What should I pay attention to in the construction of glazed bricks?

1) Joints: When paving, there is a gap of 2 mm between the bricks to reduce the stress caused by the expansion and contraction of the tiles.

2) Corner treatment: When cornering, the edge of the yin corner is first scratched out with a glass knife to grind off the glaze, so as not to collapse the porcelain and affect the appearance.

3) Dislocation paving treatment: In order to achieve a certain artistic effect, the dislocation paving is adopted, and the dislocation paving should pay attention to leaving an extra 1 mm seam on the basis of the original seam.

4) The processing of the combined flower piece: the combined picture that indicates the direction is paved in the order of the direction indicated on the back of the flower piece; If there is no prompt direction, it means that it can be combined at will, and at this time, it can be designed according to the overall atmosphere.

Note: It is normal to have a slight color change between the flower and the tile.

5) Tile cutting treatment: The cut tiles should be laid in the corners and not visible.

glazed tiles. The eye is facing inward. Try to avoid sticking it on the wall**, which will affect the appearance. If it cannot be avoided, the cut surface should be kept neat and the edges should not be rotten.

6) Selection of cement: the hardness of cement can not be higher than 400, so as not to break the glaze and produce porcelain collapse.

7) Handling of abnormal situations: If you encounter abnormal situations, you should immediately contact the first business.

8) What is the difference between ground construction and wall construction?

In general, the floor is laid first, and then the wall. The surface contact between the side of the wall tile and the floor tile.

9) Do not cover the ground with packing paper.

After the paper of the packing box is used up, do not cover the ground with it, so as to avoid the packing box being soaked in water and the organic pigments polluting the ground, causing trouble in cleaning. Colorless snakeskin bags should be used to cover the ground.

10) Cleaning of cement slurry: 1:10 solution of dilute hydrochloric acid or dilute oxalic acid.

Cleaning of cement slurry: 1:10 solution of dilute hydrochloric acid or dilute oxalic acid. The glazed tile is beautiful and generous, noble and elegant, and it is easy to clean and maintain, but it is afraid of acid, water and stains. I saw it on the No. 1 Home Network before.

Laying glazed floor tiles needs to be done in accordance with the correct construction steps to make the laying effect more perfect. Next, let pchouse talk to you about the steps of glazed floor tile laying.

1. Immersion. Soak the glazed floor tiles in water for 3-5 hours, and let the tiles return to the tung to stare straight. Avoid uneven immersion resulting in large differences in tile flatness, and do not search for construction.

2. Leveling. First of all, remove the dirt on the surface, and the uneven places should be leveled with cement mortar mixture, and then paved after the leveling layer is completely dry.

3. When the base layer is a concrete wall, a 108 glue slurry should be brushed as a binding layer, and then the bottom ash should be wiped after 2 days, and the bottom ash layer requires a smooth surface and a vertical surface.

4. Paving. Pre-arrangement generally starts from the sunny corner, the non-whole bricks are arranged in the secondary part, or the corner of the wall, and the waste tile is plastered with cement mixed mortar as a marker, and the spacing of the marker block is 1, and the supporting board is hung straight by the ruler to control the surface flatness. Spray enough water on the screed, take out the water-soaked porcelain tiles in the water, wipe off the water stains, and evenly touch 1:1 on the back of the brick

3 or so cement mortar, mixed number below 200, mortar thickness of 5-6 mm is appropriate, paving large-size porcelain appropriate thickening, then the brick pasted, with a mallet or rubber hammer gently patted flat, to avoid hollowing, and at any time with a ruler or level level.

5. Trimming. After pasting a certain area, fill and scrape the brick joint with cement mortar, and finally remove the dirt on the brick surface and strengthen the maintenance.

Glazed tile is a kind of floor tile that is more commonly used in our modern life, with rich color pattern design, good decorative effect, and very easy to clean, which is a very good raw material. Of course, glazed tiles are becoming more and more popular, and the natural production of well-known brands is uneven, so you must pay attention to it in the case of purchasing. What are the common problems in the purchase of glazed tiles?

Below, I will explain in detail the four common problems of glazed ceramic tile purchase.

What is glazed brick?

Glazed tiles are made of English tiles by continuous high temperature suppression, and the key to this kind of tile is the soil embryo and the glaze layer on the surface of the part of the English tile, and the key is divided into two categories. Glazed bricks are through the advantages and disadvantages of the surface to identify the quality of the product, generally speaking, the better glazed bricks are very balanced, leveled, smooth and beautiful color, the surface is not particulate matter and its convex and concave inequality is generated, and the goods are mild and comfortable, so they are loved by everyone.

What are the common problems in the purchase of glazed tiles?

