should pay more attention to maintaining the shape. Therefore, the retainer must be worn.

Generally speaking, the retainer is worn 24 hours a day in the first half of the year, and then worn at night. If you don't insist on wearing a retainer, you will be able to do it, so be sure to insist on wearing a retainer.

Brackets are an important part of fixed orthodontic technology, in which adhesives are applied directly to the surface of the crown, through which archwires are applied to the teeth with various types of orthodontic force. The bracket is made of stainless steel, bioceramic or composite resin, and its main function is to fix the archwire, so that the archwire can play a better role and transmit the corrective force, so as to control the three-dimensional movement of the tooth and achieve the purpose of orthodontic treatment.

Orthodontics refers to the use of light force to induce the movement of teeth. Orthodontics is a slow, biological remodeling process. The alveolar bone on one side of the moved tooth is resorbed, and the alveolar bone on the other side is reconstructed, and finally the corrected tooth is repositioned and stabilized.

Therefore, receiving formal orthodontics** will not cause trauma to the teeth and periodontal tissues. So, is ceramic self-ligating brackets good or not, and how?

Compared with the traditional metal brackets, the time period of dental orthodontic treatment will be shorter, reducing the operation time of the alveoli and prolonging the interval between follow-ups, the general cycle of ordinary braces is 2 years, while the ceramic self-ligating brackets can complete orthodontics at least 3 months in advance, and take off the braces with relatives to help beauty lovers realize their wishes for beautiful teeth as soon as possible.

The ceramic bracket has a memory function that ensures that the archwire is in the correct position, which improves the effectiveness of tooth movement and has the predictability of the best results. Archwire replacement is simpler, no ligature is required, and the doctor no longer needs to "unlock" one by one, reducing the complexity of repeated burial procedures. Without ligature and ligature rings, it is more conducive to tooth cleaning.

In addition, the orthodontic focus of this technology is on the alveolar surface, which reduces friction and protects the oral mucosa, which is not only fast and perfect, but also comfortable process.

In general, ceramic self-ligating brackets are the best orthodontic choice for fashion and beauty lovers, which can quickly complete the orthodontic process in a natural and comfortable state, and help orthodontics get up early to remove their braces and smile confidently.