1. In the case of purchasing glazed tiles, we must pay attention to whether the specifications of the tiles are standard, whether the nearby is leveling, whether the thickness can be symmetrical, generally speaking, the same size of tiles should not be more than two millimeters apart, and the thickness of the general good floor tiles is around eight millimeters, and the color bias is not very large.

2. In the case of purchasing glazed tiles, you need to pay attention to the level mark, generally speaking, the tiles are divided into five different levels, the price is of course different, in addition, it is necessary to pay attention to the purchase of glazed tiles in the case of the outer packaging on the logo specifications and models, the color is not consistent, generally speaking, reliable packaging design with a certificate of conformity, quality inspection report, etc.

3. Pay attention to the specifications and sizes for the purchase of glazed tiles, the standard specifications are not only helpful for engineering construction, but also the decorative effect is particularly good. Generally speaking, the error of good tiles is not large, and the actual effect after paving is very neat, it should be noted that if the size error of the goods is exceeded, these goods are not very good, the difficulty coefficient of engineering construction is relatively large, and the effect of home decoration is very poor. In addition, in the case of purchasing glazed tiles, it is necessary to pay attention to whether the four corners of the product are uniform bevels.

4. For the purchase of glazed tiles, it is not only necessary to pay attention to the surface quality, but also the pattern design and color of the product are very important. Generally speaking, the texture and pattern design of good glazed brick tiles are particularly refreshing and consistent, and the overall processing technology is very exquisite, and there is no significant displacement and displacement.

Don't go fishing until it rains, because it's very hot, so you will be near the surface of the water and won't bite the hook. Do not fish during thunderstorms and heavy rains. Because of this kind of weather, fishing in the wild is very dangerous, and at this time the fish will hide and not easy to fall.

Don't fish when it's raining. Don't fish when it's raining, and don't fish when it's foggy.

This refers to a kind of brick with a relatively smooth surface, and you must pay attention to the color, thickness, and wear resistance.

The surface of the brick has been pressed at high temperature with different patterns, and the surface looks very smooth. First of all, it is necessary to see how the water absorption of the glazed brick is, whether the surface is bright and crystalline, and whether the brick is good or not.

For the owners of the renovation, a lot of knowledge about the decoration of the celery orange is ambiguous. Therefore, in the choice we will come out with many problems, such as glazed tiles for interior walls.

Glazed tiles for interior walls. Commonly known as ceramic tiles, it is called glazed tiles because there is a layer of glaze hanging on the surface of fine pottery. The glazed tiles have smooth glazes and colorful patterns, including monochrome, printed, and high-art patterns.

Glazed tiles have the characteristics of non-stain absorption, corrosion resistance and easy cleaning, so they are mostly used in kitchens and bathrooms. The water absorption rate of glazed bricks is high (the state stipulates that its water absorption rate is less than 21%), after the water absorption and expansion of the ceramic body, the surface glaze with small moisture absorption and expansion is in a state of tension pressure, and long-term freezing and thawing, there will be peeling off and peeling phenomenon, so it can not be used outdoors.

Paving construction method of glazed bricks (porcelain tiles) for interior walls.

Precautions before paving:

When paving, pay attention to the different grades, specifications, color numbers and patterns of porcelain tiles, in addition to the special decorative effects intentionally pursued, the same room should be paved with the same grade, specification and color of porcelain.

Before leveling and paving porcelain tiles, the wall of the building to be paved should be treated, the surface dirt should be removed, and sprinkled with water to moisten, and then leveled with cement mortar, and the leveling layer should be completely dry before paving.

Reserve according to actual needs.

When paving the porcelain tiles, a 2mm 3mm ash joint should be reserved between the porcelain tiles according to the actual needs of the ruler group, so as to prevent the thermal expansion and contraction coefficient between the wall, the porcelain tiles and the pasting layer from being inconsistent and the porcelain tiles from detaching and hollowing, resulting in construction quality accidents.

Elastic line According to the design and paving requirements, determine the brick arrangement scheme, and pop up the porcelain tile position and brick joint position line on the dry screed layer.

Paving The porcelain tiles to be paved are soaked in clean water for about 1 hour until they do not bubble, and then they are taken out, wiped dry the water stains, sprayed enough water on the screed, and then evenly smeared about 1:2 cement mortar on the back of the brick (cement with qualified ordinary <>

After trimming a certain area, fill and scrape the brick joint with cement slurry (white cement slurry, gypsum slurry, etc.); Finally, the dirt on the brick surface should be removed and the care should be strengthened.

The above is the content of the X group Aifuwo decoration network to introduce you to the tile, thank you for reading.